On Thu, Dec 8, 2011 at 11:19 AM, Mingus Dew <[email protected]> wrote: > Thank you > > On Thu, Dec 8, 2011 at 10:20 AM, John Drescher <[email protected]> wrote: >>> Job A in Pool A writing to Tape 0 can run at that same time as Job B >>> in Pool B writing on Tape 1 >>> >> Yes. That should work (and does for me) without much fuss. You get >> into a more difficult situation if you want both drives to use the >> same pool at the same time. > > Can you look at my config and see if there is any missing or incorrect > element?
I did not see anything that was obviously wrong. > I was also wondering if MaxConcurrentJobs for Devices might > need to be set. Though this seems to apply to getting 2 drives running > jobs from the same pool. > I do not think it needs to be set for devices however you do need to set it in bacula-dir.conf more than 1 time to get concurrency. I think in the director and storage resources are needed at minimum then possibly client resources depending on your needs. -- John M. Drescher ------------------------------------------------------------------------------ Cloud Services Checklist: Pricing and Packaging Optimization This white paper is intended to serve as a reference, checklist and point of discussion for anyone considering optimizing the pricing and packaging model of a cloud services business. Read Now! http://www.accelacomm.com/jaw/sfnl/114/51491232/ _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
