Hi, I try to use copy-jobs with an neo200s (2 drives,with logical partition: 2 jukeboxes with one drive each). Bacula is version 5.2.10. If I run an copyjob with 4.8 TB the job fails during volume-change on the normal (source) backup-jukebox. Both jobs failed at the same time (2:00):
########### copy-job ########### 29-Jul 11:37 backup-srv-dir JobId 2475: The following 1 JobId was chosen to be copied: 2452 29-Jul 11:37 backup-srv-dir JobId 2475: Copying using JobId=2452 Job=fileserver.2014-07-26_21.35.00_43 29-Jul 11:37 backup-srv-dir JobId 2475: Bootstrap records written to /var/bacula/working/backup-srv-dir.restore.3.bsr 29-Jul 11:37 backup-srv-dir JobId 2475: Start Copying JobId 2475, Job=Copy-To-Offsite.2014-07-29_11.37.21_38 29-Jul 11:37 backup-srv-dir JobId 2475: Using Device "LTO6-Drive-2" 29-Jul 11:37 backup-srv-sd JobId 2475: 3307 Issuing autochanger "unload slot 12, drive 0" command. 29-Jul 11:38 backup-srv-sd JobId 2475: 3304 Issuing autochanger "load slot 2, drive 0" command. 29-Jul 11:39 backup-srv-sd JobId 2475: 3305 Autochanger "load slot 2, drive 0", status is OK. 29-Jul 11:39 backup-srv-sd JobId 2475: Ready to read from volume "BM0014L6" on device "LTO6-Drive-1" (/dev/nst0). 29-Jul 11:39 backup-srv-sd JobId 2475: 3307 Issuing autochanger "unload slot 2, drive 0" command. 29-Jul 11:40 backup-srv-sd JobId 2475: 3304 Issuing autochanger "load slot 3, drive 0" command. 29-Jul 11:41 backup-srv-sd JobId 2475: 3305 Autochanger "load slot 3, drive 0", status is OK. 29-Jul 11:41 backup-srv-sd JobId 2475: Wrote label to prelabeled Volume "BK0008L6" on device "LTO6-Drive-2" (/dev/nst1) 29-Jul 11:41 backup-srv-sd JobId 2475: Forward spacing Volume "BM0014L6" to file:block 79:1. 30-Jul 01:55 backup-srv-sd JobId 2475: End of Volume at file 530 on device "LTO6-Drive-1" (/dev/nst0), Volume "BM0014L6" 30-Jul 01:55 backup-srv-sd JobId 2475: 3307 Issuing autochanger "unload slot 2, drive 0" command. 30-Jul 01:58 backup-srv-sd JobId 2475: 3304 Issuing autochanger "load slot 6, drive 0" command. 30-Jul 01:58 backup-srv-sd JobId 2475: 3305 Autochanger "load slot 6, drive 0", status is OK. 30-Jul 01:58 backup-srv-sd JobId 2475: Ready to read from volume "BM0019L6" on device "LTO6-Drive-1" (/dev/nst0). 30-Jul 01:58 backup-srv-sd JobId 2475: Forward spacing Volume "BM0019L6" to file:block 0:1. 30-Jul 02:00 backup-srv-sd JobId 2475: Error: block.c:1001 Read error on fd=4 at file:blk 2:0 on device "LTO6-Drive-1" (/dev/nst0). ERR=Input/output error. 30-Jul 02:00 backup-srv-sd JobId 2475: End of Volume at file 2 on device "LTO6-Drive-1" (/dev/nst0), Volume "BM0019L6" 30-Jul 02:00 backup-srv-sd JobId 2475: Fatal error: acquire.c:71 Acquire read: num_writers=1 not zero. Job 2475 canceled. 30-Jul 02:00 backup-srv-sd JobId 2475: Fatal error: mount.c:865 Cannot open Dev="LTO6-Drive-1" (/dev/nst0), Vol=BM0019L6 30-Jul 02:00 backup-srv-sd JobId 2475: End of all volumes. 30-Jul 02:00 backup-srv-sd JobId 2475: Fatal error: mac.c:127 Fatal append error on device "LTO6-Drive-2" (/dev/nst1): ERR=block.c:1001 Read error on fd=6 at file:blk 0:0 on device "LTO6-Drive-2" (/dev/nst1). ERR=Input/output error. ########### normal-job ########### 29-Jul 21:35 backup-srv-dir JobId 2477: Start Backup JobId 2477, Job=backup-srv.2014-07-29_21.35.00_40 30-Jul 01:56 backup-srv-dir JobId 2477: Using Device "LTO6-Drive-1" 30-Jul 01:58 backup-srv-sd JobId 2477: 3307 Issuing autochanger "unload slot 6, drive 0" command. 30-Jul 01:59 backup-srv-sd JobId 2477: 3304 Issuing autochanger "load slot 12, drive 0" command. 30-Jul 02:00 backup-srv-sd JobId 2477: 3305 Autochanger "load slot 12, drive 0", status is OK. 30-Jul 02:00 backup-srv-sd JobId 2477: Volume "BM0021L6" previously written, moving to end of data. 30-Jul 02:00 backup-srv-sd JobId 2477: Ready to append to end of Volume "BM0021L6" at file=2. 30-Jul 02:00 backup-srv-sd JobId 2477: Spooling data ... 30-Jul 02:00 backup-srv-sd JobId 2477: Job write elapsed time = 00:00:01, Transfer rate = 0 Bytes/second 30-Jul 02:00 backup-srv-sd JobId 2477: Committing spooled data to Volume "BM0021L6". Despooling 452 bytes ... 30-Jul 02:00 backup-srv-sd JobId 2477: Fatal error: block.c:439 Attempt to write on read-only Volume. dev="LTO6-Drive-1" (/dev/nst0) 30-Jul 02:00 backup-srv-sd JobId 2477: Fatal error: spool.c:301 Fatal append error on device "LTO6-Drive-1" (/dev/nst0): ERR=block.c:1001 Read error on fd=4 at file:blk 2:0 on device "LTO6-Drive-1" (/dev/nst0). ERR=Input/output error. The drive has "Maximum Concurrent Jobs = 15" because of multible backup jobs (sequential due spool = yes). If I must change the Concurrent Jobs to 1, I guess I run in trouble during normal backup (backup-window). But why don't prevent the copy-job to using the source-jukebox for other jobs?? Any hints?? Regards Udo ------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
