Hi Techies, Got my bike serviced some days back at Reddy with a long list of replaced parts. After the bike was serviced, I took it for a spin and found that between 4k-5k rpm the bike used to jerk (similar feeling when the bike runs out of fuel). He removed the coil cleaned it thoroughly and put it back. Though the problem went off after this, the same thing started when picking up, but was very marginal. Reddy said that it was due to water in the coil and will get back to normal once the water vapourises. Now this issue has just elevated- the engine suddenly runs out of breath at any speed, will jerk for a few seconds and get back to life again. At times it feels scary as the deccerelation is very quick- feels like a vehicle tail-gating might just bang into me :( Worse is in stop and go traffic, the engines down and doesnt start at all (with hordes of vehicles behind me honking their guts out) unless I use the choke and give it a redline whack. Doesnt work always and I end up riding through traffic with the choke on.
The second issue is with the RPM reading. It is always 700-1000 mark above the normal. Earlier 60 kph in 5th gear used to be around 4100-4200 rpm and now it shows 5000 and the error rises with increase in speed. Will be going back to him for a fix- but any idea of why this happens and a DIY solution? Arpan, Venkat Sir suggestions pls. Regards, Deepak
