On Fri, Jul 02, 2010 at 12:02:25PM -0400, Dan Langille wrote: > On 7/2/2010 12:00 PM, Mike Carlson wrote: > > On 06/28/2010 07:01 PM, Dan Langille wrote: > >> On 6/28/2010 12:53 PM, Mike Carlson wrote: > >>> Hello Bacula user's list, > >>> > >>> I'm having some trouble with a bacula client. The backup to a storage > >>> node (disk based storage) fails at the same file. > >> I suspect the time. Always at 1 hour 30 minutes? Firewall or switch > >> timeout ? > >> > > Hey Dan, and List, > > > > I wanted to follow up with this, Dan was correct, there was an issue > > with ALL traffic between the server and client, and the networking folks > > here are working to resolve it. > > > > Thanks a lot, I'm glad it wasn't software related! > > Good. To be fair, any time a back fails after the same length of time, > it is usually a network issue. Seen it mant times before. Have fun. >
It also sometimes helps (if you're on Linux and don't want to wait for the network folks to resolve and firewall issues ;-) to set the tcp_keepalive_time on the client to some smaller value: echo 600 >/proc/sys/net/ipv4/tcp_keepalive_time All the best, Uwe ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users