Hi Martin,
I just tested the umount/eject/run/mount procedure without a restart in between
- and the same happens:
*umount LTO-5HH
Automatically selected Catalog: Fritzie18-Cat
Using Catalog "Fritzie18-Cat"
3002 Device ""LTO-5" (/dev/nst0)" unmounted.
*run
A job name must be specified.
The defined Job resources are:
1: Bacula Catalog
2: Bacula Catalog Restore
3: Gruppen-LW ohne Chris LTO-5
4: ...
Select Job resource (1-10): 1
Run Backup job
JobName: Bacula Catalog
Level: Full
Client: fritzie15-fd
FileSet: Catalog
Pool: LTO-5HH-Pool (From Job resource)
Storage: LTO-5HH (From Job resource)
When: 2020-05-08 09:18:01
Priority: 11
OK to run? (yes/mod/no): yes
Job queued. JobId=12628
*mount LTO-5HH
3001 Mounted Volume: LTO-5-Tape0017
3001 Device ""LTO-5" (/dev/nst0)" is mounted with Volume "LTO-5-Tape0017"
08-Mai 09:18 fritzie15-dir JobId 12628: shell command: run BeforeJob
"/etc/bacula/make_catalog_backup bacula bacula SockenC7"
08-Mai 09:18 fritzie15-dir JobId 12628: Start Backup JobId 12628,
Job=Bacula_Catalog.2020-05-08_09.18.07_51
08-Mai 09:19 fritzie15-dir JobId 12628: Using Device "LTO-5" to write.
08-Mai 09:19 fritzie15-sd JobId 12628: Volume "LTO-5-Tape0017" previously
written, moving to end of data.
08-Mai 09:19 fritzie15-sd JobId 12628: Error: Unable to position to end of data
on Tape device "LTO-5" (/dev/nst0): ERR=tape_dev.c:363 ioctl MTIOCGET error on
"LTO-5" (/dev/nst0). ERR=Erfolg.
08-Mai 09:19 fritzie15-sd JobId 12628: Marking Volume "LTO-5-Tape0017" in Error
in Catalog
So it seems not to be connected to a reset of the device.
Thank you very much for your kind assistance,
Christian
-----Original-Nachricht-----
Betreff: Re: [Bacula-users] Tape Moving Error after server restart
Datum: 2020-05-08T07:05:36+0200
Von: "Christian Lehmann" <[email protected]>
An: "Martin Simmons" <[email protected]>
Dear Martin,
I am sorry for answering so late, but due to the COVID-19/Sars-CoV2 situation I
had a lot of other issues to solve.
During the restart no backup was running - just the tape was positioned in the
middle of the tape.
I will test the unmounr/eject/mount procedure without a reboot today and report
the results.
Best,
Christian
-----Original-Nachricht-----
Betreff: Re: [Bacula-users] Tape Moving Error after server restart
Datum: 2020-03-20T16:19:57+0100
Von: "Martin Simmons" <[email protected]>
An: "Christian Lehmann" <[email protected]>
Did the restart happen in the middle of a backup?
Does the backup error occur after you unmount the tape from bconole, eject it
and then insert and mount it again, without rebooting?
__Martin
>>>>> On Wed, 18 Mar 2020 13:52:09 +0100 (CET), Christian Lehmann said:
>
> Dear all,
>
> from time to time I get an error after I restart the server running my
> bacula director and also a storage daemon with an Tandberg LTO-5 HH.
>
> The current bacula version is 9.6.3 (9th March 2020) on a Debian machine.
>
> The situation is:
>
> Bacula has made some backups to a tape in the drive, but the tape isn't
> full yet.
>
> Than a restart of the machine is happing (for example due to a Kernel
> update). So bacula is shutting down and the tape is rewinded.
>
> After restart, as soon as I initiate a backup job, bacula tries the
> positioning to the end of the tape to write the data (in this case I just
> run a small backup job of my bacula database).
>
> However, he fails to do so, with the error "ERFOLG" (which is German and
> means SUCCESS). So I do not understand what is happening there. Has someone
> come accross such a behaviour?
>
> 18-Mär 13:19 fritzie15-dir JobId 12352: shell command: run BeforeJob
> "/etc/bacula/make_catalog_backup bacula bacula VERY_SAFE_PASSWORD_XXX"
> 18-Mär 13:19 fritzie15-dir JobId 12352: Start Backup JobId 12352,
> Job=Bacula_Catalog.2020-03-18_13.19.09_03
> 18-Mär 13:19 fritzie15-dir JobId 12352: Using Device "LTO-5" to write.
> 18-Mär 13:19 fritzie15-sd JobId 12352: Volume "LTO-5-Tape0027" previously
> written, moving to end of data.
> 18-Mär 13:20 fritzie15-sd JobId 12352: Error: Unable to position to end of
> data on Tape device "LTO-5" (/dev/nst0): ERR=tape_dev.c:363 ioctl MTIOCGET
> error on "LTO-5" (/dev/nst0). ERR=Erfolg.
> 18-Mär 13:20 fritzie15-sd JobId 12352: Marking Volume "LTO-5-Tape0027" in
> Error in Catalog.
>
> Now, I am a bit afraid, because I do not know, if a restore of the backuped
> data would work.
>
> Thank you all in advance!
>
> Best,
>
> Christian
>
>
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
