Hello, The problems you are experiencing are with your tape drive. Your best bet would be to contact a support person at Tandberg (HP?).
Unfortunately, I am not very positive about Tandberg products: I own a Tandberg LTO-4 autochanger. The original drive they sold me was unable to load/unload cartridges after about 1 week of use, I sent it back and they sent me a second autochanger, but after about 6 months it was no longer able to load/unload cartridges -- they always get stuck. So for the last 3 or 4 years this defective autochanger has now been a piece of unused hardware waiting for me to find the time to take it to the dump (a lot of money down the drain). I have had quite a few autochangers over the years (probably 5 or 6) (HP, Overland, Sun StorageTek, and Tandberg) and the Tandberg LTO-4s were the only autochangers that ever failed. Best regards, Kern On 05/28/2016 12:26 PM, szolnoki wrote: > Hi, > > I have a problem, with my Tandberg (rebranded HP) LTO-5 drive. > The drive like a new (less than 6 months, lightly used), and I use only new > HP cartridges. > > When I write the cartridges, I see 8-10 "0x750b miWriteFaultDSPTapeOffTrack" > and "0x0 GOOD" events EVERY 2ND warps. > "Rewritten CCQs" in "Write Error Counters" isn't 0. And I see other than 0 in > row "Offtrack count" at every 2nd warp in "Write Fault Counters". > > I tested 2 another drives, with new cartridges, same result. > The write successfully, I can read back later. > > I use HPE L&TT utility to make a Healt dump. > > Are dozens of off track events (40-50 per full cartridge write) normal? > > Can anybody check this on own drive? > (Write a cartridge any way, and before eject the cartridge make a Health Dump > wit HPE L&TT tools. And see the dump with "Everything" detail level.) > > Thank you, for any help. > > +---------------------------------------------------------------------- > |This was sent by [email protected] via Backup Central. > |Forward SPAM to [email protected]. > +---------------------------------------------------------------------- > > > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity > planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e > _______________________________________________ > Bacula-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
