Hello,
This is really strange ...
Here's below my repo configuration
[Bacula]
name=Bacula - Community
baseurl=http://www.bacula.org/packages/xxxxxxxxxxxx/rpms/9.0.8/el7/x86_64
enabled=1
protect=0
gpgcheck=1
Then when I install bacula-postgresql
# yum install bacula-postgresql
Loaded plugins: fastestmirror
Repository 'Bacula-Community' is missing name in configuration, using id
Loading mirror speeds from cached hostfile
* base: mirror1.hs-esslingen.de
* extras: centos.bio.lmu.de
* updates: centos.bio.lmu.de
Bacula-Community
| 2.9 kB 00:00:00
Bacula-Community/primary_db
| 15 kB 00:00:00
Resolving Dependencies
--> Running transaction check
---> Package bacula-postgresql.x86_64 0:9.0.8-2.el7 will be installed
--> Processing Dependency: bacula-libs for package:
bacula-postgresql-9.0.8-2.el7.x86_64
--> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
bacula-postgresql-9.0.8-2.el7.x86_64
--> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
bacula-postgresql-9.0.8-2.el7.x86_64
--> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
bacula-postgresql-9.0.8-2.el7.x86_64
--> Running transaction check
---> Package bacula-libs.x86_64 0:9.0.8-2.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
===================================================================================================================================================================================
Package
Arch
Version
Repository Size
===================================================================================================================================================================================
Installing:
bacula-postgresql
x86_64
9.0.8-2.el7
Bacula-Community 3.0 M
Installing for dependencies:
bacula-libs
x86_64
9.0.8-2.el7
Bacula-Community 772 k
Transaction Summary
===================================================================================================================================================================================
Install 1 Package (+1 Dependent package)
Total download size: 3.8 M
Installed size: 3.8 M
Is this ok [y/d/N]:
Did you clear up your yum cache ?
Best regards
Davide
On Wed, Jun 27, 2018 at 12:44 PM, Wanderlei Huttel <
wanderleihut...@gmail.com> wrote:
> Hello
>
> In the chapter 15, the correct command to import bacula key is:
> rpm --import Bacula-4096-Distribution-Verification-key.asc
>
> Instead: rpm --import add Bacula-4096-Distribution-Verification-key.asc
>
>
> I've followed Davide steps but MariaDB packages are still been showed as
> dependencies
>
>
> [root@bacula yum.repos.d]# yum install bacula-postgresql
> Plugins carregados: fastestmirror
> Loading mirror speeds from cached hostfile
> * base: mirror.ci.ifes.edu.br
> * epel: mirror.ci.ifes.edu.br
> * extras: mirror.ci.ifes.edu.br
> * updates: mirror.ci.ifes.edu.br
> Resolvendo dependências
> --> Executando verificação da transação
> ---> O pacote bacula-postgresql.x86_64 0:9.0.8-2.el7 será instalado
> --> Processando dependência: bacula-libs para o pacote:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processando dependência: perl(Logwatch) para o pacote:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processando dependência: libbac-9.0.8.so()(64bit) para o pacote:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processando dependência: libbaccfg-9.0.8.so()(64bit) para o pacote:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Processando dependência: libbacfind-9.0.8.so()(64bit) para o pacote:
> bacula-postgresql-9.0.8-2.el7.x86_64
> --> Executando verificação da transação
> ---> O pacote bacula-libs.x86_64 0:9.0.8-2.el7 será instalado
> ---> O pacote bacula-mysql.x86_64 0:9.0.8-2.el7 será instalado
> --> Processando dependência: mysql para o pacote:
> bacula-mysql-9.0.8-2.el7.x86_64
> --> Executando verificação da transação
> ---> O pacote mariadb.x86_64 1:5.5.56-2.el7 será instalado
> --> Resolução de dependências finalizada
>
> Dependências resolvidas
>
> ============================================================
> ============================================================
> ============================================================
> =================
> Package Arq.
> Versão Repo
> Tam.
