Thanks. I have pushed the fix to the public git repository. If you find that it does not fix your problem, please let me know.
Best regards, Kern On 02/16/2016 10:07 AM, Brady, Mike wrote: > Kern, > > I had already done your suggested work around of increasing the Maximum > Volumes parameter, changing the slot for the volume and then changing > Maximum Volumes back to the original value. Everything seems to be > working fine. > > Bug logged http://bugs.bacula.org/view.php?id=2208 > > Thanks > > Mike > > > On 2016-02-15 19:23, Kern Sibbald wrote: >> Hello, >> >> Well, this *is* a bug. I would appreciate it if you would submit a bug >> report. The interesting thing the bug has been there since 2006. If >> you are a programmer look somewhere around line 295 in >> src/dird/ua_update.c. >> >> If you are not a programmer, please set the maximum volumes in your >> pool to 0 or a very big number, do your update slots, and then reset >> your maximum volumes. I haven't tried it, but it should work. These >> days most 10 slot autochangers have barcodes, and if you have them, it >> would be simpler to simply put the volumes in the right slots then do: >> >> update slots barcodes >> >> otherwise provided the Volumes are labeled you can do an >> >> update slots >> >> but it will have to mount and physically read every tape. >> >> Best regards, >> Kern >> >> On 02/15/2016 09:33 AM, Brady, Mike wrote: >>> I am setting a up a new Bacula 7.4 system and have run into an issue >>> that I do not understand. >>> >>> I have a 10 slot autochanger that I have been using since the 5.0.x >>> days >>> through to 7.0.x. I cannot remember when I last did a clean install >>> though. Everything has been upgraded over time, so I am not sure when >>> this became an issue. It could have been an issue all along and I >>> have >>> just forgotten. >>> >>> In the 10 slot auto changer I have 4 daily volumes (from the >>> P-Tape-Daily pool), 4 weekly volumes (from the P-Tape-Weekly pool) and >>> 2 >>> monthly volumes (from the P-Tape-Monthly pool). >>> >>> On the existing 7.0.5 system the volumes are configured in the >>> catalogue >>> as being in the autochanger slots as follows: >>> P-Daily-Tape-001 1 >>> P-Daily-Tape-002 2 >>> P-Daily-Tape-002 3 >>> P-Daily-Tape-002 4 >>> P-Weekly-Tape-001 5 >>> P-Weekly-Tape-002 6 >>> P-Weekly-Tape-003 7 >>> P-Weekly-Tape-004 8 >>> P-Monthly-Tape-001 9 >>> P-Monthly-Tape-001 10 >>> >>> Each Pool has Maximum Volumes set as follows: >>> P-Tape-Daily 4 >>> P-Tape-Weekly 4 >>> P-Tape-Monthly 2 >>> >>> The same configuration is intended for the new 7.4 system. >>> >>> To that end, on the new system I have labelled all the tapes and am >>> now >>> trying to set the autochanger slot for each volume with the update >>> command in bconsole. The Daily-Pool volumes all updated successfully, >>> but when I go to do the P-Tape-Weekly volumes I get >>> >>> *update volume=P-Tape-Weekly-001 slot=5 >>> Invalid slot, it must be between 0 and Maximum Volumes=4 >>> >>> I do not understand what the Pool Maximum Volume setting has to do >>> with >>> the autochanger slot number. I have confirmed that it is the >>> P-Tape-Weekly Pool Maximum Volumes causing the issue by increasing it >>> to >>> 8. I can now change the slots for the P-Tape-Weekly volumes to 5-8 as >>> required. Once the slots have been changed I can change the Maximum >>> Volumes back to 4 and everything works as it should. At least I think >>> it does. Still doing some testing. >>> >>> Same thing for P-Tape-Monthly except Maximum Volumes needs to be 10. >>> >>> Is this a bug or have I been something wrong all this time? >>> >>> Regards >>> >>> Mike >>> >>> ------------------------------------------------------------------------------ >>> Site24x7 APM Insight: Get Deep Visibility into Application Performance >>> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >>> Monitor end-to-end web transactions and take corrective actions now >>> Troubleshoot faster and improve end-user experience. Signup Now! >>> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >>> _______________________________________________ >>> Bacula-users mailing list >>> Bacula-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/bacula-users >>> > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
