Hello Abdulaziz,

On 11/10/26 09:29, Abdulaziz Al Ahmad wrote:
Hi everyone,

I am running Bacula 15.0.3 (Community) on Ubuntu 24.04 using the Cloud storage 
device with Driver = Amazon(aws_cloud_driver) against an S3-compatible endpoint 
(GleSYS S3).

I am experiencing an intermittent issue (1-2% failure rate) where larger volume 
parts (~1 GB part.2 files) fail to upload during a backup job. For example, 
during a ~2.5 TB backup job for client2 (~2,500 1 GB volumes), 29 volumes 
failed to upload their part.2 file.

When this happens, Bacula logs "retry=1/10 and msg= Child exited with code 1", 
but immediately sets state=done on the part and moves on without attempting retries 2 
through 10.

This line means that the upload was successful after 1 retry. The command AWS
had an error the first time and was OK the second time.

Bacula is not dealing with the AWS protocol itself, it uses the aws command
for that. If you want to know why the AWS command cannot upload the file
correctly on your S3 box, you need to try on command line, enable logs on
the AWS command, look the logs on your box, it's outside of Bacula. We use
basically "aws s3 copy" and we pipe the data to the command to control the
bandwidth and have statistics.

Hope it helps!

Best Regards,
Eric


_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to