Kern,
My Offsite Backup just failed again on the same drive, different disk. It
failed with the same bsock error. If the backup is working on the same
system using the copy function, how far out of the network stack does it
go. My thinking is it does not get out of the application layer. Is this
right? Why would I get a bsock error?
I have taken a look at the smart data for the disk and they seem to be
running okay. I am getting some sector relocation errors, would that cause
the bsock error during a remap? This procedure has been running flawlessly
for many years ( except for human error ). I am wondering if I should
delete the present disk files and let bacula recreate new ones.
thanks for your help!
jerry
On Wed, Sep 6, 2017 at 11:26 PM, Kern Sibbald <k...@sibbald.com> wrote:
> Hello,
>
> If the job is marked as Incomplete in the catalog ("I" I think), then you
> can simply restart it and it should pickup where it left off. If not you
> must run it again from the beginning.
>
> If you are switching devices when one is full during a Job, it is unlikely
> you can restore that job when it terminates. I recommend carefully testing
> restores on your system.
>
> Best regards,
>
> Kern
>
> On 09/06/2017 05:38 PM, Jerry Lowry wrote:
>
> List,
> I am running, bacula 9.0.3, Mariadb 12.2.8 on Centos 6.9. I got notice
> last night that my Offsite backup failed due to a bsock error. My offsite
> drives are attached to an ATTO raid card which gives me hot swap
> capability. This configuration works great as it allows me to hot swap a
> drive when it fills up with a new drive to continue with. The problem is
> included below. The backup that I was doing is to the OffsiteMid drive
> which is mounted as /dev/sde. Is there a way to restart this backup job or
> am I left with an incomplete backup going forward.
>
> thanks for your help,
>
> jerry
>
>
> Sep 5 08:46:01 kilchis bat[4339]: bsock.c:147 Unable to connect to
> Director dae
> mon on kilchis:9101. ERR=Connection refused
> Sep 5 10:37:20 kilchis attocfgd: [CRIT] [ExpressSAS
> R608,50:01:08:60:00:57:3d:c
> 0] [FW] RAID Group state now Offline: OffsiteTop
> Sep 5 10:39:06 kilchis kernel: scsi 5:0:1:0: Direct-Access ATTO
> Offsite
> Top00 0001 PQ: 0 ANSI: 5
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: Attached scsi generic sg6 type
> 0
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Write Protect is off
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Write cache: enabled,
> read cac
> he: enabled, doesn't support DPO or FUA
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 10:39:06 kilchis kernel: sdd: unknown partition table
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 10:39:06 kilchis kernel: sd 5:0:1:0: [sdd] Attached SCSI disk
> Sep 5 10:39:35 kilchis kernel: sd 5:0:1:0: [sdd] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 10:39:35 kilchis kernel: sdd:
> Sep 5 10:44:54 kilchis kernel: EXT4-fs (sdd): mounted filesystem with
> ordered d
> ata mode. Opts:
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 11:02:38 kilchis bacula-dir[4373]: bsock.c:537 Socket has errors=1
> on cal
> l to client:10.20.10.21:9101
> Sep 5 13:45:48 kilchis attocfgd: [CRIT] [ExpressSAS
> R608,50:01:08:60:00:57:3d:c
> 0] [FW] RAID Group state now Offline: OffsiteMid
> Sep 5 13:45:53 kilchis attocfgd: [CRIT] [ExpressSAS
> R608,50:01:08:60:00:57:3d:c
> 0] [FW] RAID Group state now Offline: OffsiteTop
> Sep 5 13:47:52 kilchis kernel: scsi 5:0:1:0: Direct-Access ATTO
> Offsite
> Mid00 0001 PQ: 0 ANSI: 5
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: Attached scsi generic sg6 type
> 0
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] Write Protect is off
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] Write cache: enabled,
> read cac
> he: enabled, doesn't support DPO or FUA
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 13:47:52 kilchis kernel: sde: unknown partition table
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 13:47:52 kilchis kernel: sd 5:0:1:0: [sde] Attached SCSI disk
> Sep 5 13:48:01 kilchis kernel: EXT4-fs error (device sdd):
> __ext4_get_inode_loc
> : unable to read inode block - inode=2, block=1057
> Sep 5 13:48:01 kilchis kernel: Buffer I/O error on device sdd, logical
> block 0
> Sep 5 13:48:01 kilchis kernel: lost page write due to I/O error on sdd
> Sep 5 13:48:01 kilchis kernel: EXT4-fs error (device sdd) in
> ext4_reserve_inode
> _write: IO failure
> Sep 5 13:48:01 kilchis kernel: EXT4-fs (sdd): previous I/O error to
> superblock
> detected
> Sep 5 13:48:01 kilchis kernel: Buffer I/O error on device sdd, logical
> block 0
> Sep 5 13:48:01 kilchis kernel: lost page write due to I/O error on sdd
> Sep 5 13:48:06 kilchis kernel: Aborting journal on device sdd-8.
> Sep 5 13:48:06 kilchis kernel: Buffer I/O error on device sdd, logical
> block 24
> 3826688
> Sep 5 13:48:06 kilchis kernel: lost page write due to I/O error on sdd
> Sep 5 13:48:06 kilchis kernel: JBD2: I/O error detected when updating
> journal s
> uperblock for sdd-8.
> Sep 5 13:48:08 kilchis kernel: EXT4-fs error (device sdd):
> ext4_put_super: Coul
> dn't clean up the journal
> Sep 5 13:48:08 kilchis kernel: EXT4-fs (sdd): Remounting filesystem
> read-only
> Sep 5 13:48:44 kilchis kernel: sd 5:0:1:0: [sde] 488366336 4096-byte
> logical bl
> ocks: (2.00 TB/1.81 TiB)
> Sep 5 13:48:44 kilchis kernel: sde:
> Sep 5 13:54:05 kilchis kernel: EXT4-fs (sde): mounted filesystem with
> ordered d
> ata mode. Opts:
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Bacula-users mailing
> listBacula-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
