On 01/04/14 19:39, Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] wrote: > How is the library connected to the bacula server? > -- The Tape Library is connected to the server through fiber.
How many fibre ports do you have on the server? If more than one, are they both connected to the switch? > What's the exact error message you get? > -- I get Media Error when this happens. > > What shows on the library front panel? > -- "Media attention!" This could be a drive wanting cleaning. What does the manual say? If you can see the drive itself, are any leds showing? > > Thanks, > Uthra > > > -----Original Message----- > From: Alan Brown [mailto:a...@mssl.ucl.ac.uk] > Sent: Tuesday, April 01, 2014 2:17 PM > To: Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC]; > bacula-users@lists.sourceforge.net > Subject: Re: [Bacula-users] Maximum Changer Wait directive > > On 01/04/14 18:23, Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] wrote: >> I am running bacula 5.2.12 on RHEL6 O.S. with IBM TS3200 Tape Library >> with two LTO5 drives. Sometimes the autochanger is unable to mount a >> required tape as the tape gets stuck in its slot and needs manual >> intervension. > > "stuck" can mean many things. > > How is the library connected to the bacula server? > > What's the exact error message you get? > What shows on the library front panel? > > > > > > > ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
