Am 01.03.2012 09:30, schrieb Uwe Schuerkamp: >> Device status: >> Autochanger "HP1x8autoloader" with devices: >> "LTO-3" (/dev/nst0) >> Device "FileStorage" (/tmp) is not open. >> Device "LTO-3" (/dev/nst0) is not open. >> Device is blocked labeling a Volume. >> Drive 0 is not loaded.
>> *release LTO-3 >> 3921 Device "LTO-3" (/dev/nst0) already released. >> *unmount LTO-3 >> 3901 Device "LTO-3" (/dev/nst0) is already unmounted. >> *mount LTO-3 slot=3 >> 3903 Device "LTO-3" (/dev/nst0) is being labeled. >> * > do you see any weird error messages in "dmesg" output? Nothing since the last reboot except the normal "Block limits": [ts@backup ~]$ dmesg | tail ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Installing knfsd (copyright (C) 1996 o...@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period st0: Block limits 1 - 16777215 bytes. [ts@backup ~]$ Thanks, Tilman -- Tilman Schmidt Phoenix Software GmbH Bonn, Germany ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users