Ok sorry for this thread. The problem (which wasn't) is solved . All the options for positioning and reading volume file properly were disabled. It works well now, like before.
I feel better and still think Bacula is a great project and really powerfull tool for the reliability of the data. Thank Martin to remind me where to start finding the solution. And I want to say too that the documentation is really well written ! all is in the doc (tools and main) . Nice job Kern Sibbald and your dev team. -----Message d'origine----- De : Lionel PLASSE <[email protected]> Envoyé : mercredi 13 avril 2022 17:46 À : [email protected] Objet : Re: [Bacula-users] Restoration stuck with bconsole - bextract or baculum wizard oK the HardwareEndOfFile: HardwareEndOfMedium: BackwardSpaceRecord: BackwardSpaceFile: BsfAtEom: ForwardSpaceRecord: ForwardSpaceFile: FastForwardSpaceFile: BlockPositioning: BlockChecksum: UseMtiocGet: Were all unmarked on the device configuration. I don't know why nor who ( ^^ ) done this ... I willl test with those options activated and check if it is better now... -----Message d'origine----- De : Lionel PLASSE <[email protected]> Envoyé : mercredi 13 avril 2022 17:32 À : [email protected] Cc : Martin Simmons <[email protected]> Objet : Re: [Bacula-users] Restoration stuck with bconsole - bextract or baculum wizard Why my bootstrap file does not figure out the VolFile and VolBlock directive.? Why the restore command read now my Volume sequentialy bock afeter block? I thought It was possible to position much more faster to the right block address on the file volume. Maybe I have modified the configuration of my device ressource. It's like it must now read block after block to find the good files to restore. Or the bootstrop file is not generated properly and some informations are missing; Something went wrong; the volume is a usb disk with a file volume ... -----Message d'origine----- De : Lionel PLASSE <[email protected]> Envoyé : mercredi 13 avril 2022 14:09 À : Martin Simmons <[email protected]> Cc : [email protected] Objet : Re: [Bacula-users] Restoration stuck with bconsole - bextract or baculum wizard Yes, It's what I thought, because I do the same test with the FULL2 volume, and the same appears. I'm now running a bls -k since this morning (France) and it's still running and now listing the address 367136933614 , 4 hours later, maybe I just need to wait the voladdr 1295408902248 , but's so slow ! My bsr for the Full2 I am testing this time # 05-févr.-2022 07:07:13 - Backup_Serv_dc_01_SYS.2022-02-04_20.30.00_37 - Full Volume="FULL2" MediaType="USB" VolSessionId=248 VolSessionTime=1642266413 VolAddr=1295408902248-1314271625530 FileIndex=1-192133 Really strange, the backup size is not much more important than before, and it was not so difficult to achieve the voladdress. PLASSE Lionel | Administrateur systŠmes et r‚seaux 221 All‚e de F‚tan 01600 TREVOUX | Plan d'accŠs Tel : 04.37.49.91.39 [email protected] www.cofiem.fr | www.cofiem-robotics.fr -----Message d'origine----- De : Martin Simmons <[email protected]> Envoyé : mercredi 13 avril 2022 12:55 À : Lionel PLASSE <[email protected]> Cc : [email protected] Objet : Re: [Bacula-users] Restoration stuck with bconsole - bextract or baculum wizard Maybe it is just running very slowly? Can you post the bsr file here? __Martin >>>>> On Wed, 13 Apr 2022 08:48:35 +0000, Lionel PLASSE said: > > Hello, > > I was testing my Backup support (every 3month I test it). And was surprised > for one backup job only on the same volume is stuck. > I explain, when I restore the other data server all is right. And Every time > for one job a can not restore, it blocks on the "Ready to read from volume" > message . > > I have a good bsr file. I can list file in the backup job result. But can't > read volume for this job. > > So I supress the volume (logicaly and physicaly) recreate it, relabel and > redo the full backup job. The same problem appears. > The bls command block too. > Before It was good, and I was happy to test my full restoration of windows > 2012R2 c: server ! Why now it blocks? > > Ex: > > bextract -b /BKP/bacubak/SERV_DC_01-fd-SYS.bsr -c > /etc/bacula/bacula-sd.conf -v -V FULL1 BACKUP /RESTAURATIONS-BACULA/ > bextract: butil.c:292-0 Using device: "BACKUP" for reading. > 13-avril 10:26 bextract JobId 0: Ready to read from volume "FULL1" on File > device "BACKUP" (/BKP/bacubak). > > > Can provide more info if needed to help me Bacula 9.6.6.3 with mysql > (volume file support) And I just have seen that bextract is still in > 9.4.2 version! > > Thanks for reading > > > > PLASSE Lionel | Administrateur systèmes et réseaux > 221 Allée de Fétan > 01600 TREVOUX | > https://www.google.fr/maps/place/221+Allée+de+Fétan,+01600+Trévoux/@45 > .9445028,4.7581844,17z/data=!4m13!1m7!3m6!1s0x47f4906e98463259:0x32e33 > a7755284538!2zMjEyIEFsbMOpZSBkZSBGw6l0YW4sIDAxNjAwIFRyw6l2b3V4!3b1!8m2 > !3d45.9444281!4d4.7578088!3m4!1s0x47f4906e98463259:0x32e33a7755284538! > 8m2!3d45.9444281!4d4.7578088?hl=fr > Tel : 04.37.49.91.39 > mailto:[email protected] > https://www.cofiem.fr/ | https://www.cofiem-robotics.fr/ > > > > > > > > _______________________________________________ > Bacula-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/bacula-users > _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
