cat /proc/scsi/scsi: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: SEAGATE Model: ST373455SS Rev: S52C Type: Direct-Access ANSI SCSI revision: 05 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SEAGATE Model: ST373455SS Rev: S52C Type: Direct-Access ANSI SCSI revision: 05 Host: scsi0 Channel: 01 Id: 00 Lun: 00 Vendor: Dell Model: VIRTUAL DISK Rev: 1028 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 02 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 03 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 31 Vendor: DELL Model: Universal Xport Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 01 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 02 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 03 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 31 Vendor: DELL Model: Universal Xport Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 04 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 05 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 04 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 05 Vendor: DELL Model: MD32xx Rev: 0784 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 08 Lun: 00 Vendor: IBM Model: ULT3580-HH6 Rev: D8E5 Type: Sequential-Access ANSI SCSI revision: 06 Host: scsi2 Channel: 00 Id: 10 Lun: 00 Vendor: IBM Model: ULT3580-HH6 Rev: D8E5 Type: Sequential-Access ANSI SCSI revision: 06 Host: scsi2 Channel: 00 Id: 10 Lun: 01 Vendor: IBM Model: 3573-TL Rev: C.30 Type: Medium Changer ANSI SCSI revision: 05
sg_map -x /dev/sg0 0 0 0 0 0 /dev/sg1 0 0 1 0 0 /dev/sg2 0 1 0 0 0 /dev/sda /dev/sg3 1 0 0 0 0 /dev/sdb /dev/sg4 1 0 0 1 0 /dev/sdc /dev/sg5 1 0 0 2 0 /dev/sdd /dev/sg6 1 0 0 3 0 /dev/sde /dev/sg7 1 0 0 31 0 /dev/sdf /dev/sg8 1 0 1 0 0 /dev/sdg /dev/sg9 1 0 1 1 0 /dev/sdh /dev/sg10 1 0 1 2 0 /dev/sdi /dev/sg11 1 0 1 3 0 /dev/sdj /dev/sg12 1 0 1 31 0 /dev/sdk /dev/sg13 1 0 0 4 0 /dev/sdl /dev/sg14 1 0 0 5 0 /dev/sdm /dev/sg15 1 0 1 4 0 /dev/sdn /dev/sg16 1 0 1 5 0 /dev/sdo /dev/sg17 2 0 8 0 1 /dev/nst0 /dev/sg18 2 0 10 0 1 /dev/nst1 /dev/sg19 2 0 10 1 8 As an example of the status of things, here's the output of: mtx-changer /dev/changer listall 0 /dev/nst0 0 D:0:F:44:000002L6 D:1:E S:1:F:000045L6 S:2:F:000001L6 S:3:F:000046L6 S:4:F:000042L6 S:5:F:000043L6 S:6:F:000044L6 S:7:F:000038L6 S:8:F:000039L6 S:9:F:000040L6 S:10:F:000033L6 S:11:F:000034L6 S:12:F:000035L6 S:13:F:000036L6 S:14:F:000029L6 S:15:F:000030L6 S:16:F:000031L6 S:17:F:000032L6 S:18:F:000025L6 S:19:F:000026L6 S:20:F:000027L6 S:21:F:000028L6 S:22:F:000024L6 S:23:F:000023L6 S:24:F:000022L6 S:25:F:000021L6 S:26:F:000020L6 S:27:F:000019L6 S:28:F:000018L6 S:29:F:000017L6 S:30:F:000016L6 S:31:F:000015L6 S:32:F:000014L6 S:33:F:000013L6 S:34:F:000012L6 S:35:F:000011L6 S:36:F:000010L6 S:37:F:000009L6 S:38:F:000008L6 S:39:F:000007L6 S:40:F:000006L6 S:41:F:000005L6 S:42:F:000004L6 S:43:F:000003L6 S:44:E I:45:F:000047L6 I:46:F:000041L6 I:47:F:000037L6 so you can see that drive 0 has the tape from slot 44 in it, and drive 1 is empty. 