---------- Forwarded message ---------- From: Jesper Krogh <[email protected]> Date: Wed, Apr 25, 2012 at 2:29 PM Subject: Re: [Bacula-users] mtx and Overland Neo8000e To: John Drescher <[email protected]>
On 25/04/12 20:26, John Drescher wrote: >> >> But the time it takes for status/load/unload is about 2 minutes per action >> where 1 minute and 45 seconds goes by doing "nothing at all". >> > Are you sure the tape drive is not rewinding? 2 minutes sounds like a > reasonable time to unload a tape in an archive. This is about what I > see with my Exabyte Magnum 224. > Fairly sure, since it is the time to load that I've tried, I havent written a single byte on the tape yet. The strange thing is that from issuing the command and until the robot arm begins to move it takes approximately 60 seconds. Jesper -- John M. Drescher ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
