Hi at all,
since some weeks I got a new SCSI controller due to use a second tape
reader into the HP MSL6030 (a Overland NEO 2000 clone) tape library.
After some initially troubles and a some telephonic shout with HP
support, now I'm able to use both internal reader (nst0 and nst1) and to
control the autocharger (sg1).
Actually I've defined two test pools: IncrWeek and WinIncrWeek. My goal
is to get two simultaneous backups from two different client onto two
tapes, one for each pool.
The problem is that, when a job start gets the first drive ([0])
meanwhile the second job wait for first terminating, to use the same drive.
I've attached my sd.conf and my storage section, where's wrong?
Thanks for you time,
Simone
====== sd.conf =====
Autochanger {
Name = tl2ch
Device = tl2drv1, tl2drv2
Changer Device = /dev/sg1
Changer Command = "/etc/bacula/mtx-changer %c %o %s %a %d"
}
Device {
Name = tl2drv1
Media Type = LTO-4
Drive Index = 0
Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Device = /dev/sg1
Autochanger = yes
Autoselect = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Spool Directory = /srv/baculaspool/drive1
Maximum Spool Size = 10G
Maximum File Size = 2G
Block Positioning = no
}
Device {
Name = tl2drv2
Media Type = LTO-4
Drive Index = 1
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Device = /dev/sg1
Autochanger = yes
Autoselect = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Spool Directory = /srv/baculaspool/drive2
Maximum Spool Size = 10G
Maximum File Size = 2G
Block Positioning = no
}
=== storage ===
# MSL6030 Autochanger
Storage {
Name = TL2CH
Address = 172.20.25.28 # N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2ch
Media Type = LTO-4
Autochanger = Yes
Maximum Concurrent Jobs = 20
}
# Internal drive1
Storage {
Name = TL2DRV1
Address = 172.20.25.28 # N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2srv1
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
# Internal drive2
Storage {
Name = TL2DRV2
Address = 172.20.25.28 # N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2srv2
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