44 is the last slot that the "label barcode" seems to know about... the "I" slots seem to be invisible to a normal "list" command. So that was a tape loaded yesterday when I attempted to do a "label barcode" with the 900 sec timeouts. I have not attempted to do a load or unload for 24 hours. Here are the current mt status results from these drives: mt -f /dev/nst0 status SCSI 2 tape drive: File number=-1, block number=-1, partition=0. Tape block size 0 bytes. Density code 0x0 (default). Soft error count since last status=0 General status bits on (50000): DR_OPEN IM_REP_EN mt -f /dev/nst1 status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x5a (no translation). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN So after having the tape in the drive for more then 24 hours, the state is still DR_OPEN on drive 0, which since the $ready variable is ONLINE, will prevent mtx-changer from ever returning before it times out. On Thu, Jun 18, 2015 at 8:45 PM, Ana Emília M. Arruda <emiliaarr...@gmail.com> wrote: > Hi Andrew, > > Also, can you send us "cat /proc/scsi/scis" and "sg_map -x"? > > Best regards, > Ana > > On Thu, Jun 18, 2015 at 9:17 AM, Josh Fisher <jfis...@pvct.com> wrote: >> >> >> >> On 6/17/2015 10:35 PM, Andrew Noonan wrote: >> > @Marcin - dmesg is clean >> > >> > @Ana - I ~think~ /dev/changer is created by udev, I'm not 100%. It's >> > a symlink to sg19 in this case: >> >> Most likely, udev got it right. Try mtx -f /dev/changer noattach status. >> If that works, then try the load with the 'noattach' prefix. This drive >> could be reporting it supports the _ATTACHED API, but does not exactly >> comply/match with the expected API commands. The noattach prefix will >> force mtx to use the regular media changer API. >> >> >> >> > >> > lrwxrwxrwx 1 root root 4 Jun 10 17:06 /dev/changer -> sg19 >> > crw-rw---- 1 root disk 21, 19 Jun 10 17:06 /dev/sg19 >> > >> > Here are the tape drive parts of "lsscsi -l". I removed a bunch of >> > HDDs attached to the system: >> > >> > [2:0:8:0] tape IBM ULT3580-HH6 D8E5 /dev/st0 >> > state=running queue_depth=254 scsi_level=7 type=1 device_blocked=0 >> > timeout=900 >> > [2:0:10:0] tape IBM ULT3580-HH6 D8E5 /dev/st1 >> > state=running queue_depth=254 scsi_level=7 type=1 device_blocked=0 >> > timeout=900 >> > [2:0:10:1] mediumx IBM 3573-TL C.30 - >> > state=running queue_depth=254 scsi_level=6 type=8 device_blocked=0 >> > timeout=0 >> > >> > At some point we had the Tape unit powered down and then powered it >> > back up, but the system remained on, so the dmesg mentions the drives >> > multiple times: >> > >> > [anoonan@odin ~]$ dmesg | grep Attached >> > sd 0:1:0:0: Attached scsi disk sda >> > scsi 0:0:0:0: Attached scsi generic sg0 type 0 >> > scsi 0:0:1:0: Attached scsi generic sg1 type 0 >> > sd 0:1:0:0: Attached scsi generic sg2 type 0 >> > sd 1:0:0:0: Attached scsi disk sdb >> > sd 1:0:0:0: Attached scsi generic sg3 type 0 >> > sd 1:0:0:1: Attached scsi disk sdc >> > sd 1:0:0:1: Attached scsi generic sg4 type 0 >> > sd 1:0:0:2: Attached scsi disk sdd >> > sd 1:0:0:2: Attached scsi generic sg5 type 0 >> > sd 1:0:0:3: