On 7.11.2015 20:02, Jari Fredriksson wrote: > Hello. > > I have a home LAN backup system, running on Bacula since the very > beginning of Bacula. > > I have never used Migration/Copy or Archive type jobs, but now > planning > to go that route. > > My backup machines is an old Pentium 4 powered HP Compaq with 3 GB > RAM > and 2 x 800 GB Sata disks in RAID 1 setup. That can currently support > only 1 Full and then diffs and incrementals for a month. I would like > to > keep older data also, as there has been occasions when some system > dies > and I have not had time to replace it in a month, so there has been > NO a > single backup to restore from! > > Currently using CentOS 6 in it, and Bacula 5.2.13. Planning on using > Copy jobs, so that the Copy Pool will reside in a second machine, a > Raspberry Pi 2 with an 4 TB USB disk. > > Some ponderings. > > 1) Why not a Copy, but rather Migrate? Would there be any advantages > in > that, if the saved disk space is not one? > 2) Would it be better to use a separate Storage daemon on the Raspi, > instead of just a nfs share? Advantages for the alternatives? It > appears > that the bacula-fd version on Raspian is 5.2.6. > > That for starters. Any opinions and suggestions on the matter?
This seems to be a JFK, as Brendan Martin just asked similar question. It became clear that 5.2 does not support multiple Storages on a Copy job... -- jarif.bit ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
