On 01/02/2019 02:45 PM, Clark, Patti via Bacula-users wrote: > Is there a way to put a malfunctioning tape drive in an autochanger into a > service mode via commands without modifying bacula configuration files? > > > > */Patti Clark/*
Hi Patti, There is an enable/disable command to do this: * disable storage=xxxx drive=yyyy A status storage will show this drive disabled by "User command": ----8<---- Device File: "speedy_drv_0" (/path/to/device/0) is not open. Device is disabled. User command. Drive 0 is not loaded. Available Space=xxxx GB ----8<---- To enable it again: * enable storage=xxxx drive=yyyy I do not believe the disable is permanent.. ie: it will not survive an SD restart, but it should help in your situation. Hope this help. Best regards, Bill -- Bill Arlofski http://www.revpol.com/bacula -- Not responsible for anything below this line -- _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