Attached scsi disk sde >> > sd 1:0:0:3: Attached scsi generic sg6 type 0 >> > sd 1:0:0:31: Attached scsi disk sdf >> > sd 1:0:0:31: Attached scsi generic sg7 type 0 >> > sd 1:0:1:0: Attached scsi disk sdg >> > sd 1:0:1:0: Attached scsi generic sg8 type 0 >> > sd 1:0:1:1: Attached scsi disk sdh >> > sd 1:0:1:1: Attached scsi generic sg9 type 0 >> > sd 1:0:1:2: Attached scsi disk sdi >> > sd 1:0:1:2: Attached scsi generic sg10 type 0 >> > sd 1:0:1:3: Attached scsi disk sdj >> > sd 1:0:1:3: Attached scsi generic sg11 type 0 >> > sd 1:0:1:31: Attached scsi disk sdk >> > sd 1:0:1:31: Attached scsi generic sg12 type 0 >> > scsi 2:0:0:0: Attached scsi generic sg13 type 1 >> > scsi 2:0:1:0: Attached scsi generic sg14 type 1 >> > st 2:0:0:0: Attached scsi tape st0 >> > st 2:0:1:0: Attached scsi tape st1 >> > st 2:0:2:0: Attached scsi tape st1 >> > st 2:0:2:0: Attached scsi generic sg14 type 1 >> > st 2:0:3:0: Attached scsi tape st1 >> > st 2:0:3:0: Attached scsi generic sg14 type 1 >> > st 2:0:4:0: Attached scsi tape st0 >> > st 2:0:4:0: Attached scsi generic sg13 type 1 >> > st 2:0:5:0: Attached scsi tape st1 >> > st 2:0:5:0: Attached scsi generic sg14 type 1 >> > scsi 2:0:5:1: Attached scsi generic sg15 type 8 >> > st 2:0:6:0: Attached scsi tape st0 >> > st 2:0:6:0: Attached scsi generic sg13 type 1 >> > scsi 2:0:6:1: Attached scsi generic sg14 type 8 >> > st 2:0:7:0: Attached scsi tape st1 >> > st 2:0:7:0: Attached scsi generic sg15 type 1 >> > sd 1:0:0:4: Attached scsi disk sdl >> > sd 1:0:0:4: Attached scsi generic sg13 type 0 >> > sd 1:0:0:5: Attached scsi disk sdm >> > sd 1:0:0:5: Attached scsi generic sg14 type 0 >> > sd 1:0:1:4: Attached scsi disk sdn >> > sd 1:0:1:4: Attached scsi generic sg15 type 0 >> > sd 1:0:1:5: Attached scsi disk sdo >> > sd 1:0:1:5: Attached scsi generic sg16 type 0 >> > st 2:0:8:0: Attached scsi tape st0 >> > st 2:0:8:0: Attached scsi generic sg17 type 1 >> > st 2:0:9:0: Attached scsi tape st1 >> > st 2:0:9:0: Attached scsi generic sg18 type 1 >> > scsi 2:0:9:1: Attached scsi generic sg19 type 8 >> > st 2:0:10:0: Attached scsi tape st1 >> > st 2:0:10:0: Attached scsi generic sg18 type 1 >> > scsi 2:0:10:1: Attached scsi generic sg19 type 8 >> > >> > I did change out the device names for the drives to be /dev/tape/by-id >> > names instead to make sure the naming stays stable after reboots, but >> > I haven't tried changing /dev/changer to anything else. The btape >> > tests were successful, and I haven't had any problems with mtx or even >> > mt commands, though as mentioned previously, I've gotten Input/Output >> > errors from mt when doing rewind/weof commands to the drives. That >> > being said, I'm suspicious of the amount of time that mt reports >> > DR_OPEN on loads. I can issue mtx-changer commands OK, as well, >> > though I'm not sure if the "load" command is actually returning >> > correctly, or is just timing out internally. unloads/list/listall >> > from mtx-changer have always returned successfully. >> > >> > This is a Centos 5 machine, so not very new at all. mtx package is: >> > mtx-1.2.18-9, mt-st is mt-st-0.9b-4.el5 >> > >> > It may be a little challenge to upgrade this system (probably to >> > Centos 6), but not impossible if it needs to happen. >> > >> > Thanks, >> > Andrew >> > >> > On Wed, Jun 17, 2015 at 8:32 PM, Ana Emília M. Arruda >> > <emiliaarr...