Hello, I'm working on setting up Bacula 2.4.2 with the current version of vchanger 0.8.2 from Sourceforge, using USB drives on CentOS 5.2. Everything is going pretty much as described in the vchanger HowTo, however "label barcodes" fails. the following is from console in BAT, after attaching USB drive:
update slots Select Storage resource (1-2): Connecting to Storage daemon usbbcla1 at p-plover:9103 ... 3306 Issuing autochanger "slots" command. Device "usbchanger" has 9 slots. Connecting to Storage daemon usbbcla1 at p-plover:9103 ... 3306 Issuing autochanger "list" command. Volume "usbbcla1_0001_0001" not found in catalog. Slot=1 InChanger set to zero. Volume "usbbcla1_0001_0002" not found in catalog. Slot=2 InChanger set to zero. ................... Volume "usbbcla1_0001_0008" not found in catalog. Slot=8 InChanger set to zero. Volume "usbbcla1_0001_0009" not found in catalog. Slot=9 InChanger set to zero. label barcodes Connecting to Storage daemon usbbcla1 at p-plover:9103 ... Sending label command for Volume "usbbcla1_0001_0001" Slot 1 ... 3301 Issuing autochanger "loaded? drive 0" command. 3302 Autochanger "loaded? drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 1, drive 0" command. 3305 Autochanger "load slot 1, drive 0", status is OK. 3000 OK label. VolBytes=221 DVD=0 Volume="usbbcla1_0001_0001" Device="usbchanger-drive-0" (/var/lib/bacula/usbbcla1/drive0) Catalog record for Volume "usbbcla1_0001_0001", Slot 1 successfully created. Sending label command for Volume "usbbcla1_0001_0002" Slot 2 ... 3307 Issuing autochanger "unload slot 1, drive 0" command. 3304 Issuing autochanger "load slot 2, drive 0" command. 3305 Autochanger "load slot 2, drive 0", status is OK. 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" Label command failed for Volume usbbcla1_0001_0002. Sending label command for Volume "usbbcla1_0001_0003" Slot 3 ... .......... 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" Label command failed for Volume usbbcla1_0001_0008. Sending label command for Volume "usbbcla1_0001_0009" Slot 9 ... 3307 Issuing autochanger "unload slot 8, drive 0" command. 3304 Issuing autochanger "load slot 9, drive 0" command. 3305 Autochanger "load slot 9, drive 0", status is OK. 3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001" Label command failed for Volume usbbcla1_0001_0009. I tried running a job just to see what would happen. usbbcla1_0001_0001 filled successfully and then bacula asked for a new volume but said no volumes could be found. Bacula seems to have labeled the first volume in "slot 1" of the "magazine" successfully. But every attempt to label the next volume in the next "slot" failed saying the first volume is already labeled. Any thoughts as to what could be going wrong here are greatly appreciated! Thanks! -- Thomas E. Plancon CAD/IS Manager B K A Architects, Inc. 142 Crescent Street Brockton, MA 02302 tel: 508 . 583 . 5603 ext 313 fax: 508 . 584 . 2914 www.bkaarchitects.com <http://www.bkaarchs.com/> ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
