Hello,
Drive unloaded before update slots. No changes. Tomorrow will post the logs.
o_0'
On Tue, Dec 27, 2011 at 6:20 PM, Simone Caronni <negativ...@gmail.com>wrote:
> Hello,
>
> before issuing "update slots" you should do "mtx unload 0 1" on the
> console to park the tape in the first slot. According to your output the
> drive is loaded from a tape that was before in one of your empty slots.
>
> --Simone
> On Dec 27, 2011 6:12 PM, "ninyo" <ninyod...@gmail.com> wrote:
>
>> Hi simone
>>
>> */etc/bacula# mtx status*
>> * Storage Changer /dev/changer:1 Drives, 24 Slots ( 1 Import/Export )*
>> *Data Transfer Element 0:Full (Storage Element 1 Loaded)*
>> * Storage Element 1:Empty*
>> * Storage Element 2:Full*
>> * Storage Element 3:Full*
>> * Storage Element 4:Full*
>> * Storage Element 5:Full*
>> * Storage Element 6:Full*
>> * Storage Element 7:Full*
>> * Storage Element 8:Full*
>> * Storage Element 9:Full*
>> * Storage Element 10:Full*
>> * Storage Element 11:Full*
>> * Storage Element 12:Full*
>> * Storage Element 13:Full*
>> * Storage Element 14:Full*
>> * Storage Element 15:Full*
>> * Storage Element 16:Full*
>> * Storage Element 17:Empty*
>> * Storage Element 18:Full*
>> * Storage Element 19:Full*
>> * Storage Element 20:Empty*
>> * Storage Element 21:Full*
>> * Storage Element 22:Full*
>> * Storage Element 23:Full*
>> * Storage Element 24 IMPORT/EXPORT:Full*
>>
>> Once executed, i run again:
>>
>> *"update slots=1-24 storage=cinta scan"*
>> *
>> *
>> Same results. Im using MySQL.
>>
>> Rgds
>>
>> o_0'
>>
>>
>> On Tue, Dec 27, 2011 at 6:07 PM, Simone Caronni <negativ...@gmail.com>wrote:
>>
>>> It happened to me quite a few time because of a power problem in one
>>> datacenter which was cutting power to our tape library.
>>> I just updated the slot status with the mtx command outside of
>>> bconsole to make sure that the status matches what bacula thinks.
>>>
>>> I think unloading the tape in the slot with "mtx unload <sourceslot>
>>> <destslot>" and update again through bconsole should solve the
>>> problem.
>>>
>>> Regards,
>>> --Simone
>>>
>>> 2011/12/27 ninyo <ninyod...@gmail.com>:
>>> > Hello
>>> >
>>> > recently migrated from bacula 5.0.3 (from apt) to 5.2.3 (from sources)
>>> on
>>> > different hosts. Export the database, import and upgrade from script.
>>> All
>>> > goes fine, but when i try to update slots from console, i get this for
>>> all
>>> > the slots:
>>> >
>>> > 3305 Auto-cambiador "carga ranura 23, unidad 0", estado es OK.
>>> > 3001 Volumen=Incremental-03 Ranura=23
>>> > Ninguno VolName para Ranura=23 InChanger establecido en cero.
>>> >
>>> > in english :p
>>> >
>>> > No VolName for Slot=23 InChanger set to zero
>>> >
>>> > slot in list volumes are not upgraded. Bacula can read the label from
>>> the
>>> > tape, but the flag "slot" is not updated.
>>> >
>>> > I can read the label from btape:
>>> >
>>> > /etc/bacula# btape -c bacula-sd.conf /dev/nst0
>>> > Granularidad del bloque de cinta es 1024 bytes.
>>> > btape: butil.c:290 Utilizando el dispositivo: «/dev/nst0» para
>>> escritura.
>>> > 27-dic 17:44 btape JobId 0: 3301 Emitiendo comando auto-cambiador
>>> > "¿cargado? unidad 0".
>>> > 27-dic 17:44 btape JobId 0: 3302 Auto-cambiador "¿cargado? unidad 0",
>>> el
>>> > resultado es Ranura 1.
>>> > btape: btape.c:477 abrir dispositivo "drive" (/dev/nst0): OK
>>> > *readlabel
>>> > btape: btape.c:529 Etiqueta de volumen leida correctamente.
>>> >
>>> > Volumen Label:
>>> > Id : Bacula 1.0 immortal
>>> > VerNo : 11
>>> > VolName : incremental-03
>>> > PrevVolName :
>>> > VolFile : 0
>>> > LabelType : VOL_LABEL
>>> > LabelSize : 173
>>> > PoolName : Incremental
>>> > MediaType : LTO2
>>> > PoolType : Backup
>>> > HostName : HOSTNAME
>>> > Fecha de etiqueta escrito: 08-nov-2011 17:23
>>> >
>>> > The label name and pool name are OK.The volume is on the list volumes
>>> on
>>> > bconsole. Any ideas?
>>> >
>>> > Rgds.
>>> >
>>> >
>>> > o_0'
>>> >
>>> >
>>> ------------------------------------------------------------------------------
>>> > Write once. Port to many.
>>> > Get the SDK and tools to simplify cross-platform app development.
>>> Create
>>> > new or port existing apps to sell to consumers worldwide. Explore the
>>> > Intel AppUpSM program developer opportunity.
>>> appdeveloper.intel.com/join
>>> > http://p.sf.net/sfu/intel-appdev
>>> > _______________________________________________
>>> > Bacula-users mailing list
>>> > Bacula-users@lists.sourceforge.net
>>> > https://lists.sourceforge.net/lists/listinfo/bacula-users
>>> >
>>>
>>>
>>>
>>> --
>>> You cannot discover new oceans unless you have the courage to lose
>>> sight of the shore (R. W. Emerson).
>>>
>>
>>
------------------------------------------------------------------------------
Write once. Port to many.
Get the SDK and tools to simplify cross-platform app development. Create
new or port existing apps to sell to consumers worldwide. Explore the
Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join
http://p.sf.net/sfu/intel-appdev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
