Thank you Bill, your help was on spot - it works.
> On 17. Mar 2022, at 06:18, Bill Arlofski via Bacula-users
> <bacula-users@lists.sourceforge.net> wrote:
>
> On 3/16/22 14:55, Justin Case wrote:
>
> Hello Justin,
>
> I suspected it could be possible that the "RunsOnSuccess = no" - which makes
> no sense in a "Before" RunScript - might be
> causing this issue:
>
>> Runscript {
>> RunsWhen = "Before"
>> RunsOnSuccess = no <--- Here
>> RunsOnClient = no
>> Command = "/opt/bacula/scripts/make_catalog_backup.pl MyCatalog"
>> }
>
> I just tested in my 11.0.5 environment, and this is indeed your problem!
>
> So, I would consider this to be a bug, albeit one that is quite the corner
> case. :)
>
> Just remove that line, reload your config and you should be all set.
>
>
> Best regards,
> Bill
>
> --
> Bill Arlofski
> w...@protonmail.com
>
>
>
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
