Hi.
When i use SD with Disk (SD, USB, NAS, SAN, etc).
I add volumen with the command: add
And i add for example 50 volumen.
Because (i view) the command label only add 1 volumen.
i use Label only when my SD is a Tape Library.
Note: you have 2 Autochanger: FileChgr2 and FileChgr2
You must add volumen you should on the 2 Autochanger.
Sorry for my English.
On Tue, Jul 11, 2017 at 3:44 AM, bacula <bac...@estacha.de> wrote:
> Hi all,
>
> my current setup is director on a vm and sd is running on a qnap nas.
> Everything
> went fine runing all daemons on a single virtual machine writing to an nfs
> mount of the qnap.
>
> To improve performance in particualr for the bigger jobs we installed
> bacula directly on qnap to have the sd running there. Now we got the
> follwing problem.
>
> Autolabeling doesn't work anymore. After starting a job I got the
> following message:
>
>
> From: root@bacula <r...@bacula.jws.local> <root@bacula
> <r...@bacula.jws.local>>
> Sent: Mon Jul 10 00:05:19 2017
> To: admin
> Cc:
> Subject: Bacula: Intervention needed for shares.2017-07-09_23.05.00_13
> Auto forwarded by a rule
>
> 10-Jul 00:05 qnap4-sd JobId 1: Job shares.2017-07-09_23.05.00_13 is
> waiting. Cannot find any appendable volumes.
> Please use the "label" command to create a new Volume for:
> Storage: "FileChgr1-Dev2" (/opt/bacula/tapes)
> Pool: File
> Media type: File1
>
>
> That message never apperead on the single machine setup. The labels were
> properly autolabeled.
> Nevertheless I tried to label a tape.
>
> user@bacula:~# bconsole
> Connecting to Director localhost:9101
> 1000 OK: 1 bacula-dir Version: 7.0.5 (28 July 2014)
> Enter a period to cancel a command.
> *label
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> The defined Storage resources are:
> 1: File1
> 2: File2
> Select Storage resource (1-2): 1
> Enter new Volume name: TestVolume001
> Defined Pools:
> 1: Default
> 2: File
> 3: Scratch
> Select the Pool (1-3): 2
> Connecting to Storage daemon File1 at qnap4.jws.local:9103 ...
> Sending label command for Volume "TestVolume001" Slot 0 ...
> 3000 OK label. VolBytes=195 VolABytes=0 VolType=1 Volume="TestVolume001"
> Device="FileChgr1-Dev1" (/opt/bacula/tapes)
> Label command failed for Volume TestVolume001.
> Do not forget to mount the drive!!!
>
>
>
> SD creates the volume properly (as fare as I can see in the fielsystem)
> but director doesn't recognize it.
>
>
> Can someone please point me to the right direction how to get it work?
>
>
> cheers
>
> Holger
>
>
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> bacula-dir.conf
>
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Director { # define myself
> Name = bacula-dir
> DIRport = 9101 # where we listen for UA connections
> QueryFile = "/etc/bacula/scripts/query.sql"
> WorkingDirectory = "/var/lib/bacula"
> PidDirectory = "/var/run"
> Maximum Concurrent Jobs = 20
> Password = "xyz" # Console password
> Messages = Daemon
> }
>
> JobDefs {
> Name = "DefaultJob"
> Type = Backup
> Level = Incremental
> Client = bacula-fd
> FileSet = "Full Set"
> Schedule = "WeeklyCycle"
> Storage = File1
> Messages = Standard
> Pool = File
> SpoolAttributes = yes
> SpoolData = yes
> Priority = 10
> Write Bootstrap = "/var/lib/bacula/working/%c.bsr"
> }
>
> Job {
> Name = "BackupCatalog"
> JobDefs = "DefaultJob"
> Level = Full
> FileSet="Catalog"
> Schedule = "WeeklyCycleAfterBackup"
> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup"
> Write Bootstrap = "/etc/bacula/working/%n.bsr"
> Priority = 11 # run after main backup
> }
>
> Job {
> Name = "RestoreFiles"
> Type = Restore
> Client= bacula-fd
> Storage = File1
> # The FileSet and Pool directives are not used by Restore Jobs
> # but must not be removed
> FileSet="Full Set"
> Pool = File
> Messages = Standard
> Where = /nonexistant/path/to/file/archive/dir/bacula-restores
> }
>
> Job {
> Name = samba4
> JobDefs = DefaultJob
> Client = samba4-fd
> FileSet = samba4
> Storage = File1
> Messages = Standard
> Client Run Before Job = /root/bin/backups
> Enabled = no
> }
>
> # List of files to be backed up
> FileSet {
> Name = "Full Set"
> Include {
> Options {
> signature = MD5
> }
> File = /opt/sbin
> }
> Exclude {
> File = /opt/bacula/working
> File = /opt/bacula/tmp
> File = /proc
> File = /tmp
> File = /sys
> File = /.journal
> File = /.fsck
> }
> }
>
> FileSet {
> Name = samba4
> Include {
> File = /opt
> File = /srv/home
> File = /srv/profiles
> File = /srv/backup
> Options {