@gmail.com> wrote: >> >> Hello Andrew, >> >> >> >> Is /dev/changer created by udev rules? Have you tried /dev/sgX instead? >> >> Can >> >> you send us the output of the "lsscsi -l" command and "dmesg | grep >> >> Attached"? Have you checked your drives/autochanger using just mtx/mt >> >> commands to see if they are working? Which is your mtx version? >> >> >> >> Best regards, >> >> Ana >> >> >> >> On Wed, Jun 17, 2015 at 7:29 PM, Marcin Haba <ganius...@gmail.com> >> >> wrote: >> >>> Hello, >> >>> >> >>> Do you have any errors in dmesg (hardware errors, bus reset, SCSI >> >>> errors ... etc.) ? >> >>> >> >>> Best regards, >> >>> Marcin Haba (gani) >> >>> >> >>> 2015-06-17 21:56 GMT+02:00 Andrew Noonan <anoo...@gmail.com>: >> >>>> Hi all, >> >>>> >> >>>> It's taking a lot longer because of the higher timeouts, but >> >>>> the >> >>>> label is still failing with a termination. If I understand it >> >>>> correctly, the mtx-changer script is polling with 'mt' looking for >> >>>> the >> >>>> $ready state, defined in the config file as ONLINE (for Linux). I'm >> >>>> not seeing drive 0 go into that state... I just see: >> >>>> >> >>>> SCSI 2 tape drive: >> >>>> File number=-1, block number=-1, partition=0. >> >>>> Tape block size 0 bytes. Density code 0x0 (default). >> >>>> Soft error count since last status=0 >> >>>> General status bits on (50000): >> >>>> DR_OPEN IM_REP_EN >> >>>> >> >>>> the other device looks like: >> >>>> >> >>>> SCSI 2 tape drive: >> >>>> File number=0, block number=0, partition=0. >> >>>> Tape block size 0 bytes. Density code 0x5a (no translation). >> >>>> Soft error count since last status=0 >> >>>> General status bits on (41010000): >> >>>> BOT ONLINE IM_REP_EN >> >>>> >> >>>> So I see that it's ~possible~ to see the ONLINE state, but it doesn't >> >>>> seem like it ever gets to that state during load. >> >>>> >> >>>> Any thoughts? >> >>>> >> >>>> Thanks, >> >>>> Andrew >> >>>> >> >>>> On Wed, Jun 17, 2015 at 11:44 AM, Andrew Noonan <anoo...@gmail.com> >> >>>> wrote: >> >>>>> Hi Ana, >> >>>>> >> >>>>> Thanks for the reply. I'm adding those into the drives. BTW, >> >>>>> 900 is the value. Having no real experience with these, is it >> >>>>> abnormal for a load to take the 10+ minutes, or is that reasonable? >> >>>>> My next step is to add those settings in, restart the SD, and >> >>>>> attempt >> >>>>> to do a "label barcode" again. >> >>>>> >> >>>>> Thanks, >> >>>>> Andrew >> >>>>> >> >>>>> On Tue, Jun 16, 2015 at 9:10 PM, Ana Emília M. Arruda >> >>>>> <emiliaarr...