Thanks, it looks like that was the key thing I'd missed!
Best Regards,
James
On Jul 7, 2015, at 2:36 AM, Luc Van der Veken <luc...@wimionline.com> wrote:
> In your jobdefs, in default.conf:
>
> Max Full Interval = 90
>
> 90 what?
> Maybe make that “90 days” to be certain. I’m not entirely sure myself and
> it’s hard to find in the manual, but I think the default unit is seconds.
>
>
>
> From: James Chamberlain [mailto:jam...@exa.com]
> Sent: 07 July 2015 1:11
> To: bacula-users@lists.sourceforge.net
> Subject: [Bacula-users] Incrementals not happening
>
> Hi all,
>
> I'm trying to figure out what's wrong with my configuration. If run a full
> backup on the system Hawking, and then try to run an incremental against
> Hawking, the job gets promoted to full and I don't know why. If I do a
> restore against Hawking, the most recent full backup is found and Bacula is
> able to build a file system tree. To me, that says that the previous full
> backup ought to be suitable. I'm running Bacula 7.0.5.
>
> Does anyone have any suggestions?
>
> Thanks,
>
> James
>
>
>
> Director configuration stripped of passwords and attached below.
>
> As requested in the FAQ, here's the relevant section of the output from "list
> jobs":
>
> *list jobs
> +-------+---------------+---------------------+------+-------+------------+-------------------+-----------+
> | JobId | Name | StartTime | Type | Level | JobFiles |
> JobBytes | JobStatus |
> +-------+---------------+---------------------+------+-------+------------+-------------------+-----------+
> | 57 | Hawking | 2015-07-06 15:33:11 | B | F | 52,145 |
> 9,849,260,308 | T |
> | 59 | Hawking | 2015-07-06 15:55:25 | B | F | 52,145 |
> 9,852,606,517 | T |
> | 60 | Hawking | 2015-07-06 16:20:07 | B | F | 52,145 |
> 9,855,333,619 | T |
> +-------+---------------+---------------------+------+-------+------------+-------------------+-----------+
>
> Here's the Job report output from the prior Full save:
>
> 06-Jul 15:55 diesel-dir JobId 59: 06-Jul 15:55 diesel-dir JobId 59: No prior
> or suitable Full backup found in catalog. Doing FULL backup.
> 06-Jul 15:55 diesel-dir JobId 59: Start Backup JobId 59,
> Job=Hawking.2015-07-06_15.55.23_22
> 06-Jul 15:55 diesel-dir JobId 59: Using Device "LTO-5" to write.
> 06-Jul 15:55 diesel-sd JobId 59: Spooling data ...
> 06-Jul 16:04 diesel-sd JobId 59: Committing spooled data to Volume
> "AGM703L5". Despooling 9,869,706,491 bytes ...
> 06-Jul 16:12 diesel-sd JobId 59: Despooling elapsed time = 00:06:40, Transfer
> rate = 24.67 M Bytes/second
> 06-Jul 16:12 diesel-sd JobId 59: Elapsed time=00:17:17, Transfer rate=9.507 M
> Bytes/second
> 06-Jul 16:12 diesel-sd JobId 59: Sending spooled attrs to the Director.
> Despooling 11,030,831 bytes ...
> 06-Jul 16:13 diesel-dir JobId 59: Bacula diesel-dir 7.0.5 (28Jul14):
> Build OS: x86_64-unknown-linux-gnu redhat
> JobId: 59
> Job: Hawking.2015-07-06_15.55.23_22
> Backup Level: Full (upgraded from Incremental)
> Client: "Hawking" i686-redhat-linux-gnu,redhat,
> FileSet: "Hawking-FileSet" 2015-06-08 19:00:01
> Pool: "Default" (From Job resource)
> Catalog: "MyCatalog" (From Client resource)
> Storage: "LTO-5" (From Pool resource)
> Scheduled time: 06-Jul-2015 15:55:22
> Start time: 06-Jul-2015 15:55:25
> End time: 06-Jul-2015 16:13:01
> Elapsed time: 17 mins 36 secs
> Priority: 10
> FD Files Written: 52,145
> SD Files Written: 52,145
> FD Bytes Written: 9,852,606,517 (9.852 GB)
> SD Bytes Written: 9,859,413,603 (9.859 GB)
> Rate: 9330.1 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Accurate: no
> Volume name(s): AGM703L5
> Volume Session Id: 34
> Volume Session Time: 1432647685
> Last Volume Bytes: 2,372,386,996,224 (2.372 TB)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: OK
> SD termination status: OK
> Termination: Backup OK
>
> 06-Jul 16:13 diesel-dir JobId 59: Begin pruning Jobs older than 3 months .
> 06-Jul 16:13 diesel-dir JobId 59: No Jobs found to prune.
> 06-Jul 16:13 diesel-dir JobId 59: Begin pruning Files.
> 06-Jul 16:13 diesel-dir JobId 59: No Files found to prune.
