Hi. The job has finished. OK but I have the following questions: 1) The complete Full weighs 2.4TB (job older)
2) the job when it was paused, had 1.6TB 3) the job upon resuming ends OK, but indicates that it copied 800GB 4) If I add the result of the copy (1.6TB + 800Gb), it gives me 2.4 TB, it seems like everything is fine. However, the result of the job confuses me. which leaves the total being 800Gb and not the total sum of 2.4 TB. +---------+-----------------+---------------------+------+-------+-----------+-----------------+-----------+ | jobid | name | starttime | type | level | jobfiles | jobbytes | jobstatus | +---------+-----------------+---------------------+------+-------+-----------+-----------------+-----------+ | 154,432 | sve0000-071-job | 2024-11-25 15:33:34 | B | F | 2,579,122 | 866,453,394,958 | T | +---------+-----------------+---------------------+------+-------+-----------+-----------------+-----------+ Perhaps this can be an issue for improvement in the development of Bacula that shows the total of the work and not just the total of the resumption. LOG: srvlnxbacula-dir JobId 154432: Start Backup JobId 154432, Job=sve0000-071-job.2024-11-24_01.00.00_18 srvlnxbacula-dir JobId 154432: Connected to Storage "MSL3040" at 10.0.0.190:9103 with TLS srvlnxbacula-sd JobId 154432: 3307 Issuing autochanger "unload Volume DBP084L7, Slot 37, Drive 0" command. srvlnxbacula-dir JobId 154432: Using Device "DRIVE0" to write. srvlnxbacula-dir JobId 154432: Connected to Client "sve0000-071-fd" at 10.0.0.71:9102 with TLS srvlnxbacula-sd JobId 154432: 3304 Issuing autochanger "load Volume DBP082L7, Slot 36, Drive 0" command. srvlnxbacula-sd JobId 154432: 3305 Autochanger "load Volume DBP082L7, Slot 36, Drive 0", status is OK. srvlnxbacula-sd JobId 154432: Volume "DBP082L7" previously written, moving to end of data. srvlnxbacula-sd JobId 154432: Ready to append to end of Volume "DBP082L7" at file=10742. sve0000-071-fd JobId 154432: Error: lib/bsock.c:283 Bsock send while terminated=1 on call to Storage daemon:10.0.0.190:9103 sve0000-071-fd JobId 154432: Fatal error: filed/backup.c:912 Network send error to SD. ERR=I/O Error sve0000-071-fd JobId 154432: Error: lib/bsock.c:283 Bsock send while terminated=1 on call to Storage daemon:10.0.0.190:9103 srvlnxbacula-sd JobId 154432: Fatal error: append.c:326 Network error reading from FD. ERR=Resource temporarily unavailable srvlnxbacula-sd JobId 154432: Elapsed time=31:18:45, Transfer rate=14.82 M Bytes/second srvlnxbacula-sd JobId 154432: Sending spooled attrs to the Director. Despooling 769,313,608 bytes ... srvlnxbacula-dir JobId 154432: Bacula srvlnxbacula-dir 15.0.2 (21Mar24): Build OS: x86_64-pc-linux-gnu-bacula debian 11.8 JobId: 154432 Job: sve0000-071-job.2024-11-24_01.00.00_18 Backup Level: Full Client: "sve0000-071-fd" 11.0.5 (03Jun21) Microsoft Windows Server 2008 Service Pack 2 (build 6002), 64-bit,Cross-compile,Win64 FileSet: "sve0000-071-fs" 2024-09-09 10:48:25 Pool: "FS_MSL_FULL_MENSUAL" (From Run Pool override) Catalog: "MyCatalog" (From Client resource) Storage: "MSL3040" (From Pool resource) Scheduled time: 24-Nov-2024 01:00:00 Start time: 24-Nov-2024 02:17:35 End time: 25-Nov-2024 09:39:21 Elapsed time: 1 day 7 hours 21 mins 46 secs Priority: 10 FD Files Written: 1,821,117 SD Files Written: 1,821,117 FD Bytes Written: 1,670,835,016,234 (1.670 TB) SD Bytes Written: 1,671,405,670,319 (1.671 TB) Rate: 14798.5 KB/s Software Compression: None Comm Line Compression: None Snapshot/VSS: no Encryption: no Accurate: no Volume name(s): DBP082L7 Volume Session Id: 271 Volume Session Time: 1732201489 Last Volume Bytes: 12,401,939,386,368 (12.40 TB) Non-fatal FD errors: 2 SD Errors: 1 FD termination status: Incomplete job SD termination status: Incomplete job Termination: Backup failed -- Incomplete srvlnxbacula-dir JobId 154432: Restart Incomplete Backup JobId 154432, Job=sve0000-071-job.2024-11-24_01.00.00_18 srvlnxbacula-dir JobId 154432: Found 1821115 files from prior incomplete Job. srvlnxbacula-dir JobId 154432: Connected to Storage "MSL3040" at 10.0.0.190:9103 with TLS srvlnxbacula-sd JobId 154432: 3307 Issuing autochanger "unload Volume DBP084L7, Slot 37, Drive 0" command. srvlnxbacula-dir JobId 154432: Using Device "DRIVE0" to write. srvlnxbacula-dir JobId 154432: Connected to Client "sve0000-071-fd" at 10.0.0.71:9102 with TLS srvlnxbacula-dir JobId 154432: Sending Accurate information to the FD. srvlnxbacula-sd JobId 154432: 3304 Issuing autochanger "load Volume DBP082L7, Slot 36, Drive 0" command. srvlnxbacula-sd JobId 154432: 3305 Autochanger "load Volume DBP082L7, Slot 36, Drive 0", status is OK. srvlnxbacula-sd JobId 154432: Volume "DBP082L7" previously written, moving to end of data. srvlnxbacula-sd JobId 154432: Ready to append to end of