On 2013-02-06 10:46, Jummo wrote: > On Wed, 6 Feb 2013, Jean-Louis Dupond wrote: > >> Hi, >> >> Thanks for the answer. >> But what about this then: >> If you then want to do subsequent backups, you may need to move the >> Virtual Full Volume back to your normal backup pool. Alternatively, >> you can set your Next Pool to point to the current pool. This will >> cause Bacula to read and write to Volumes in the current pool. >> >> So what would be the correct way to create VirtualFull's then? >> > > You need two devices for your Storage, so Bacula can read from one > volume loaded in one device and write simultaneously to an another > volume in the same pool loaded in a second device. For Backup2Disk a > Virtual > Tape Library could be a solution.
How can a Pool be defined with 2 Storage devices? The Pool defines: Storage = ApolloFile But you can't define 2 devices for 1 storage? Any change to get an example? Cause the Virtual Full documentation is not always as clear. > > Best Regards, > Patrick ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