> ============================================================
> ============================================================
> ============================================================
> =================
> Instalando:
> bacula-postgresql x86_64
> 9.0.8-2.el7
> Bacula-Community 3.0 M
> Instalando para as dependências:
> bacula-libs x86_64
> 9.0.8-2.el7
> Bacula-Community 772 k
> bacula-mysql x86_64
> 9.0.8-2.el7
> Bacula-Community 3.0 M
> mariadb x86_64
> 1:5.5.56-2.el7 base
> 8.7 M
>
> Resumo da transação
> ============================================================
> ============================================================
> ============================================================
> =================
> Instalar 1 Package (+3 Dependent packages)
>
> Tamanho total do download: 16 M
> Tamanho depois de instalado: 74 M
> Is this ok [y/d/N]:
>
>
>
> Best Regards
>
> *Wanderlei Hüttel*
> www.bacula.com.br
>
> Em qua, 27 de jun de 2018 às 05:59, Davide Franco <bacula-...@dflc.ch>
> escreveu:
>
>> Hello,
>>
>> It does works fine for me.
>>
>> Try to clean up your local yum cache and try again please.
>>
>> $ sudo yum clean all
>> $ sudo rm -rm /var/yum/cache
>> & sudo yum check-update
>>
>> Hope it helps
>>
>> Davide
>>
>> On Wed, 27 Jun 2018 at 10:33, Olivier Delestre <
>> olivier.deles...@univ-rouen.fr> wrote:
>>
>>> And i test quickly and :(
>>> Thanks for your works :)
>>> ---
>>> My Bacula.repo
>>>
>>> [Bacula-Community]
>>> name=CentOS - Bacula - Community
>>> baseurl=http://bacula.org/packages/xxxxxxxxxxxx/rpms/9.0.8/el7/x86_64
>>> enabled=1
>>> protect=0
>>> gpgcheck=0
>>>
>>>
>>>
>>> ---
>>> yum install bacula-postgresql
>>> Loaded plugins: etckeeper, fastestmirror
>>> Loading mirror speeds from cached hostfile
>>> * epel: mirrors.ircam.fr
>>> Resolving Dependencies
>>> --> Running transaction check
>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-2.el7 will be installed
>>> --> Processing Dependency: bacula-libs for package:
>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>> --> Processing Dependency: perl(Logwatch) for package:
>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>> bacula-postgresql-9.0.8-2.el7.x86_64
>>> --> Running transaction check
>>> ---> Package bacula-libs.x86_64 0:9.0.8-2.el7 will be installed
>>> ---> Package bacula-mysql.x86_64 0:9.0.8-2.el7 will be installed
>>> --> Processing Dependency: mysql for package:
>>> bacula-mysql-9.0.8-2.el7.x86_64
>>> --> Running transaction check
>>> ---> Package mariadb.x86_64 1:5.5.56-2.el7 will be installed
>>>
>>> --> Finished Dependency Resolution
>>>
>>> Dependencies Resolved
>>>
>>> ============================================================
>>> ============================================================
>>> =========================================================
>>> Package
>>> Arch Version
>>> Repository Size
>>> ============================================================
>>> ============================================================
>>> =========================================================
>>> Installing:
>>> bacula-postgresql
>>> x86_64 9.0.8-2.el7
>>> Bacula-Community 3.0 M
>>> Installing for dependencies:
>>> bacula-libs
>>> x86_64 9.0.8-2.el7
>>> Bacula-Community 772 k
>>> bacula-mysql
>>> x86_64 9.0.8-2.el7
>>> Bacula-Community 3.0 M
>>> mariadb
>>> x86_64 1:5.5.56-2.el7
>>> base 8.7 M
>>>
>>> Transaction Summary
>>> ============================================================
>>> ============================================================
>>> =========================================================
>>> Install 1 Package (+3 Dependent packages)
>>>
>>> Total size: 16 M
>>> Total download size: 6.8 M
>>> Installed size: 74 M
>>>
>>> Is this ok [y/d/N]: y
>>> Downloading packages:
>>> Delta RPMs disabled because /usr/bin/applydeltarpm not installed.
