Hi Ken,

Am 12.11.2026 um 21:46 schrieb kjohnson--- via Bacula-users:
Our backups are configured so that each run uses its own cartridge;
tomorrow's backup is never appended to today's.  We have daily, monthly, and
off-site pools.

A numbers of times I have seen the backup job stall on or before the first
write to the mounted tape.  It doesn't fail, but it does not progress.
Twice now I have been able to resolve this situation by deleting that volume
from the pool, writing an EOF to the start of the tape, and then relabeling
the tape with the same name in the same pool.  Starting the backup again on
that same tape works exactly as it should.

Fuji tapes, HP drive.

Does this set of symptoms suggest anything that might help me figure this
out and make it stop?


Nothing obvious.

What I propose is the following: First, describe which exact version of Bacula you run -- not just the version number, but also where it comes from. Linux distros have different build settings thatn what Bacula Systems provides, and if you build from source yourself, nobody except you can know exactly what you run.

Observe and record the status of Director, File Daemon and Storage Daemon during those situations.

Then, you can tell the SD to trace all it does using a command such as

setdebug storage=<the-storage-name> level=400 trace=1 options=t

which should then result in a trace file in the SD's working directory including time stamps. Level 400 is going to result in a lot of information.

You should familiarize yourself with this, and then try to arrange capturing this sort of trace around the time jobs start.

reading those lines may already provide clues, and sharing them here might lead to someone else developing an idea.

If that doesn't lead anywhere, there's the option to run the Storage Daemon with strace attached when tracing it, which will create very detailed information but needs patience and experience to understand.


Better start with the simple steps -- it's not unlikely you'll get a recommendation to upgrade and that might already fix things :-)


Cheers,

Arno


Thanks,

Ken




_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

--
Arno Lehmann

IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück



_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

Reply via email to