On 02/19/2018 08:57 AM, Mike Eggleston wrote:
> Sorry it took me a while to get this answer... life is...
[...snip...]
> Running Jobs:
> Console connected at 19-Feb-18 09:05
> JobId Type Level Files Bytes Name Status
> ======================================================================
> 112 Back Virt 0 0 dvlnx107-vf is waiting on max
> Storage jobs
> 132 Back Virt 0 0 dvlnx107-vf is waiting on max
> Storage jobs
> ====
[...snip...]
Hi Mike,
Consider that when a Virtual Full is run, it needs one device to read from and
one device to write to.
Notice the "is waiting on max Storage jobs" messages? It is probable that
you have not added a "MaximumConcurrentJobs" (MCJ) setting to your Director's
Storage{} resource, or in the bacula-sd.conf file's Main Storage{} resource
where the SD is defined.
It is possible that you are trying to use a DIR Storage resource that points
to a single device in the SD... You will want to set up an Autochanger with
more than one device in it.
Also, if you do not explicitly set an MCJ, it defaults to (1) for just about
every resource you can think of:
- DIR
- SD
- FD
- Job
- Dir Storage resource
- SD Storage/Autochanger resource
- SD Devices
Hope this helps you track this down.
Best regards,
Bill
--
Bill Arlofski
http://www.revpol.com/bacula
-- Not responsible for anything below this line --
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