>>> bacula-libs-9.0.8-2.el7.x86_64 FAILED
>>> http://bacula.org/packages/xxxxxxxxxxx/rpms/9.0.8/el7/
>>> x86_64/bacula-libs-9.0.8-2.el7.x86_64.rpm: [Errno 14] HTTP Error 416 -
>>> Requested Range Not Satisfiable 0 B --:--:-- ETA
>>> Trying other mirror.
>>> bacula-mysql-9.0.8-2.el7.x86_6 FAILED
>>> http://bacula.org/packages/xxxxxxxxxxxxxxxxxxx/rpms/9.0.
>>> 8/el7/x86_64/bacula-mysql-9.0.8-2.el7.x86_64.rpm: [Errno 14] HTTP Error
>>> 416 - Requested Range Not Satisfiable0 B --:--:-- ETA
>>> Trying other mirror.
>>> bacula-postgresql-9.0.8-2.el7. FAILED
>>> http://bacula.org/packages/xxxxxxxxxxxxxxxxxxxxxx/rpms/9.
>>> 0.8/el7/x86_64/bacula-postgresql-9.0.8-2.el7.x86_64.rpm: [Errno 14]
>>> HTTP Error 416 - Requested Range Not Satisfiable--:--:-- ETA
>>> Trying other mirror.
>>>
>>>
>>> Error downloading packages:
>>> bacula-mysql-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to try.
>>> bacula-libs-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to try.
>>> bacula-postgresql-9.0.8-2.el7.x86_64: [Errno 256] No more mirrors to
>>> try.
>>>
>>>
>>>
>>>
>>> Le 27/06/2018 à 09:35, Davide Franco a écrit :
>>>
>>> Hello,
>>>
>>> The MySQL dependency problem on bacula-postgresql rpm package has been
>>> fixed now.
>>>
>>> rpm binary packages for rhel7-64 (compatible with Centos 7) are now
>>> available in Bacula repository.
>>> The package name is bacula-postgresql-9.0.8-2.el7
>>>
>>> More rpm based distro packages will be uploaded within the next few days.
>>>
>>> You might need to update your local repo by running this command
>>>
>>> $ sudo yum check-update
>>>
>>> Please note also that the baseurl for rhel7 repository should be as below
>>>
>>> baseurl=http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/
>>> rpms/9.0.8/el7/x86_64
>>> instead of
>>> baseurl=http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/rpms/9.0.8/el7
>>>
>>> The manual should be fixed accordingly.
>>>
>>> Hope it helps
>>>
>>> Best regards
>>>
>>> Davide
>>>
>>> On Tue, Jun 19, 2018 at 2:11 PM, Olivier Delestre <
>>> olivier.deles...@univ-rouen.fr> wrote:
>>>
>>>> Hi, i have some problem to install bacula 9.0.8 on CentOs 7.5 x64.
>>>> I Want a PostgreSql but when i run the install command, see the result
>>>> below.
>>>>
>>>> Why i have a bacula-mysql dependency ?? ( no gpg check for the moment )
>>>> a problem with the Rpm ??
>>>>
>>>> Thanks for your help.
