Hello Daniel,
This is usually to the drive tape being used on locked by any other process.
For example, you cannot even btape tests and have the tape drive locked by
Bacula Storage Daemon.
Best regards,
Ana
El 20 jul. 2017 21:10, "Hicks, Daniel CTR OSD DMEA" <
daniel.hicks....@dmea.osd.mil> escribió:
Hello all,
I am running Bacula 7.4.7 on a Centos 7 server with a HP-Overland tape /
autoloader.
Within bconsole I can inventory the autoloader, mount and move tapes
around.
However, when I run btape –c /etc/bacula/bacula-sd.conf /dev/nst0 I get the
following:
20-July 11:54 btape: Fatal Error ad device.c:300 because:
Dev open failed: tape_dev.c:164 Unable to open device “HP-Overland”
(/dev/nst0): ERR=Device or resource busy
Btape: butyl.c:199-0 Cannot open “HP-Overland” (/dev/nst0)
20-Jul 11:59 btape JobId 0: Fatal error: butyl.c:199 Cannot open
“HP-Overland” (/dev/nst0)
Any help would be great
Thanks
Daniel Hicks
Senior Systems Analyst
FutureWorld Technologies Inc.
DMEA IT Support
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