Volume "DBP082L7" at file=12416. sve0000-071-fd JobId 154432: Space saved with Base jobs: 1589476 MB srvlnxbacula-sd JobId 154432: Elapsed time=18:45:19, Transfer rate=12.83 M Bytes/second srvlnxbacula-sd JobId 154432: Sending spooled attrs to the Director. Despooling 317,374,291 bytes ... srvlnxbacula-dir JobId 154432: Bacula srvlnxbacula-dir 15.0.2 (21Mar24): Build OS: x86_64-pc-linux-gnu-bacula debian 11.8 JobId: 154432 Job: sve0000-071-job.2024-11-24_01.00.00_18 Backup Level: Full Client: "sve0000-071-fd" 11.0.5 (03Jun21) Microsoft Windows Server 2008 Service Pack 2 (build 6002), 64-bit,Cross-compile,Win64 FileSet: "sve0000-071-fs" 2024-09-09 10:48:25 Pool: "FS_MSL_FULL_MENSUAL" (From Command input) Catalog: "MyCatalog" (From Client resource) Storage: "MSL3040" (From Pool resource) Scheduled time: 24-Nov-2024 01:00:00 Start time: 25-Nov-2024 15:33:34 End time: 26-Nov-2024 10:22:57 Elapsed time: 18 hours 49 mins 23 secs Priority: 10 FD Files Written: 2,579,122 SD Files Written: 2,579,122 FD Bytes Written: 866,453,394,958 (866.4 GB) SD Bytes Written: 866,688,255,507 (866.6 GB) Rate: 12786.5 KB/s Software Compression: None Comm Line Compression: 26.0% 1.4:1 Snapshot/VSS: no Encryption: no Accurate: no Volume name(s): DBP082L7 Volume Session Id: 271 Volume Session Time: 1732201489 Last Volume Bytes: 13,269,400,187,904 (13.26 TB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK srvlnxbacula-dir JobId 154432: Begin pruning Jobs older than 1 year . srvlnxbacula-dir JobId 154432: No Jobs found to prune. srvlnxbacula-dir JobId 154432: Begin pruning Files. srvlnxbacula-dir JobId 154432: No Files found to prune. srvlnxbacula-dir JobId 154432: End auto prune. On Mon, Nov 25, 2024 at 8:10 PM Jose Alberto <j.se...@gmail.com> wrote: > thanks for the response. I understood better. > > On Mon, Nov 25, 2024 at 7:29 PM Bill Arlofski via Bacula-users < > bacula-users@lists.sourceforge.net> wrote: > >> On 11/25/24 3:49 PM, Jose Alberto wrote: >> > Hello. Bacula 15.0.2 Debian 11. >> > >> > I have a full Job that weighs 2.4TB. When I was going for 1.6 I >> executed "stop" in bconsole. >> > >> > Then run resume (but I have doubts if "restart" was ideal). But it >> seems like it was starting from 0 and not from the 1.6TB >> > it had, >> >> Hello Jose, >> >> What you have show from the current logs looks perfectly fine. >> >> >> JobID: 154432 terminates Incomplete: >> ----8<---- >> Termination: Backup failed -- Incomplete >> ----8<---- >> >> >> Then, when restarted, it shows that it is restarting the incomplete >> Backup (same) JobID 154432, and that it knows about the >> 1,821,115 files that were backed up before the job was stopped: >> ----8<---- >> srvlnxbacula-dir JobId 154432: Restart Incomplete Backup JobId 154432, >> Job=sve0000-071-job.2024-11-24_01.00.00_18 >> srvlnxbacula-dir JobId 154432: Found 1821115 files from prior incomplete >> Job. >> ----8<---- >> >> >> And then it continues where it left off as if it work working on a normal >> backup job: >> ----8<---- >> srvlnxbacula-dir JobId 154432: Connected to Storage "MSL3040" at >> 10.0.0.190:9103 with TLS >> srvlnxbacula-sd JobId 154432: 3307 Issuing autochanger "unload Volume >> DBP084L7, Slot 37, Drive 0" command. >> srvlnxbacula-dir JobId 154432: Using Device "DRIVE0" to write. >> srvlnxbacula-dir JobId 154432: Connected to Client "sve0000-071-fd" at >> 10.0.0.71:9102 with TLS >> srvlnxbacula-dir JobId 154432: Sending Accurate information to the FD. >> ----8<---- >> >> >> > If start from 0. There is no point in running stop and then resume. or >> I'm wrong. >> >> As you can see from above, it does not start that 0. It is possible that >> a `status client` or a `status storage` may not >> indicate the full amount of files/bytes when a job is resumed, but the >> end result in the job summary, and the data actually >> backed up is correct. >> >> >> > Difference between resume and restart? >> >> They are the same. >> >> For the `resume` command, the manual states: >> ----8<---- >> *resume* >> >> The resume command does exactly the same thing as a restart command, but >> for some users the name may be more logical because >> in general the restart command is used to resume running a Job that was >> incomplete. >> ----8<---- >> >> >> Hope this helps, >> Bill >> >> -- >> Bill Arlofski >> w...@protonmail.com >> _______________________________________________ >> Bacula-users mailing list >> Bacula-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/bacula-users >> > > > -- > ############################# > # Sistema Operativo: Debian # > # Caracas, Venezuela # > ############################# > -- ############################# # Sistema Operativo: Debian # # Caracas, Venezuela # #############################
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
