John, What should the timing look like? Something I can set in storage.conf in case this is the issue? Thanks, JJ
-----Original Message----- From: John Drescher [mailto:dresche...@gmail.com] Sent: Monday, July 26, 2010 4:30 PM To: Jeremiah D. Jester Cc: bacula-users Subject: Re: [Bacula-users] Error BB02. Volume created successfully? 2010/7/26 Jeremiah D. Jester <jj...@u.washington.edu>: > I'm getting a bunch of error messages stating a "Volume data error" when I > run 'label barcodes'. John Drescher advised me to rewind that tape and write > and eof to clear the data. However, in this case I did notice that the last > line of output states that it was the volume was created successfully. > Interesting enough the volume does not appear when I issue a 'status slots'. > Any thoughts on this? > > > > Here is the full error message output for one of the volumes. > > > > Thanks, > > JJ > > > > Sending label command for Volume "KL0433" Slot 14 ... > > 3307 Issuing autochanger "unload slot 13, drive 1" command. > > 3304 Issuing autochanger "load slot 14, drive 1" command. > > 3305 Autochanger "load slot 14, drive 1", status is OK. > > block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer > discarded. > > 3000 OK label. VolBytes=64512 DVD=0 Volume="KL0433" Device="Drive2" > (/dev/nst1) > > Catalog record for Volume "KL0433", Slot 14 successfully created. > > Can you look in the log for the timing. Normally the time is listed by each message. I want to see if the system is giving the load enough time. John ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://ad.doubleclick.net/clk;226879339;13503038;l? http://clk.atdmt.com/CRS/go/247765532/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
