Hi folks... I have configurate bacula to make a backup to a Sony SDX-570V, and I get success to label a tape to lexmark-dat-full...
However, when I run status storage against this tape, I get this: Device "DAT-LEXMARK" (/dev/st0) is mounted with: Volume: lexmark-dat-full Pool: *unknown* Media type: SDX-570V-LEXMARK Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512 Positioned at File=0 Block=0 I see that there is no pool associated with the device. But, when I run list pools command, from bconsole: list pools Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" +--------+------------------+---------+---------+----------+-------------+ | PoolId | Name | NumVols | MaxVols | PoolType | LabelFormat | +--------+------------------+---------+---------+----------+-------------+ | 1 | brother | 1 | 0 | Backup | * | | 2 | trellis | 1 | 0 | Backup | * | | 3 | ricoh-full | 1 | 0 | Backup | * | | 4 | ricoh-dif | 1 | 0 | Backup | * | | 5 | dlink-full | 1 | 0 | Backup | * | | 6 | dlink-dif | 1 | 0 | Backup | * | | 7 | ricoh-dat-full | 1 | 0 | Backup | * | | 10 | dlink-dat-full | 1 | 0 | Backup | * | | 11 | lexmark-dat-full | 1 | 0 | Backup | * | +--------+------------------+---------+---------+----------+-------------+ The pool is there, and the lexmark-dat-full appears also... Perhaps is my missconfiguration, but I can not figure out how the status storage do not show me the pool... Thanks for any help Gilberto Nunes Ferreira TI Selbetti Gestão de Documentos Telefone: +55 (47) 3441-6004 Celular: +55 (47) 8861-6672 ------------------------------------------------------------------------------ SOLARIS 10 is the OS for Data Centers - provides features such as DTrace, Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW http://p.sf.net/sfu/solaris-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users