On Thu, May 12, 2011 at 10:35:29AM -0500, Jake Debord wrote: > Sure, here you go:
I don't think your fileset is connected to your job. If you are using fileset WinXPTest and job XPtest, then job XPtest should have: FileSet = "WinXPTest" whereas it currently has: FileSet = "Full Set" > # > # Default Bacula Director Configuration file > # > # The only thing that MUST be changed is to add one or more > # file or directory names in the Include directive of the > # FileSet resource. > # > # For Bacula release 5.0.2 (28 April 2010) -- ubuntu 10.10 > # > # You might also want to change the default email address > # from root to your address. See the "mail" and "operator" > # directives in the Messages resource. > # > > Director { # define myself > Name = DoraleeII-dir > DIRport = 9101 # where we listen for UA connections > QueryFile = "/etc/bacula/scripts/query.sql" > WorkingDirectory = "/var/lib/bacula" > PidDirectory = "/var/run/bacula" > Maximum Concurrent Jobs = 1 > Password = "*********" # Console password > Messages = Daemon > #DirAddress = 127.0.0.1 > } > > JobDefs { > Name = "DefaultJob" > Type = Backup > Level = Incremental > Client = DoraleeII-fd > FileSet = "Full Set" > Schedule = "WeeklyCycle" > Storage = File > Messages = Standard > Pool = File > Priority = 10 > Write Bootstrap = "/var/lib/bacula/%c.bsr" > } > > > # > # Define the main nightly save backup job > # By default, this job will back up to disk in > /nonexistant/path/to/file/archive/dir > Job { > Name = "BackupClient1" > JobDefs = "DefaultJob" > } > > #Job { > # Name = "BackupClient2" > # Client = DoraleeII2-fd > # JobDefs = "DefaultJob" > #} > > # Backup the catalog database (after the nightly save) > Job { > Name = "BackupCatalog" > JobDefs = "DefaultJob" > Level = Full > FileSet="Catalog" > Schedule = "WeeklyCycleAfterBackup" > # This creates an ASCII copy of the catalog > # Arguments to make_catalog_backup.pl are: > # make_catalog_backup.pl <catalog-name> > RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" > # This deletes the copy of the catalog > RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" > Write Bootstrap = "/var/lib/bacula/%n.bsr" > Priority = 11 # run after main backup > } > > # > # Standard Restore template, to be changed by Console program > # Only one such job is needed for all Jobs/Clients/Storage ... > # > Job { > Name = "RestoreFiles" > Type = Restore > Client=DoraleeII-fd > FileSet="Full Set" > Storage = File > Pool = Default > Messages = Standard > Where = /nonexistant/path/to/file/archive/dir/bacula-restores > } > > > # List of files to be backed up > FileSet { > Name = "Full Set" > Include { > Options { > signature = MD5 > } > # > # Put your list of files here, preceded by 'File =', one per line > # or include an external list with: > # > # File = <file-name > # > # Note: / backs up everything on the root partition. > # if you have other partitions such as /usr or /home > # you will probably want to add them too. > # > # By default this is defined to point to the Bacula binary > # directory to give a reasonable FileSet to backup to > # disk storage during initial testing. > # > # File = /usr/sbin > } > > # > # If you backup the root directory, the following two excluded > # files can be useful > # > Exclude { > File = /var/lib/bacula > File = /nonexistant/path/to/file/archive/dir > File = /proc > File = /tmp > File = /.journal > File = /.fsck > } > } > > # > # When to do the backups, full backup on first sunday of the month, > # differential (i.e. incremental since full) every other sunday, > # and incremental backups other days > Schedule { > Name = "WeeklyCycle" > Run = Full 1st sun at 23:05 > Run = Differential 2nd-5th sun at 23:05 > Run = Incremental mon-sat at 23:05 > } > > # This schedule does the catalog. It starts after the WeeklyCycle > Schedule { > Name = "WeeklyCycleAfterBackup" > Run = Full sun-sat at 23:10 > } > > # This is the backup of the catalog > FileSet { > Name = "Catalog" > Include { > Options { > signature = MD5 > } > File = "/var/lib/bacula/bacula.sql" > } > } > > # Client (File Services) to backup > Client { > Name = DoraleeII-fd > Address = localhost > FDPort = 9102 > Catalog = MyCatalog > Password = "**********" # password for FileDaemon > File Retention = 30 days # 30 days > Job Retention = 6 months # six months > AutoPrune = yes # Prune expired Jobs/Files > } > > # > # Second Client (File Services) to backup > # You should change Name, Address, and Password before using > # > #Client { > # Name = DoraleeII2-fd > # Address = localhost2 > # FDPort = 9102 > # Catalog = MyCatalog > # Password = "uDZsFQvCq2wvRs986stkk77AEKvrEoWL-2" # password > for FileDaemon 2 > # File Retention = 30 days # 30 days > # Job Retention = 6 months # six months > # AutoPrune = yes # Prune expired Jobs/Files > #} > > > # Definition of file storage device > Storage { > Name = File > # Do not use "localhost" here > Address = 10.0.6.103 > SDPort = 9102 > Password = ******** > Device = FileStorage > Media Type = File > Maximum Concurrent Jobs = 10 > } > > > > # Definition of DDS tape storage device > #Storage { > # Name = DDS-4 > # Do not use "localhost" here > # Address = localhost # N.B. Use a fully qualified name here > # SDPort = 9103 > # Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn" # password > for Storage daemon > # Device = DDS-4 # must be same as Device in > Storage daemon > # Media Type = DDS-4 # must be same as MediaType in > Storage daemon > # Autochanger = yes # enable for autochanger device > #} > > # Definition of 8mm tape storage device > #Storage { > # Name = "8mmDrive" > # Do not use "localhost" here > # Address = localhost # N.B. Use a fully qualified name here > # SDPort = 9103 > # Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn" > # Device = "Exabyte 8mm" > # MediaType = "8mm" > #} > > # Definition of DVD storage device > #Storage { > # Name = "DVD" > # Do not use "localhost" here > # Address = localhost # N.B. Use a fully qualified name here > # SDPort = 9103 > # Password = "mWlTPo7Qv_FvQgignt89iLcNuHIZFCpZn" > # Device = "DVD Writer" > # MediaType = "DVD" > #} > > > # Generic catalog service > Catalog { > Name = MyCatalog > # Uncomment the following line if you want the dbi driver > # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = > dbname = bacula; DB Address = ""; dbuser = "**********"; dbpassword > = "************" > } > > # Reasonable message delivery -- send most everything to email address > # and to the console > Messages { > Name = Standard > # > # NOTE! If you send to two email or more email addresses, you will need > # to replace the %r in the from field (-f part) with a single valid > # email address in both the mailcommand and the operatorcommand. > # What this does is, it sets the email address that emails would display > # in the FROM field, which is by default the same email as they're being > # sent to. However, if you send email to more than one address, then > # you'll have to set the FROM address manually, to a single address. > # for example, a 'no-re...@mydomain.com', is better since that tends to > # tell (most) people that its coming from an automated source. > > # > mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) > \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" > operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f > \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" > mail = root@localhost = all, !skipped > operator = root@localhost = mount > console = all, !skipped, !saved > # > # WARNING! the following will create a file that you must cycle from > # time to time as it will grow indefinitely. However, it will > # also keep all your messages if they scroll off the console. > # > append = "/var/lib/bacula/log" = all, !skipped > catalog = all > } > > > # > # Message delivery for daemon messages (no job). > Messages { > Name = Daemon > mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) > \<%r\>\" -s \"Bacula daemon message\" %r" > mail = root@localhost = all, !skipped > console = all, !skipped, !saved > append = "/var/lib/bacula/log" = all, !skipped > } > > # Default pool definition > Pool { > Name = Default > Pool Type = Backup > Recycle = yes # Bacula can automatically recycle > Volumes > AutoPrune = yes # Prune expired volumes > Volume Retention = 365 days # one year > } > > # File Pool definition > Pool { > Name = File > Pool Type = Backup > Recycle = yes # Bacula can automatically recycle > Volumes > AutoPrune = yes # Prune expired volumes > Volume Retention = 365 days # one year > Maximum Volume Bytes = 50G # Limit Volume size to something > reasonable > Maximum Volumes = 100 # Limit number of Volumes in Pool > } > > > # Scratch pool definition > Pool { > Name = Scratch > Pool Type = Backup > } > > # > # Restricted console used by tray-monitor to get the status of the director > # > Console { > Name = DoraleeII-mon > Password = "yklPd1FbkymAEbSSZ3MrHD6zUI3ZG3EWP" > CommandACL = status, .status > } > Client { > Name = jake-laptop-fd > Password = ********** > Address = 10.0.6.107 > FDPort = 9102 > Catalog = MyCatalog > File Retention = 30 days > Job Retention = 6 months > } > FileSet { > Name = WinXPTest > Include { > File = C:/jaketestfolder > Options { > } > } > } > Job { > Name = XPtest > Type = Backup > Level = Incremental > Client = jake-laptop-fd > FileSet = "Full Set" > Schedule = WeeklyCycle > Storage = File > Pool = Default > Messages = Standard > } > > > On Thu, May 12, 2011 at 10:30 AM, John Drescher <dresche...@gmail.com> wrote: > > On Thu, May 12, 2011 at 11:28 AM, Jake Debord <jake.deb...@gmail.com> wrote: > >> Ok edited the conf directly and reloaded through bconsole. > >> Any other Ideas? > >> Same error: > >> > > > > Can you post your bacula-dir.conf? > > > > You can zap the passwords if you want. > > > > > > John > > > > ------------------------------------------------------------------------------ > Achieve unprecedented app performance and reliability > What every C/C++ and Fortran developer should know. > Learn how Intel has extended the reach of its next-generation tools > to help boost performance applications - inlcuding clusters. > http://p.sf.net/sfu/intel-dev2devmay > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users