@gmail.com> wrote: >> >>>>>> Hello Andrew, >> >>>>>> >> >>>>>> You can find in the output of a "lsscsi -l" command the timeout for >> >>>>>> your >> >>>>>> drives. Then you can configure 3 timeout directives for each one of >> >>>>>> your two >> >>>>>> drives (LRADrive-1 e LRADrive-2): >> >>>>>> >> >>>>>> Maximum Changer Wait = X >> >>>>>> Maximum Rewind Wait = X >> >>>>>> Maximum Open Wait = X >> >>>>>> >> >>>>>> where X is the timeout value for your dirves. >> >>>>>> >> >>>>>> You can also customize your mtx-changer script for this timeout >> >>>>>> changing the >> >>>>>> bellow 300 seconds value: >> >>>>>> >> >>>>>> wait_for_drive() { >> >>>>>> i=0 >> >>>>>> while [ $i -le 300 ]; do # Wait max 300 seconds >> >>>>>> >> >>>>>> Best regards, >> >>>>>> Ana >> >>>>>> >> >>>>>> >> >>>>>> On Tue, Jun 16, 2015 at 5:02 PM, Andrew Noonan <anoo...@gmail.com> >> >>>>>> wrote: >> >>>>>>> Hi all, >> >>>>>>> >> >>>>>>> I'm almost completely new to tape. We've been doing disk-based >> >>>>>>> backups for years, but we now have a project where we want to >> >>>>>>> offsite >> >>>>>>> hundreds of TB permanently, and have a Dell TL4000 (a rebranded >> >>>>>>> IBM >> >>>>>>> 3573-TL from the looks of it) with 2 ULT3580 LTO-6 drives. We're >> >>>>>>> running bacula 5.2. The server is a Dell 1950 running Centos 5 >> >>>>>>> (sorry >> >>>>>>> for the old OS). >> >>>>>>> >> >>>>>>> The btape tests run on both units without a problem, including the >> >>>>>>> autochanger tests, and manually executing load/unload/list >> >>>>>>> commands >> >>>>>>> with mtx-changer seem to run fine. The one exception to this is >> >>>>>>> that >> >>>>>>> the mtx-changer load command seems to take about 10 minutes to >> >>>>>>> complete, which seems unreasonably long. These are brand new >> >>>>>>> tapes >> >>>>>>> and I haven't written anything to them other then whatever btape >> >>>>>>> does >> >>>>>>> with testing. I put a 5 minute sleep on the load for mtx-changer, >> >>>>>>> but >> >>>>>>> other then that haven't customized the script, as I'm not sure >> >>>>>>> what >> >>>>>>> I'd customize. >> >>>>>>> >> >>>>>>> The "update slots" command from the director works OK, but when I >> >>>>>>> go >> >>>>>>> to do a "label barcode", the resulting "load slot" gets killed by >> >>>>>>> Bacula: >> >>>>>>> >> >>>>>>> 3992 Bad autochanger "load slot 20, drive 1": ERR=Child died from >> >>>>>>> signal 15: Termination. >> >>>>>>> Results=Program killed by Bacula (timeout) >> >>>>>>> >> >>>>>>> I've seen that in some of these posts to the list, this ends up >> >>>>>>> being >> >>>>>>> permissions problems against the devices, but that doesn't seem to >> >>>>>>> be >> >>>>>>> the case as far as I can see: >> >>>>>>> >> >>>>>>> bacula-sd is running as the bacula user/group. The bacula user is >> >>>>>>> in >> >>>>>>> the "disk" group, and the *st* devices are in the disk group with >> >>>>>>> "rw" >> >>>>>>> permissions: >> >>>>>>> >> >>>>>>> crw-rw---- 1 root disk 9, 128 Jun 4 12:02 /dev/nst0 >> >>>>>>> crw-rw---- 1 root disk 9, 224 Jun 4 12:02 /dev/nst0a >> >>>>>>> crw-rw---- 1 root disk 9, 160 Jun 4 12:02 /dev/nst0l >> >>>>>>> crw-rw---- 1 root disk 9, 192 Jun 4 12:02 /dev/nst0m >> >>>>>>> crw-rw---- 1 root disk 9, 129 Jun 10 17:06 /dev/nst1 >> >>>>>>> crw-rw---- 1 root disk 9, 225 Jun 10 