>>>> ---
>>>>
>>>> bacula.repo :
>>>> [Bacula-Community]
>>>> name=CentOS - Bacula - Community
>>>> baseurl=http://www.bacula.org/packages/xxxxxxxxxxxxxxxxx/
>>>> rpms/9.0.8/el7/
>>>> enabled=1
>>>> protect=0
>>>> gpgcheck=0
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> yum install bacula-postgresql
>>>> Loaded plugins: etckeeper, fastestmirror
>>>> Loading mirror speeds from cached hostfile
>>>> * epel: mirrors.ircam.fr
>>>> Resolving Dependencies
>>>> --> Running transaction check
>>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-1.el7 will be installed
>>>> --> Processing Dependency: bacula-libs for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: perl(Logwatch) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbaccats-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Running transaction check
>>>> ---> Package bacula-libs.x86_64 0:9.0.8-1.el7 will be installed
>>>> ---> Package bacula-mysql.x86_64 0:9.0.8-1.el7 will be installed
>>>> --> Finished Dependency Resolution
>>>>
>>>> Dependencies Resolved
>>>>
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Package
>>>> Arch Version
>>>> Repository Size
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Installing:
>>>> bacula-postgresql
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 3.0 M
>>>> Installing for dependencies:
>>>> bacula-libs
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 772 k
>>>> bacula-mysql
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 3.0 M
>>>>
>>>> Transaction Summary
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Install 1 Package (+2 Dependent packages)
>>>>
>>>> Total size: 6.8 M
>>>> Total download size: 3.8 M
>>>> Installed size: 26 M
>>>> Is this ok [y/d/N]: n
>>>> Exiting on user command
>>>> Your transaction was saved, rerun it with:
>>>> yum load-transaction /tmp/yum_save_tx.2018-06-19.13-59.UcII_r.yumtx
>>>> [root@sambourg etc]# yum install bacula-postgresql
>>>> Loaded plugins: etckeeper, fastestmirror
>>>> Loading mirror speeds from cached hostfile
>>>> * epel: mirrors.ircam.fr
>>>> Resolving Dependencies
>>>> --> Running transaction check
>>>> ---> Package bacula-postgresql.x86_64 0:9.0.8-1.el7 will be installed
>>>> --> Processing Dependency: bacula-libs for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: perl(Logwatch) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbac-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbaccfg-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbacfind-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Processing Dependency: libbaccats-9.0.8.so()(64bit) for package:
>>>> bacula-postgresql-9.0.8-1.el7.x86_64
>>>> --> Running transaction check
>>>> ---> Package bacula-libs.x86_64 0:9.0.8-1.el7 will be installed
>>>> ---> Package bacula-mysql.x86_64 0:9.0.8-1.el7 will be installed
>>>> --> Finished Dependency Resolution
>>>>
>>>> Dependencies Resolved
>>>>
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Package
>>>> Arch Version
>>>> Repository Size
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Installing:
>>>> bacula-postgresql
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 3.0 M
>>>> Installing for dependencies:
>>>> bacula-libs
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 772 k
>>>> bacula-mysql
>>>> x86_64 9.0.8-1.el7
>>>> Bacula-Community 3.0 M
>>>>
>>>> Transaction Summary
>>>> ============================================================
>>>> ============================================================
>>>> =========================================================
>>>> Install 1 Package (+2 Dependent packages)
>>>>
>>>> Total size: 6.8 M
>>>> Total download size: 3.8 M
>>>> Installed size: 26 M
>>>> Is this ok [y/d/N]: y
>>>> Downloading packages:
>>>> (1/2): bacula-libs-9.0.8-1.el7.x86_64.rpm
>>>>
>>>> | 772 kB 00:00:00
>>>> (2/2): bacula-mysql-9.0.8-1.el7.x86_64.rpm
>>>>
>>>> | 3.0 MB 00:00:00
>>>> ------------------------------------------------------------
>>>> ------------------------------------------------------------
>>>> ---------------------------------------------------------
>>>> Total
>>>>
>>>> 6.7 MB/s | 3.8 MB 00:00:00
>>>> Running transaction check
>>>> Running transaction test
>>>>
>>>>
>>>> Transaction check error:
>>>> file /opt/bacula/lib64/libbaccats-9.0.8.so conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/lib64/libbacsd-9.0.8.so conflicts between attempted
>>>> installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/bacula_config conflicts between attempted
>>>> installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/create_bacula_database conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/drop_bacula_database conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/drop_bacula_tables conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/grant_bacula_privileges conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/make_bacula_tables conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/make_catalog_backup conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/make_catalog_backup.pl conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>> file /opt/bacula/scripts/update_bacula_tables conflicts between
>>>> attempted installs of bacula-postgresql-9.0.8-1.el7.x86_64 and
>>>> bacula-mysql-9.0.8-1.el7.x86_64
>>>>
>>>> Error Summary
>>>> -------------
>>>> "
>>>>
>>>>
>>>> ------------------------------------------------------------
>>>> ------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Bacula-users mailing list
>>>> Bacula-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>
>>>>
>>>
>>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______
>> _________________________________________
>> Bacula-users mailing list
>> Bacula-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
