>
> I tried running "label barcodes", but it errors out saying that the tapes
> are already labeled, which is why I ran the "add pool=Default
> storage=ML6000-LTO3-0". I assumed it would read the labels already on the
> tapes, but instead ran me through the dialog I posted earlier.
>
Hey Mr. Russ: this will not do the trick. The add command does not sync the
real tape information with the catalog information.
You gotta use the bscan on the tapes (-s -m) to do that, instead. You
probably will have to load tapes one by one, with the mtx command (bash).
> I'm totally OK with going back to zero on this, whatever that is, but if
> the tapes are already labeled, "label barcodes" doesn't get it done.
>
You could also erase the tapes one by one, with the: mt -f /dev/st0 weof
(e.g.) command.
Regards and good luck.
--
============================================
Heitor Medrado de Faria
Need Bacula training? 10% discount coupon code at Udemy: bacula-users
<https://www.udemy.com/bacula-backup-software/?couponCode=bacula-users>
+55 61 2021-8260
+55 61 8268-4220
Site: www.bacula.com.br
Facebook: heitor.faria <http://www.facebook.com/heitor.faria>
Gtalk: heitorfa...@gmail.com
============================================
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
