>>>>> On Sat, 02 May 2009 01:24:57 +0200, SZÉKELYI Szabolcs said: > > Martin Simmons wrote: > >>>>>> On Wed, 29 Apr 2009 16:45:17 +0200, SZÉKELYI Szabolcs said: > >> Hi, > >> > >> We configured our tape storage with > >> > >> Two EOF = Yes > >> BSF at EOM = Yes > >> > >> and found that this works fine as long as the tape is not ejected and > >> reloaded. After that, Bacula complains about number of files on the > >> volume not matching that recorded in the catalog. > > > > What is the number of files on the volume and the catalog in the error > > message? > > Bacula says it can find only 686 files on the tape while there sould be > 687. Here's the exact log from Bacula: > > ---8<------------------------------------------------ > 10-Apr 22:55 bacula-sd JobId 93: 3307 Issuing autochanger > "unload slot 25, drive 1" command. > 10-Apr 22:57 bacula-dir JobId 93: Using Device "bacula-LTO3-0-Device" > 10-Apr 22:57 bacula-sd JobId 93: 3301 Issuing autochanger > "loaded? drive 1" command. > 10-Apr 22:57 bacula-sd JobId 93: 3302 Autochanger > "loaded? drive 1", result: nothing loaded. > 10-Apr 22:57 bacula-sd JobId 93: 3304 Issuing autochanger > "load slot 21, drive 1" command. > 10-Apr 22:58 bacula-sd JobId 93: 3305 Autochanger > "load slot 21, drive 1", status is OK. > 10-Apr 22:58 bacula-sd JobId 93: Volume "000021" previously written, > moving to end of data. > 10-Apr 22:59 bacula-sd JobId 93: Error: Bacula cannot write on tape > Volume "000021" because: > The number of files mismatch! Volume=686 Catalog=687 > 10-Apr 22:59 bacula-sd JobId 93: Marking Volume "000021" > in Error in Catalog. > 10-Apr 22:59 bacula-sd JobId 93: 3307 Issuing autochanger > "unload slot 21, drive 1" command. > ---8<------------------------------------------------
It looks like some data has been lost from the tape, maybe because it was overwritten. That could happen if the Two EOF setting is wrong. > > Which operating system and version of Bacula? > > The OS is CentOS 5.3. > > Since we were unable to find official packages for CentOS, our > installation of Bacula is a simple rebuild of > bacula-2.4.4-1.fc10.src.rpm found in the Fedora source repository. Why are you using Two EOF with this device? The recommended setup for Linux systems is Two EOF = No BSF at EOM = No __Martin ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