> Signature = MD5
> Compression = GZIP5
> }
> }
> }
>
> Schedule {
> Name = "WeeklyCycle"
> Run = Full 1st sun at 23:05
> Run = Differential 2nd-5th sun at 23:05
> Run = Incremental mon-sat at 23:05
> }
>
> WeeklyCycle
> Schedule {
> Name = "WeeklyCycleAfterBackup"
> Run = Full sun-sat at 23:10
> }
>
> FileSet {
> Name = "Catalog"
> Include {
> Options {
> signature = MD5
> }
> File = "/var/lib/bacula/bacula.sql"
> }
> }
>
> Client {
> Name = samba4-fd
> Password = "4711"
> Address = samba.local
> FDPort = 9102
> Catalog = MyCatalog
> File Retention = 30 days # 30 days
> Job Retention = 6 months # six months
> AutoPrune = yes
> }
>
> Storage {
> Name = File1
> Address = qnap.local # N.B. Use a fully qualified name here
> SDPort = 9103
> Password = "123"
> Device = FileChgr1
> Media Type = File1
> Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same time
> }
>
> Storage {
> Name = File2
> Address = qnap.local # N.B. Use a fully qualified name here
> SDPort = 9103
> Password = "123"
> Device = FileChgr2
> Media Type = File2
> Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same time
> }
>
> Catalog {
> Name = MyCatalog
> dbname = "bacula"; dbuser = "root"; dbpassword = "mysqldb_passwd"
> }
>
> address
> Messages {
> Name = Standard
> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
> \"Bacula: %t %e of %c %l\" hwoe...@jws.eu"
> operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\"
> -s \"Bacula: Intervention needed for %j\" hwoe...@jws.eu"
> mail = root = all, !skipped
> operator = root = mount
> console = all, !skipped, !saved
> append = "/var/log/bacula/bacula.log" = all, !skipped
> catalog = all
> }
>
> Messages {
> Name = Daemon
> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s
> \"Bacula daemon message\" %r"
> mail = root = all, !skipped
> console = all, !skipped, !saved
> append = "/var/log/bacula/bacula.log" = all, !skipped
> }
>
> Pool {
> Name = Default
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle
> Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 365 days # one year
> Maximum Volume Bytes = 50G # Limit Volume size to something
> reasonable
> Maximum Volumes = 100 # Limit number of Volumes in Pool
> Label Format = "Vol-"
> }
>
> Pool {
> Name = File
> Pool Type = Backup
> Recycle = yes # Bacula can automatically recycle
> Volumes
> AutoPrune = yes # Prune expired volumes
> Volume Retention = 365 days # one year
> Maximum Volume Bytes = 50G # Limit Volume size to something
> reasonable
> Maximum Volumes = 100 # Limit number of Volumes in Pool
> Label Format = "Vol-" # Auto label
> }
>
> Pool {
> Name = Scratch
> Pool Type = Backup
> }
>
> Console {
> Name = bacula-mon
> Password = "xyz"
> CommandACL = status, .status
> }
>
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> bacula-sd.conf
>
> xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
> Storage { # definition of myself
> Name = qnap-sd
> SDPort = 9103 # Director's port
> WorkingDirectory = "/opt/bacula/working"
> Pid Directory = "/opt/var/run"
> Maximum Concurrent Jobs = 20
> }
>
> Director {
> Name = bacula-dir
> Password = "xyz"
> }
>
> Director {
> Name = bacula-mon
> Password = "123"
> Monitor = yes
> }
>
> Autochanger {
> Name = FileChgr1
> Device = FileChgr1-Dev1, FileChgr1-Dev2
> Changer Command = ""
> Changer Device = /dev/null
> }
>
> Device {
> Name = FileChgr1-Dev1
> Media Type = File1
> Archive Device = /opt/bacula/tapes
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> Maximum Concurrent Jobs = 5
> }
>
> Device {
> Name = FileChgr1-Dev2
> Media Type = File1
> Archive Device = /opt/bacula/tapes
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> Maximum Concurrent Jobs = 5
> }
>
> Autochanger {
> Name = FileChgr2
> Device = FileChgr2-Dev1, FileChgr2-Dev2
> Changer Command = ""
> Changer Device = /dev/null
> }
>
> Device {
> Name = FileChgr2-Dev1
> Media Type = File2
> Archive Device = /opt/bacula/tapes
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> Maximum Concurrent Jobs = 5
> }
>
> Device {
> Name = FileChgr2-Dev2
> Media Type = File2
> Archive Device = /opt/bacula/tapes
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> Maximum Concurrent Jobs = 5
> }
>
> Messages {
> Name = Standard
> director = bacula-dir = all
> }
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
#############################
# Sistema Operativo: Debian #
# Caracas, Venezuela #
#############################
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
