Hello, I have read and reread dozens of threads on this board and at this stage am at my wit's end. I would really appreciate any help that anyone could give me.
My setup is as follows : bacula 5.0.1 running on a Debian Lenny server(server1)Bacula MSL 6000 LTO autochanger with 30 slots and one drive on a separate Debian Lenny server(server2) various Linux clients Everything works and overall, I am very impressed with Bacula. It is very fast, very stable and has not let me down. It performs better and is much more flexible than a number of commercial products that I have used in the past. However, for the life of me, I cannot see how to move a tape from the MSL 6000 drive back to the slot from which it was taken, once the backup job is finished. This is not a problem for me during the week. However, I change my tapes every Friday and I have to stop the bacula-sd daemon on server2 and then manually move it using the front panel on the MSL 6000. After that, I start up the bacula-sd daemon again on server2 and I am back in business. i never have to go anywhere near server1. I am going on holidays soon and need to change this, such that all tapes are back in their slots, so that my holiday cover doesn't have to log into server2 at all. I have tried the "Unmount on offline" directive, but that just seems to lock up the drive itself. Any help would be greatly appreciated. Thanks. +---------------------------------------------------------------------- |This was sent by taisg...@hotmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
