On Wed, May 25, 2011 at 10:27 AM, Andre Lorenz <an...@ns-cw.net> wrote: > Hello together, > > i have a NEC-LTO4 (FC) 40 slots changer, and 8 slot LTO2 (8 Slots) > changer (SCSI). > > this one was working perfectly. > > after physical move of the changers and servers i cant run anymore > update slots scan on the LTO4 :-( > on the old LTO2 i can run it without any problems. > > lsscsi will show both both devices. > [1:0:0:0] mediumx NEC LL0101H-0A 0002 /dev/sch0 > [1:0:1:0] tape IBM ULTRIUM-TD2 38D0 /dev/st0 > [2:0:0:0] tape IBM ULTRIUM-TD4 7A31 /dev/st1 > [2:0:1:0] tape IBM ULTRIUM-TD4 7A31 /dev/st2 > [2:0:1:1] mediumx NEC T40A2 0005 /dev/sch1 > > i also checked config if device-name changed, .... > > on the lto2 the command runs without any problems. > > on the LTO4 i am getting following msg: > > Connecting to Storage daemon NEC-LTO4 at frabackup01:9103 ... > 3306 Issuing autochanger "slots" command. > Device "ULTRIUM-TD4-1" has 0 slots. > No slots in changer to scan. > > i also rebooted / restarted changer, server,services ........... > > there is also no output inside logs. > > now is there somebody with an idea? >
I believe it could be a permissions problem or you have the wrong device for the autochanger in your config. I would execute the mtx-changer script directly logged in as user bacula and examine the output.. John ------------------------------------------------------------------------------ vRanger cuts backup time in half-while increasing security. With the market-leading solution for virtual backup and recovery, you get blazing-fast, flexible, and affordable data protection. Download your free trial now. http://p.sf.net/sfu/quest-d2dcopy1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users