On Thursday, June 1, 2017 11:27:49 PM EDT Ivan Adzhubey wrote:
> [7:0:0:0] mediumx QUALSTAR TLS-8466 227d /dev/sch0 /dev/sg4
> [8:0:0:0] tape IBM ULTRIUM-HH5 BBNF /dev/st0 /dev/sg2
> [8:0:1:0] tape IBM ULTRIUM-HH5 BBNF /dev/st1 /dev/sg3
>
> But I am still confused about few bits of configuration not very well
> explained in the documentation. I have used LTO-4 Device section from the
> distribution bacula-sd.conf file as a template. Here is my questions:
>
> a) I have added ChangerDevice directive to the Device resources for the
> drives, pointing to their corresponding raw SCSI devices (/dev/sg2, /dev/
> sga3), while Autochager has ChangerDevice configured as /dev/sg4. Is this
> configuration correct? I am assuming these tape raw devices only used for
> the purpose of running AlertCommand on the drives?
Obviously, the above assumption was wrong because btape crashes if I specify
anything other then the autochanger's raw SCSI device as the ChangerDevice
under Device resource for the tape drives.
Does this mean Device {...} will not localize variables specified inside them?
What about other resources? I could not find anything in the documentation
regarding the variables scope inside bacula-X.conf files.
Of course, I might simply hardcode /dev/sgX names into TapeAlert strings.
Thanks,
Ivan
The information in this e-mail is intended only for the person to whom it is
addressed. If you believe this e-mail was sent to you in error and the e-mail
contains patient information, please contact the Partners Compliance HelpLine at
http://www.partners.org/complianceline . If the e-mail was sent to you in error
but does not contain patient information, please contact the sender and properly
dispose of the e-mail.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
