Hi, I am testing 5.0.1 on a new server with a SAS LTO-3 drive, and Ubuntu Lucid. Btape says the test succeeded and then says it failed. Did it fail?
Wrote block=1640000, file,blk=99,14449 VolBytes=424,668,823,552 rate=49.10 MB/s 22-Apr 16:51 btape JobId 0: End of Volume "TestVolume1" at 100:2157 on device "Tape" (/dev/nst0). Write of 262144 bytes got -1. 22-Apr 16:51 btape JobId 0: Re-read of last block succeeded. btape: btape.c:2701 Last block at: 100:2156 this_dev_block_num=2157 btape: btape.c:2736 End of tape 100:0. Volume Bytes=425,741,254,656. Write rate = 49.05 MB/s btape: btape.c:2311 Wrote 1000 blocks on second tape. Done. Done writing 0 records ... btape: btape.c:2380 Wrote state file last_block_num1=2156 last_block_num2=0 btape: btape.c:2395 16:51:11 Done filling tape at 100:0. Now beginning re-read of tape ... btape: btape.c:2476 Enter do_unfill 22-Apr 16:51 btape JobId 0: Ready to read from volume "TestVolume1" on device "Tape" (/dev/nst0). Rewinding. Reading the first 10000 records from 0:0. 10000 records read now at 1:1251 Reposition from 1:1251 to 100:2156 Reading block 2156. The last block on the tape matches. Test succeeded. btape: btape.c:2403 do_unfill failed. ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users