On Tue, Dec 11, 2012 at 10:53:23AM +0000, deepak....@wipro.com wrote: > Hi guys, > > I am a new user of bacula. It was working fine previously but suddenly it > stopped working with tape drives. I am not sure why it happens it may be due > to some internal network changes in organization. > > Now... > > In Bconsole status storage command is showing below output. > > *status storage > Automatically selected Storage: Autochanger-TS3500-1 > Connecting to Storage daemon Autochanger-TS3500-1 at backup:9103 > > backup.pal.ac.in-sd Version: 5.0.3 (30 August 2010) x86_64-redhat-linux-gnu > redhat Enterprise release > Daemon started 31-Oct-12 18:25. Jobs: run=115, running=0. > Heap: heap=618,496 smbytes=505,289 max_bytes=603,996 bufs=152 max_bufs=161 > Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 > > Running Jobs: > Writing: Full Backup job BackupCatalog JobId=955 Volume="Catalog0016" > pool="Catalog" device="Drive-1" (/dev/nst0) > spooling=0 despooling=0 despool_wait=0 > Files=0 Bytes=0 Bytes/sec=0 > FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6 > ==== > > Jobs waiting to reserve a drive: > ==== > > Terminated Jobs: > JobId Level Files Bytes Status Finished Name > =================================================================== > 1053 Incr 0 0 OK 08-Dec-12 03:44 > dcc3a.pal.ac.in-backup > 1055 Incr 0 0 OK 08-Dec-12 03:44 > backup.pal.ac.in-backup > 1056 Incr 0 0 Cancel 08-Dec-12 03:46 > dcc2a.pal.ac.in-backup > 1057 Incr 0 0 OK 08-Dec-12 03:47 > dcc3a.pal.ac.in-backup > 1059 Incr 0 0 OK 08-Dec-12 03:47 > backup.pal.ac.in-backup > 1060 Incr 0 0 Cancel 08-Dec-12 03:48 > dcc2a.pal.ac.in-backup > 1061 Incr 0 0 OK 08-Dec-12 03:50 > dcc3a.pal.ac.in-backup > 1063 Incr 0 0 OK 08-Dec-12 03:50 > backup.pal.ac.in-backup > 1064 Incr 0 0 Cancel 08-Dec-12 03:51 > dcc2a.pal.ac.in-backup > 1065 Incr 0 0 OK 08-Dec-12 03:52 > dcc3a.pal.ac.in-backup > ==== > > Device status: > Autochanger "Autochanger-TS3500-1" with devices: > "Drive-1" (/dev/nst0) > "Drive-2" (/dev/nst1) > "Drive-3" (/dev/nst2) > "Drive-4" (/dev/nst3) > Device "Drive-1" (/dev/nst0) is not open. > Device is BLOCKED waiting for mount of volume "Catalog0016", > Pool: Catalog > Media type: ULT3580-TD4 > Drive 0 status unknown. > Device "Drive-2" (/dev/nst1) is not open. > Slot 15 is loaded in drive 1. > Device "Drive-3" (/dev/nst2) is mounted with: > Volume: A00055L4 > Pool: *unknown* > Media type: ULT3580-TD4 > Drive 2 status unknown. > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > Device "Drive-4" (/dev/nst3) is not open. > Drive 3 status unknown. > ==== > > Used Volume status: > A00055L4 on device "Drive-3" (/dev/nst2) > Reader=0 writers=0 devres=0 volinuse=0 > Catalog0016 on device "Drive-1" (/dev/nst0) > Reader=0 writers=0 devres=1 volinuse=0 > > > > And in logs its showing this. > > /var/lib/bacula/log > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: Invalid slot=0 defined in catalog > for Volume "Catalog0016" on "Drive-1" (/dev/nst0). Manual load may be > required.
The clue is above: Bacula doesn't know which autochanger slot to load the tape from. Did you change the volume's status recently (like setting it to "archive")? uwe > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: 3301 Issuing autochanger "loaded? > drive 0" command. > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: 3302 Autochanger "loaded? drive > 0", result: nothing loaded. > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: 3301 Issuing autochanger "loaded? > drive 0" command. > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: 3302 Autochanger "loaded? drive > 0", result: nothing loaded. > 11-Dec 15:56 backup.pal.ac.in-sd JobId 955: Warning: mount.c:217 Open device > "Drive-1" (/dev/nst0) Volume "Catalog0016" failed: ERR=dev.c:491 Unable to > open device "Drive-1" (/dev/nst0): ERR=No medium found > > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: Invalid slot=0 defined in catalog > for Volume "Catalog0016" on "Drive-1" (/dev/nst0). Manual load may be > required. > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: 3301 Issuing autochanger "loaded? > drive 0" command. > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: 3302 Autochanger "loaded? drive > 0", result: nothing loaded. > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: 3301 Issuing autochanger "loaded? > drive 0" command. > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: 3302 Autochanger "loaded? drive > 0", result: nothing loaded. > 11-Dec 16:01 backup.pal.ac.in-sd JobId 955: Warning: mount.c:217 Open device > "Drive-1" (/dev/nst0) Volume "Catalog0016" failed: ERR=dev.c:491 Un > > > I will be thankful if someone will help me out in figuring out this issue. > > > Thanks in advance, > > Deepak > ------------------------------------------------------------------------------ > LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial > Remotely access PCs and mobile devices and provide instant support > Improve your efficiency, and focus on delivering more value-add services > Discover what IT Professionals Know. Rescue delivers > http://p.sf.net/sfu/logmein_12329d2d > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -- NIONEX --- Ein Unternehmen der Bertelsmann SE & Co. KGaA ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
