Hi Bruno,

Am 08.12.2025 um 10:55 schrieb Bruno Bartels (Intero Technologies) via Bacula-users:
Hi all,
since an Upgrade to Debian 13 we have sometimes error with backups that are written so SMB/CIFS-volumes.
In the logs there is written:

$my-sd JobId 4437: Error: Error closing volume "Vol-0412" device 
"FileChgrEXT-Dev1" (/mnt/backup02/backup_1). ERR=Out of memory.
$my-sd JobId 4437: End of medium on Volume "Vol-0412" Bytes=53,687,067,919 
Blocks=832,203 at 08-Dec-2025 01:48.

you will have to investigate what conditions can cause the CIFS module to create such an error.

I *suspect* it's not actually writing but the close() system call. I am not really a big user of CIFS, though, so I have no idea where I would start searching or asking.

ENOMEM is a pretty generic error and not documented in close(2), fclose(3) or write(2) in the documentation I have in front of me.

There is plenty of space on the destination volume, also there is enough RAM on the system.

You might want to try strace'ing the FD to see if anything interesting happens, but I guess that, eventually, you'll find that the cause is in the CIFS part of the picture.

I would also advise to check if volumes are properly written, which you can do with a restore, a verify job, or even a bls run.

My Setup is with Bacula V 15.0.2 in Docker containers on Debian 13.

Container deployments are not well standardized with Bacula, I think, and last I did look into those things, network mounts were particularly tricky.

Hopefully you'll find the cause and can share an explanation or solution.

Cheers,

Arno

Never had theses issues before. My SMB-Mountpoints are both on volumes in LAN and also on external storage drives at Hetzner.

Can sb help please?



_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

--
Arno Lehmann

IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück



_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
  • [Bacula-users] Issues... Bruno Bartels (Intero Technologies) via Bacula-users
    • Re: [Bacula-user... Arno Lehmann via Bacula-users

Reply via email to