Hi Gary,
I know what you mean by "hijacking a thread" now.
I was reading that message when I decided to post my question from the
same window.
Today I cleared the tape drive with an official cleaning cartridge but
it made no difference to the error:
-------------------------------------------------------------------------
sg_raw -o - -r 1024 -t 60 -v /dev/sg1 8c 00 00 00 00 00 00 00 00 00 00
00 04 00 00 00
cdb to send: [8c 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00]
SCSI Status: Check Condition
Sense Information:
Fixed format, current; Sense key: Illegal Request
Additional sense: Invalid command operation code
Raw sense data (in hex), sb_len=21, embedded_len=21
70 00 05 00 00 00 00 0d 00 00 00 00 20 00 00 00
00 00 00 00 00
Error 9 occurred, no data received
Illegal request, Invalid opcode
-------------------------------------------------------------------------
If it was some kind of a hardware fault I should be seeing other
problems, shouldn't I?
All backups and Bacula scripts keep completing without errors, it's just
this one command that fails.
I've even run a big restore as a test and it all looks perfectly fine.
I don't have any spare hardware try different configuration.
Is there anything else to try to determine the root cause?
Why would a reboot alone trigger it?
Regards,
Adam
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
