On 10/20/2010 9:24 PM, Richard Scobie wrote: > Bacula 5.0.2 Linux. > > I have a number of Jobs, written to LTO4 tape on a host, backup1, which > I am trying to restore from with the tapes loaded in a host called > flash. Director is running on host library1.
The subject line appears misleading. It makes me think you're trying to take a backup of box A and restore it to Box B. This is rather straight forward. Instead, what you're saying is: - backup of Box A was done to Storage Daemon backup1 - tape was then moved to Storage Daemon flash Does the Director know that the tape has moved from one system to another? > These restores are failing with either an error: > > "RestoreFiles.2010-10-21_13.54.01_08 is waiting on max Storage jobs", > and there are no other jobs pending, or fail completely with "Fatal Error". > > All bacula fds,sds and director have been restarted a number of times. > Below is a typical fatal error scenario: > > "restore jobid="345" client="backup1-fd_arc" > file="?restore_476707713_16" done > > 1 file selected to be restored. > > Bootstrap records written to /var/bacula/library1-dir.restore.1.bsr > > The job will require the following > Volume(s) Storage(s) SD Device(s) > =========================================================================== > > AR0030L4 HP_MSL2024 HP_MSL2024 > > NOTE: HP_MSL2024 is attached to backup1 and job is modified to set flash > as the restore client and storage: This reads right to me. > > .mod restoreclient="flash-fd_arc" fileset="Full Set" > storage="flash_LTO-4" replace="always" when="2010-10-21 12:00:30" > bootstrap="/var/bacula/library1-dir.restore.1.bsr" > where="/mnt/storage1/share/bacula/restores" priority="10" yes > Job queued. JobId=466 > > NOTE: A "status" shows: > > Select daemon type for status (1-4): library1-dir Version: 5.0.2 (28 > April 2010) x86_64-unknown-linux-gnu redhat > Daemon started 21-Oct-10 11:56, 0 Jobs run since started. > Heap: heap=135,168 smbytes=85,035 max_bytes=1,096,857 bufs=360 > max_bufs=365 > Full Backup 11 22-Oct-10 09:10 BackupCatalog > Catalog2 > 466 RestoreFiles.2010-10-21_12.00.58_04 is waiting > on Storage flash_LTO-4 > > NOTE: the requested volume is then mounted: > > Select Storage resource (1-3): 3001 Mounted Volume: AR0030L4 > 3001 Device "flash_LTO-4" (/dev/nst0) is mounted with Volume "AR0030L4" > > NOTE: At this point the job fails with a fatal error. > > 21-Oct 12:01 library1-dir JobId 466: Start Restore Job > RestoreFiles.2010-10-21_12.00.58_04 > 21-Oct 12:05 library1-dir JobId 466: Using Device "flash_LTO-4" > 21-Oct 12:05 flash-sd JobId 466: Fatal error: No Volume names found for > restore. > 21-Oct 12:05 flash-fd JobId 466: Fatal error: job.c:2004 Bad response to > Read Data command. Wanted 3000 OK data > , got 3000 error > > 21-Oct 12:05 library1-dir JobId 466: Using Device "Drive-1" > 21-Oct 12:05 flash-fd JobId 466: Fatal error: Failed to authenticate > Storage daemon. > 21-Oct 12:05 library1-dir JobId 466: Fatal error: Bad response to > Storage command: wanted 2000 OK storage > , got 2902 Bad storage > > 21-Oct 12:05 library1-dir JobId 466: Error: Bacula library1-dir 5.0.2 > (28Apr10): 21-Oct-2010 12:05:07 > Build OS: x86_64-unknown-linux-gnu redhat > JobId: 466 > Job: RestoreFiles.2010-10-21_12.00.58_04 > Restore Client: flash-fd_arc > Start time: 21-Oct-2010 12:01:00 > End time: 21-Oct-2010 12:05:07 > Files Expected: 1 > Files Restored: 0 > Bytes Restored: 0 > Rate: 0.0 KB/s > FD Errors: 0 > FD termination status: > SD termination status: Waiting on FD > Termination: *** Restore Error *** > > 21-Oct 12:05 library1-dir JobId 466: Error: Bacula library1-dir 5.0.2 > (28Apr10): 21-Oct-2010 12:05:07 > Build OS: x86_64-unknown-linux-gnu redhat > JobId: 466 > Job: RestoreFiles.2010-10-21_12.00.58_04 > Restore Client: flash-fd_arc > Start time: 21-Oct-2010 12:01:00 > End time: 21-Oct-2010 12:05:07 > Files Expected: 1 > Files Restored: 0 > Bytes Restored: 0 > Rate: 0.0 KB/s > FD Errors: 1 > FD termination status: > SD termination status: Waiting on FD > Termination: *** Restore Error *** > > I don't understand here why it attempts to use "Drive-1", which is the > drive on the creation host, backup1. My guess: because that's where the Catalog says is it? > > Am I missing something basic here? All the jobs tried restore OK on > backup1, where they were created. > > Regards, > > Richard > > > ------------------------------------------------------------------------------ > Nokia and AT&T present the 2010 Calling All Innovators-North America contest > Create new apps& games for the Nokia N8 for consumers in U.S. and Canada > $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing > Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store > http://p.sf.net/sfu/nokia-dev2dev > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > -- Dan Langille - http://langille.org/ ------------------------------------------------------------------------------ Nokia and AT&T present the 2010 Calling All Innovators-North America contest Create new apps & games for the Nokia N8 for consumers in U.S. and Canada $10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store http://p.sf.net/sfu/nokia-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
