On Tue, 8 Jun 2010 13:59:32 -0700 "Jeremiah D. Jester" <jj...@u.washington.edu> wrote:
> > I've just bacula is working state where it can connect to clients and the > the required daemons. I'm now trying to prepare a volume to write too via > bconsole. Is manual load usually required for bacula or is this a > configuration issue? > > Thanks. > JJ > > *label > Automatically selected Catalog: MyCatalog > Using Catalog "MyCatalog" > The defined Storage resources are: > 1: File > 2: Tape > Select Storage resource (1-2): 2 > Enter autochanger drive[0]: > Enter new Volume name: Offsite-Vol1-6-8-10 > Enter slot (0 or Enter for none): > Defined Pools: > 1: Catalog > 2: Offsite > 3: Onsite > 4: Scratch > Select the Pool (1-4): 2 > Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ... > Sending label command for Volume "Offsite-Vol1-6-8-10" Slot 0 ... > Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0). > Manual load may be required. > 3301 Issuing autochanger "loaded? drive 0" command. > 3302 Autochanger "loaded? drive 0", result: nothing loaded. > 3910 Unable to open device "Drive1" (/dev/st0): ERR=dev.c:491 Unable to open > device "Drive1" (/dev/st0): ERR=No medium found > > Label command failed for Volume Offsite-Vol1-6-8-10. > Do not forget to mount the drive!!! > You have messages. > * You probably forgot an 'update slots'. But more generally, make sure all of the btape tests work first (see tape testing section of the manual. Regards, -- Alex Chekholko ch...@genomics.upenn.edu ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users