Sending label command for Volume "TEST-04" Slot 0 ...3000 OK label. VolBytes=64512 VolABytes=0 VolType=0 Volume="TEST-04" Device="HP-ULTRIUM-LTO3-EXT2" (/dev/st1)Catalog record for Volume "TEST-04", Slot 0 successfully created.Requesting to mount HP-ULTRIUM-LTO3-EXT2 ...3902 Cannot mount Volume on Storage Device ""HP-ULTRIUM-LTO3-EXT2" (/dev/st1)" because:Read label block failed: requested Volume "" on Tape device "HP-ULTRIUM-LTO3-EXT2" (/dev/st1) is not a Bacula labeled Volume, because: ERR=block_util.c:425 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer discarded.3905 Device ""HP-ULTRIUM-LTO3-EXT2" (/dev/st1)" open but no Bacula volume is mounted.If this is not a blank tape, try unmounting and remounting the Volume.Do not forget to mount the drive!!!You have messages. ----------------------------------------------------- I have 2 Fedora 29 servers, both have been running bacula succesfully for years through many upgrades.I was asked for a new LTO-3 volume on one, and it failed as above. I assumed the tape was bad so tried another with the same result. I then tried these 2 tapes on the second server, different tape drive completely, and it fails the same way. I tested it with Testing Your Tape Drive With Bacula
| | | | | | | | | | | Testing Your Tape Drive With Bacula Testing Your Tape Drive With Bacula | | | and got this: [root@tiger bacula]# btape -c bacula-sd.conf /dev/st1Tape block granularity is 1024 bytes.btape: butil.c:290-0 Using device: "/dev/st1" for writing.btape: btape.c:478-0 open device "HP-ULTRIUM-LTO3-EXT2" (/dev/st1): OK*test === Write, rewind, and re-read test === I'm going to write 10000 records and an EOFthen write 10000 records and an EOF, then rewind,and re-read the data to verify that it is correct. This is an *essential* feature ... btape: btape.c:1161-0 Wrote 10000 blocks of 64412 bytes.btape: btape.c:612-0 Wrote 1 EOF to "HP-ULTRIUM-LTO3-EXT2" (/dev/st1)btape: btape.c:1177-0 Wrote 10000 blocks of 64412 bytes.btape: btape.c:612-0 Wrote 1 EOF to "HP-ULTRIUM-LTO3-EXT2" (/dev/st1)btape: btape.c:1219-0 Rewind OK.23-Dec 10:41 btape JobId 0: Fatal error: block_util.c:425 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer discarded.btape: btape.c:1236-0 Read block 1 failed! ERR=block_util.c:425 Volume data error at 0:0! Wanted ID: "BB02", got "". Buffer discarded. * What gives? Same failure with different tapes in different tape drives on different servers right at the same time!!?? Thanks
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