> 06-Jul 16:13 diesel-dir JobId 59: End auto prune.
>
> Here's the output of "list jobid=59", for the job ID prior to the Full save:
>
> *llist jobid=59
> JobId: 59
> Job: Hawking.2015-07-06_15.55.23_22
> Name: Hawking
> PurgedFiles: 0
> Type: B
> Level: F
> ClientId: 5
> Name: Hawking
> JobStatus: T
> SchedTime: 2015-07-06 15:55:22
> StartTime: 2015-07-06 15:55:25
> EndTime: 2015-07-06 16:13:01
> RealEndTime: 2015-07-06 16:13:01
> JobTDate: 1,436,213,581
> VolSessionId: 34
> VolSessionTime: 1,432,647,685
> JobFiles: 52,145
> JobErrors: 0
> JobMissingFiles: 0
> PoolId: 1
> PooLname: Default
> PriorJobId: 0
> FileSetId: 8
> FileSet: Hawking-FileSet
> HasCache: 0
>
> Here's the job report output from the save that is doing the wrong thing:
>
> 06-Jul 16:20 diesel-dir JobId 60: 06-Jul 16:20 diesel-dir JobId 60: No prior
> or suitable Full backup found in catalog. Doing FULL backup.
> 06-Jul 16:20 diesel-dir JobId 60: Start Backup JobId 60,
> Job=Hawking.2015-07-06_16.20.04_23
> 06-Jul 16:20 diesel-dir JobId 60: Using Device "LTO-5" to write.
> 06-Jul 16:20 diesel-sd JobId 60: Spooling data ...
> 06-Jul 16:29 diesel-sd JobId 60: Committing spooled data to Volume
> "AGM703L5". Despooling 9,872,436,161 bytes ...
> 06-Jul 16:37 diesel-sd JobId 60: Despooling elapsed time = 00:06:38, Transfer
> rate = 24.80 M Bytes/second
> 06-Jul 16:37 diesel-sd JobId 60: Elapsed time=00:17:18, Transfer rate=9.501 M
> Bytes/second
> 06-Jul 16:37 diesel-sd JobId 60: Sending spooled attrs to the Director.
> Despooling 11,030,831 bytes ...
> 06-Jul 16:37 diesel-dir JobId 60: Bacula diesel-dir 7.0.5 (28Jul14):
> Build OS: x86_64-unknown-linux-gnu redhat
> JobId: 60
> Job: Hawking.2015-07-06_16.20.04_23
> Backup Level: Full (upgraded from Incremental)
> Client: "Hawking" i686-redhat-linux-gnu,redhat,
> FileSet: "Hawking-FileSet" 2015-06-08 19:00:01
> Pool: "Default" (From Job resource)
> Catalog: "MyCatalog" (From Client resource)
> Storage: "LTO-5" (From Pool resource)
> Scheduled time: 06-Jul-2015 16:20:03
> Start time: 06-Jul-2015 16:20:07
> End time: 06-Jul-2015 16:37:46
> Elapsed time: 17 mins 39 secs
> Priority: 10
> FD Files Written: 52,145
> SD Files Written: 52,145
> FD Bytes Written: 9,855,333,619 (9.855 GB)
> SD Bytes Written: 9,862,140,705 (9.862 GB)
> Rate: 9306.3 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Accurate: no
> Volume name(s): AGM703L5
> Volume Session Id: 35
> Volume Session Time: 1432647685
> Last Volume Bytes: 2,382,257,654,784 (2.382 TB)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: OK
> SD termination status: OK
> Termination: Backup OK
>
> 06-Jul 16:37 diesel-dir JobId 60: Begin pruning Jobs older than 3 months .
> 06-Jul 16:37 diesel-dir JobId 60: No Jobs found to prune.
> 06-Jul 16:37 diesel-dir JobId 60: Begin pruning Files.
> 06-Jul 16:37 diesel-dir JobId 60: No Files found to prune.
> 06-Jul 16:37 diesel-dir JobId 60: End auto prune.
>
> Here's the output of "list jobid=60" where 60 is the JobID of the job that
> was not correct:
>
> *llist jobid=60
> JobId: 60
> Job: Hawking.2015-07-06_16.20.04_23
> Name: Hawking
> PurgedFiles: 0
> Type: B
> Level: F
> ClientId: 5
> Name: Hawking
> JobStatus: T
> SchedTime: 2015-07-06 16:20:03
> StartTime: 2015-07-06 16:20:07
> EndTime: 2015-07-06 16:37:46
> RealEndTime: 2015-07-06 16:37:46
> JobTDate: 1,436,215,066
> VolSessionId: 35
> VolSessionTime: 1,432,647,685
> JobFiles: 52,145
> JobErrors: 0
> JobMissingFiles: 0
> PoolId: 1
> PooLname: Default
> PriorJobId: 0
> FileSetId: 8
> FileSet: Hawking-FileSet
> HasCache: 0
>
>
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
