Still trying to figure this out... Am I reading this wrong, or it is telling me
that
it can not find the volume on the tape, or the volume in the config file?
Does anyone have a bacula-dir and bacula-sd they would like to share with a
single
tape drive that works? I have a feeling I am misconfiguring something.
Thank you.
----- Original Message -----
> From: "Robert Minvielle" <robe...@louisiana.edu>
> To: "William Muriithi" <will...@perasotech.com>
> Cc: bacula-users@lists.sourceforge.net
> Sent: Tuesday, May 7, 2019 3:31:16 PM
> Subject: Re: [Bacula-users] Autochanger not working?
>
> I labeled the tapes in bconsole, it said it worked (I ejected them and
> mounted
> them with mtx). However, I still get:
>
>
> *mount
> Automatically selected Storage: File1
> 3905 Device ""Drive-1" (/dev/nst0)" open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
> *unmount
> Automatically selected Storage: File1
> 3002 Device ""Drive-1" (/dev/nst0)" unmounted.
> *mount
> Automatically selected Storage: File1
> 3902 Cannot mount Volume on Storage Device ""Drive-1" (/dev/nst0)" because:
> Could not unserialize Volume label: ERR=label.c:873 Expecting Volume Label,
> got FI=0 Stream=0 len=64412
>
> 3905 Device ""Drive-1" (/dev/nst0)" open but no Bacula volume is mounted.
> If this is not a blank tape, try unmounting and remounting the Volume.
>
> And it still does not see the tapes. Am I using the wrong device??
>
>
>
> ----- Original Message -----
> > From: "William Muriithi" <will...@perasotech.com>
> > To: "Robert Minvielle" <robe...@louisiana.edu>,
> > bacula-users@lists.sourceforge.net
> > Sent: Tuesday, May 7, 2019 2:36:51 PM
> > Subject: Re: Autochanger not working?
> >
> > Hi Robert,
> >
> > ===========
> >
> > Autochanger {
> > Name = LTO5
> > Device = Drive-1
> > Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> > Changer Device = /dev/sg3
> > }
> > ========
> > Be aware that /dev/sg3 can change when the system is rebooted.
> >
> > ===============
> > Device {
> > Name = Drive-1
> > Drive Index = 0
> > Device Type = Tape
> > Media Type = LTO-5
> > Archive Device = /dev/nst0
> > Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> > Label Media = yes; # lets Bacula label unlabeled media
> > Random Access = Yes;
> > Automatic Mount = yes; # when device opened, read it
> > Removable Media = yes;
> > Always Open = yes;
> > Maximum Concurrent Jobs = 5
> > }
> > ==========
> >
> > Don't have "Drive Index = 0", think its only needed when your tape devices
> > have multiple drives/head
> > Use "Random Access = no" since you are using the tapes
> >
> > ============
> > Device "Drive-1" (/dev/nst0) open but no Bacula volume is currently
> > mounted.
> > Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> > Positioned at File=0 Block=0
> > ======================
> > You may not have labelled the tapes, so bacula didn't attempt loading them.
> >
> > Try manually attempting to load them from bconsole and see what happens.
> >
> > Sorry for the formatting, using a horrible mail client called outlook,
> > hence
> > the mess
> >
> > Regards,
> > William
>
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
