Hi..

I used to have a similar problem when I had newly bought the CBZ. It used to
shift fine when I start it up and go for a short 20-30 kms ride. But any
more than that and the gear-shift used to become very hard and notchy. Later
realized that as the bike ( and so the clutch) used to warm it, it would not
disengage properly on pressing the clutch lever. Adjusting the clutch when
it was hot and showing the symptoms solved the problem. It was perhaps bcoz
the bike was new and the clutch plates had probably not adjustted properly.
Never experienced the problem again.

Check if your bike tends to move forward in gear with clutch lever fully
pressed when you experience notchy gearshift - it might indicate the same
problem.

Ride Safe...

Aneesh

On Sat, Jul 12, 2008 at 10:01 AM, Venkat Shyam <[EMAIL PROTECTED]> wrote:

> clutch not releasing fully when the lever is depressed fully!!
>
>
Vince Lombardi  - "Winning is habit. Unfortunately, so is losing."


[Non-text portions of this message have been removed]

Reply via email to