Dear John, In message <caehu1-44ehepjuzffxmr8vbqowrdbmkomswy7j-4s0xsgpv...@mail.gmail.com> you wrote: > > Yes. The robot works on all 3 devices.
I must be missing something very basic. I can address both drives in my autoloader directly. But when using the autoloader device, it always grabs device 0 only, like this: *mount The defined Storage resources are: 1: File 2: LTOLIB 3: LTO3-0 4: LTO3-1 5: ltos_temp 6: SLR100-0 7: SLR100-1 8: SLR100-2 9: DDS-3 Select Storage resource (1-9): 2 Connecting to Storage daemon LTOLIB at ltos.denx.de:9103 ... Enter autochanger drive[0]: 1 Enter autochanger slot: 25 3304 Issuing autochanger "load slot 25, drive 0" command. 3305 Autochanger "load slot 25, drive 0", status is OK. 3001 Mounted Volume: INC000L3 3001 Device ""LTO3-0" (/dev/tape/by-id/scsi-35000e11802947001-nst)" is mounted with Volume "INC000L3" I select drive 1, but the mount command operates on drive 0 instead. director - bacula-dir.conf : # Definition of LTO(3) autoloader Storage { Name = LTOLIB Address = xxx SDPort = 9103 Password = yyy Device = LTO3-0, LTO3-1 Media Type = LTO-3 Autochanger = yes Maximum Concurrent Jobs = 6 } # Definition of LTO(3) drive #0 in the autoloader Storage { Name = LTO3-0 Address = xxx SDPort = 9103 Password = yyy Device = LTO3-0 Media Type = LTO-3 Maximum Concurrent Jobs = 6 } # Definition of LTO(3) drive #1 in the autoloader Storage { Name = LTO3-1 Address = xxx SDPort = 9103 Password = yyy Device = LTO3-1 Media Type = LTO-3 Maximum Concurrent Jobs = 6 } Storage server xxx - bacula-sd.conf: Autochanger { Name = Autochanger Device = LTO3-0 Device = LTO3-1 Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_00DE64100465_LL0 } Device { Name = LTO3-0 Media Type = LTO-3 Drive Index = 0 Archive Device = /dev/tape/by-id/scsi-35000e11802947001-nst AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Maximum File Size = 5GB Maximum Block Size = 512K Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_00DE64100465_LL0 AutoChanger = yes # Enable the Alert command only if you have the mtx package loaded Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" # If you have smartctl, enable this, it has more info than tapeinfo # Alert Command = "sh -c 'smartctl -H -l error %c'" # Spool Data to disk before writing to tape Spool Directory = /backup/spool Maximum Spool Size = 5120GB Maximum Job Spool Size = 5120GB } Device { Name = LTO3-1 Media Type = LTO-3 Drive Index = 1 Archive Device = /dev/tape/by-id/scsi-35000e11802947004-nst AutomaticMount = yes; AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Maximum File Size = 5GB Maximum Block Size = 512K Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_00DE64100465_LL0 AutoChanger = yes # Enable the Alert command only if you have the mtx package loaded # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" # If you have smartctl, enable this, it has more info than tapeinfo Alert Command = "sh -c 'smartctl -H -l error %c'" # Spool Data to disk before writing to tape Spool Directory = /backup/spool Maximum Spool Size = 5120GB Maximum Job Spool Size = 5120GB } Any attempt to access storage "LTOLIB" will always go to drive 0 (aka "LTO3-0" = /dev/tape/by-id/scsi-35000e11802947001-nst) only. What am I missing? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de As a general rule, the freedom of any people can be judged by the volume of their laughter. ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users