17:06 /dev/nst1a >> >>>>>>> crw-rw---- 1 root disk 9, 161 Jun 10 17:06 /dev/nst1l >> >>>>>>> crw-rw---- 1 root disk 9, 193 Jun 10 17:06 /dev/nst1m >> >>>>>>> crw-rw---- 1 root disk 9, 0 Jun 4 12:02 /dev/st0 >> >>>>>>> crw-rw---- 1 root disk 9, 96 Jun 4 12:02 /dev/st0a >> >>>>>>> crw-rw---- 1 root disk 9, 32 Jun 4 12:02 /dev/st0l >> >>>>>>> crw-rw---- 1 root disk 9, 64 Jun 4 12:02 /dev/st0m >> >>>>>>> crw-rw---- 1 root disk 9, 1 Jun 10 17:06 /dev/st1 >> >>>>>>> crw-rw---- 1 root disk 9, 97 Jun 10 17:06 /dev/st1a >> >>>>>>> crw-rw---- 1 root disk 9, 33 Jun 10 17:06 /dev/st1l >> >>>>>>> crw-rw---- 1 root disk 9, 65 Jun 10 17:06 /dev/st1m >> >>>>>>> >> >>>>>>> Here's a block of debug from the SD during a label attempt for one >> >>>>>>> of >> >>>>>>> the >> >>>>>>> slots: >> >>>>>>> >> >>>>>>> odin-sd: autochanger.c:434-0 Wiffle through devices looking for >> >>>>>>> slot >> >>>>>>> odin-sd: autochanger.c:313-0 Locking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:740-0 omsg=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst0 0 >> >>>>>>> odin-sd: autochanger.c:272-0 Run >> >>>>>>> program=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst0 0 >> >>>>>>> odin-sd: watchdog.c:206-0 Registered watchdog 636b888, interval >> >>>>>>> 300 >> >>>>>>> odin-sd: bpipe.c:220-0 Wait for 28962 opt=1 >> >>>>>>> odin-sd: bpipe.c:228-0 Got break wpid=28962 status=0 ERR=none >> >>>>>>> odin-sd: bpipe.c:249-0 child status=0 >> >>>>>>> odin-sd: watchdog.c:226-0 Unregistered watchdog 636b888 >> >>>>>>> odin-sd: bpipe.c:264-0 returning stat=0,0 >> >>>>>>> odin-sd: autochanger.c:274-0 run_prog: >> >>>>>>> /usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst0 0 stat=0 result=0 >> >>>>>>> odin-sd: autochanger.c:327-0 Unlocking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:313-0 Locking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:740-0 omsg=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst1 1 >> >>>>>>> odin-sd: autochanger.c:272-0 Run >> >>>>>>> program=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst1 1 >> >>>>>>> odin-sd: watchdog.c:206-0 Registered watchdog 636b888, interval >> >>>>>>> 300 >> >>>>>>> odin-sd: bpipe.c:220-0 Wait for 28976 opt=1 >> >>>>>>> odin-sd: bpipe.c:228-0 Got break wpid=28976 status=0 ERR=none >> >>>>>>> odin-sd: bpipe.c:249-0 child status=0 >> >>>>>>> odin-sd: watchdog.c:226-0 Unregistered watchdog 636b888 >> >>>>>>> odin-sd: bpipe.c:264-0 returning stat=0,0 >> >>>>>>> odin-sd: autochanger.c:274-0 run_prog: >> >>>>>>> /usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer loaded 14 /dev/nst1 1 stat=0 result=0 >> >>>>>>> odin-sd: autochanger.c:327-0 Unlocking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:453-0 Slot=14 not found in another device >> >>>>>>> odin-sd: autochanger.c:313-0 Locking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:183-0 Doing changer load slot 14 >> >>>>>>> "LRADrive-2" >> >>>>>>> (/dev/nst1) >> >>>>>>> odin-sd: autochanger.c:740-0 omsg=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer load 14 /dev/nst1 1 >> >>>>>>> odin-sd: dev.c:1746-0 close_dev "LRADrive-2" (/dev/nst1) >> >>>>>>> odin-sd: dev.c:1751-0 device "LRADrive-2" (/dev/nst1) already >> >>>>>>> closed >> >>>>>>> vol= >> >>>>>>> odin-sd: autochanger.c:190-0 Run >> >>>>>>> program=/usr/lib64/bacula/mtx-changer >> >>>>>>> /dev/changer load 14 /dev/nst1 1 >> >>>>>>> odin-sd: watchdog.c:206-0 Registered watchdog 636b888, interval >> >>>>>>> 300 >> >>>>>>> odin-sd: bpipe.c:443-0 Run program fgets killed=1 >> >>>>>>> odin-sd: bpipe.c:220-0 Wait for 28990 opt=1 >> >>>>>>> odin-sd: bpipe.c:228-0 Got break wpid=28990 status=15 ERR=none >> >>>>>>> odin-sd: bpipe.c:256-0 Child died from signal 15 >> >>>>>>> odin-sd: watchdog.c:235-0 Unregistered inactive watchdog 636b888 >> >>>>>>> odin-sd: bpipe.c:264-0 returning stat=15,134217743 >> >>>>>>> odin-sd: autochanger.c:205-0 load slot 14, drive 1, bad >> >>>>>>> stats=Child >> >>>>>>> died from signal 15: Termination. >> >>>>>>> odin-sd: autochanger.c:212-0 load slot 14 status=134217743 >> >>>>>>> odin-sd: autochanger.c:327-0 Unlocking changer LogRepoAutochanger >> >>>>>>> odin-sd: autochanger.c:218-0 After changer, status=134217743 >> >>>>>>> odin-sd: dev.c:1735-0 Clear volhdr vol= >> >>>>>>> odin-sd: vol_mgr.c:544-0 vol_unused: no vol on "LRADrive-2" >> >>>>>>> (/dev/nst1) >> >>>>>>> odin-sd: lock.c:302-0 return lock. old=BST_WRITING_LABEL from >> >>>>>>> dircmd.c:554 >> >>>>>>> odin-sd: lock.c:307-0 return lock. new=BST_NOT_BLOCKED >> >>>>>>> odin-sd: dev.c:1746-0 close_dev "LRADrive-2" (/dev/nst1) >> >>>>>>> odin-sd: dev.c:1751-0 device "LRADrive-2" (/dev/nst1) already >> >>>>>>> closed >> >>>>>>> vol= >> >>>>>>> odin-sd: acquire.c:731-0 Enter detach_dcr_from_dev >> >>>>>>> odin-sd: dircmd.c:220-0 <dird: label LogRepoAutochanger >> >>>>>>> VolumeName=000030L6 PoolName=LogrepoArchive MediaType=LTO-6 >> >>>>>>> Slot=15 >> >>>>>>> drive=1 >> >>>>>>> odin-sd: dircmd.c:234-0 Do command: label >> >>>>>>> odin-sd: dircmd.c:627-0 Try changer device LRADrive-1 >> >>>>>>> odin-sd: dircmd.c:648-0 Device LogRepoAutochanger drive wrong: >> >>>>>>> want=1 >> >>>>>>> got=0 skipping >> >>>>>>> odin-sd: dircmd.c:627-0 Try changer device LRADrive-2 >> >>>>>>> odin-sd: dircmd.c:643-0 Found changer device LRADrive-2 >> >>>>>>> odin-sd: dircmd.c:656-0 Found device LRADrive-2 >> >>>>>>> odin-sd: block.c:144-0 Returning new block=636b800 >> >>>>>>> odin-sd: acquire.c:713-0 JobId=0 enter attach_dcr_to_dev >> >>>>>>> odin-sd: dircmd.c:421-0 Can label. Device is not open >> >>>>>>> odin-sd: lock.c:285-0 steal lock. old=BST_NOT_BLOCKED from >> >>>>>>> dircmd.c:470 >> >>>>>>> odin-sd: lock.c:290-0 steal lock. new=BST_WRITING_LABEL >> >>>>>>> odin-sd: dircmd.c:471-0 Stole device "LRADrive-2" (/dev/nst1) >> >>>>>>> lock, >> >>>>>>> writing label. >> >>>>>>> >> >>>>>>> The config I've got for these is: >> >>>>>>> >> >>>>>>> Device { >> >>>>>>> Name = LRADrive-1 >> >>>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'" >> >>>>>>> AlwaysOpen = yes >> >>>>>>> ArchiveDevice = /dev/nst0 >> >>>>>>> AutoChanger = yes >> >>>>>>> AutomaticMount = yes >> >>>>>>> DeviceType = Tape >> >>>>>>> DriveIndex = 0 >> >>>>>>> LabelMedia = no >> >>>>>>> MediaType = LTO-6 >> >>>>>>> RandomAccess = no >> >>>>>>> RemovableMedia = yes >> >>>>>>> } >> >>>>>>> >> >>>>>>> Device { >> >>>>>>> Name = LRADrive-2 >> >>>>>>> Alert Command = "sh -c 'smartctl -H -l error %c'" >> >>>>>>> AlwaysOpen = yes >> >>>>>>> ArchiveDevice = /dev/nst1 >> >>>>>>> AutoChanger = yes >> >>>>>>> AutomaticMount = yes >> >>>>>>> DeviceType = Tape >> >>>>>>> DriveIndex = 1 >> >>>>>>> LabelMedia = no >> >>>>>>> MediaType = LTO-6 >> >>>>>>> RandomAccess = no >> >>>>>>> RemovableMedia = yes >> >>>>>>> } >> >>>>>>> >> >>>>>>> Autochanger { >> >>>>>>> Name = LogRepoAutochanger >> >>>>>>> ChangerCommand = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d" >> >>>>>>> ChangerDevice = /dev/changer >> >>>>>>> Device = LRADrive-1 >> >>>>>>> Device = LRADrive-2 >> >>>>>>> } >> >>>>>>> >> >>>>>>> >> >>>>>>> I know there are some things that could be optimized here for >> >>>>>>> performance, and I'm certainly interested in them, but right now I >> >>>>>>> can't even label my tapes :) >> >>>>>>> >> >>>>>>> I suspect it's the long load delay, and I wasn't sure if maybe the >> >>>>>>> drive is searching for some mark or something. On that note, I >> >>>>>>> tried >> >>>>>>> to do a "rewind" and "weof" using the /dev/st0 device (wasn't sure >> >>>>>>> if >> >>>>>>> nst0 would complain about issuing a rewind), but I would get >> >>>>>>> "Input/Output error" messages from mt on both the rewind and weof >> >>>>>>> commands. >> >>>>>>> >> >>>>>>> Any advice I could get would be helpful. >> >>>>>>> >> >>>>>>> Thanks! >> >>>>>>> Andrew >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> >> >>>>>>> ------------------------------------------------------------------------------ >> >>>>>>> _______________________________________________ >> >>>>>>> Bacula-users mailing list >> >>>>>>> Bacula-users@lists.sourceforge.net >> >>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >>>>>> >> >>>> >> >>>> >> >>>> ------------------------------------------------------------------------------ >> >>>> _______________________________________________ >> >>>> Bacula-users mailing list >> >>>> Bacula-users@lists.sourceforge.net >> >>>> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >>> >> >>> >> >>> -- >> >>> "Większej miłości nikt nie ma nad tę, jak gdy kto życie swoje kładzie >> >>> za przyjaciół swoich." Jezus Chrystus >> >>> >> >>> >> >>> >> >>> ------------------------------------------------------------------------------ >> >>> _______________________________________________ >> >>> Bacula-users mailing list >> >>> Bacula-users@lists.sourceforge.net >> >>> https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> >> > >> > ------------------------------------------------------------------------------ >> > _______________________________________________ >> > Bacula-users mailing list >> > Bacula-users@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/bacula-users >> >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users