2010/7/5 Koldo Santisteban <ksantiste...@gmail.com>: > Good morning > > I am using Bacula 5.0.2 on CentOS 5.4. We have 2 robotic libraries, one HP > G2 autoloader and an Adic FastStor 2. Both are using HP Lto2 Drives. > On the HP library, all is working fine, tapes are marked as full when 265 Gb > are written on them , but the issue is on Adic, the tapes are marked as full > when 110 Gb are written on them. I don´t know what can i modify on bacula > configuration in order to solve it.
This is most likely not a configuration issue. However I see two unrelated problems in your configuration. " Action On Purge = Truncate" I believe is for disk pools. Also replace /dev/st0 with /dev/nst0. /dev/st0 can cause your tapes to be corrupted by being rewound without bacula knowing. > Before Bacula, i were using Backup Exec > and Adic was working fine with their tape corresponding capacity. > > This are (in my opinion, let me know please if further information is > required) the most important configurations: > Bacula believes a tape is full if it hits any errors when writing. Check your dmesg output for scsi errors. John ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
