Hey all, I'm trying to set up a bacula sever to backup all machines on the network to LTO tape. I'm having a hard time getting my config to work. For starters bacula-dir wont start from the /etc/init.d/bacula-director script but it will start if I simply run bacula-dir in the terminal.
bacula-sd runs from the init script and is listening on all ip's (as determined by netstat -alnp) though I can't connect to it. I've been trying to run this for the last few weeks and I'm starting to give up, any ideas and input would be highly appreciated. I've edited out a fair bit of text just to shorten the output. Sorry for not uploading to a pastebin. Netstat: root@bacula:/var/www# netstat -alnp | grep 9103 tcp 0 0 0.0.0.0:9103 0.0.0.0:* LISTEN 17140/bacula-sd root@bacula:/var/www# Error: *status Status available for: 1: Director 2: Storage 3: Client 4: All Select daemon type for status (1-4): 2 Automatically selected Storage: bacula Connecting to Storage daemon bacula at 127.0.0.1:9103 Failed to connect to Storage daemon bacula. ==== You have messages. *messages 19-Apr 17:38 localhost-dir JobId 0: Fatal error: authenticate.c:120 Director unable to authenticate with Storage daemon at "127.0.0.1:9103". Possible causes: Passwords or names not the same or Maximum Concurrent Jobs exceeded on the SD or SD networking messed up (restart daemon). Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION003760000000000000000 for help. * bacula-sd.conf Storage { # definition of myself Name = bacula SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 } # # List Directors who are permitted to contact Storage daemon # Director { Name = bacula-dir Password = "helloworld" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = bacula-mon Password = "helloworld" Monitor = yes } Autochanger { Name = HP-Changer Device = LTO1-1 Device = LTO1-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg2 } Device { Name = LTO1-1 # Drive Index = 0 Media Type = LTO-1 Archive Device = /dev/st0 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RandomAccess = no; AutoChanger = yes # # # # Enable the Alert command only if you have the mtx package loaded # # Note, apparently on some systems, tapeinfo resets the SCSI controller # # thus if you turn this on, make sure it does not reset your SCSI # # controller. I have never had any problems, and smartctl does # # not seem to cause such problems. # # # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" # If you have smartctl, enable this, it has more info than tapeinfo # Alert Command = "sh -c 'smartctl -H -l error %c'" } Messages { Name = Standard director = bacula-dir = all } Bacula-dir.conf Director { # define myself Name = localhost-dir DIRport = 9101 QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = /var/lib/bacula PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 1 Password = "tralala" # Console password Messages = Daemon DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultJob" Type = Backup Level = Incremental Client = bacula-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = bacula Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultJob" } Storage { Name = bacula Address = 127.0.0.1 SDPort = 9103 Password = "KM0K1W1aF6w-G0NU181dVtedFUKDKn4QE" Device = HP-Changer Media Type = LTO-1 Autochanger = yes } Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver dbdriver = "dbi:mysql"; dbaddress = 127.0.0.1; dbport = 3306; dbname = "bacula" dbuser = "root" dbpassword = "alexwashere" } +---------------------------------------------------------------------- |This was sent by alexandertur...@me.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +---------------------------------------------------------------------- ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users