On 8/1/06, I Md Yanuarta DPY <[EMAIL PROTECTED]> wrote:
> On 7/31/06, made donal <[EMAIL PROTECTED]> wrote:
> >
> > hallo rekan2 master linux, saya sempat baca2 di
> > internet tentang squidnya. namun saya menemukan
> > kendala. ini apa sih maksudnya?????
> > maximum_object_size 256 KB
>
> *Description*
>
> Objects larger than this size will NOT be saved on disk. The value is
> specified in kilobytes, and the default is 4 MB. If you wish to get a high
> BYTES hit ratio, you should probably increase this (one 32 MB object hit
> counts for 3200 10 KB hits). If you wish to increase speed more than your
> want to save bandwidth, you should leave this low. During the initial
> downloading of a file, the downloading time seems to be a normal one, but if
> you download the same file again, the time it takes for download will be
> very minimum. This indicates that, the file comes from the Cache.
>
> cache_dir ufs /var/spool/squid 100 16 256
>
> *Usage*
>
> cache_dir Type Maxobjsize Directory-Name Mbytes Level-1 Level2 [..]
> DISKD :
> cache_dir diskd Maxobjsize Directory-Name MB L1 L2 Q1 Q2
>
> *Description*
>
> Type specifies the kind of storage system to use. Most everyone will want to
> use "ufs" as the type. If you are using Async I/O (--enable async-io) on
> Linux or Solaris, then you may want to try "aufs" as the type. Async IO
> support may be buggy, however, so beware.
>
> Maxobjsize refers to the max object size this storedir supports. It is used
> to initially choose the storedir to dump the object. -1 means 'any size'.
>
> 'Directory' is a top-level directory where cache swap files will be stored.
> If you want to use an entire disk for caching, then this can be the
> mount-point directory. The directory must exist and be writable by the Squid
> process. Squid will NOT create any directory.
>
> 'Mbytes' is the amount of disk space (MB) to use under this directory.
>
> 'Level-1' is the number of first-level subdirectories, which will be created
> under the 'Directory'.
>
> 'Level-2' is the number of second-level subdirectories, which will be
> created under each first-level directory. To create swap directory use
> /usr/local/squid/bin/squid –z option.
>
> For the diskd type, Q1 specifies the number of unacknowledged I/O requests
> when Squid stops opening new files. If this many messages are in the queues,
> Squid won't open new files. Q2 specifies the number of unacknowledged
> messages when Squid starts blocking. If this many messages are in the
> queues, Squid blocks until it receives some replies.
> *Default* cache_dir ufs /usr/local/squid/cache 100 16 256 *Example*
> cache_dir ufs /cache1 5000 16 256
>
>
>
> memory_pools_limit 32 MB
>
> *Description*
> If set to a non-zero value, Squid will keep at most the specified limit of
> allocated (but unused) memory in memory pools. All free() requests that
> exceed this limit will be handled by your malloc library. Squid does not
> pre-allocate any memory, just safe-keeps objects that otherwise would be
> free()d. Thus, it is safe to set memory_pools_limit to a reasonably high
> value even if your configuration will use less memory.
>
> If not set (default) or set to zero, Squid will keep all memory it can. That
> is, there will be no limit on the total amount of memory used for
> safe-keeping.
>
>
> redirect_rewrites_host_header off
>
> *Description*
> By default Squid rewrites any Host: header in redirected requests. If you
> are running a accelerator then this may not be a wanted effect of a
> redirector
>
>
>
> half_closed_clients off
>
> *Description*
> Some clients may shutdown the sending side of their TCP connections, while
> leaving their receiving sides open. Sometimes, Squid cannot tell the
> difference between a half-closed
> <http://www.visolve.com/squid/squid24s1/glossary.php#timeout>and a
> fully-closed
> <http://www.visolve.com/squid/squid24s1/glossary.php#timeout>TCP connection.
> By default, half-closed client connections are kept open until a read(2) or
> write(2) on the socket returns an error. Change this option to 'off' and
> Squid will immediately close client connections when read (2) returns "no
> more data to r
>
> log_icp_queries off
>
> *Description*
> If set, ICP queries are logged to
> access.log<http://www.visolve.com/squid/squid24s1/logfiles.php#cache_access_log>.
> You may wish to disable this if your ICP load is very high to speed things
> up or to simplify log analysis
>
>
> cachemgr_passwd mypassword all
>
> *Description*
> This tag is used to specify passwords for cachemgr operations. Some valid
> actions are (see cache manager menu for a full list):
>
> 5min
> 60min
> asndb
> authenticator
> cbdata
> client_list
> comm_incoming
> config *
> counters delay
> digest_stats
> dns
> events
> filedescriptors
> fqdncache
> histograms
> http_headers
> info
> io
> ipcache
> mem menu
> netdb
> non_peers
> objects
> pconn
> peer_select
> redirector
> refresh
> server_list
> shutdown *
> store_digest
> storedir
> utilization
> via_headers
> vm_objects
>
> * Indicates actions which will not be performed without a valid password,
> others can be performed if not listed here.
>
> To disable an action, set the password to "disable".
>
> To allow performing an action without a password, set the password to
> "none".
>
> Use the keyword "all" to set the same password for all actions.
>
> cachemgr_passwd secret shutdown
> cachemgr_passwd lesssssssecret info stats/objects
> cachemgr_passwd disable all
>
>
>
> forwarded_for off
>
>
> *Description*
> Current HTTP/1.1 does not provide any standard way of indicating the client
> address in the request. Since a number of people missed having the
> originating client address in the request, Squid now adds its own request
> header called "X-Forwarded-For" which looks like this: X-Forwarded-For:
> 192.1.2.3|unknown
>
> If set, Squid will include your system's IP address or name in the HTTP
> requests it forwards. By default it looks like this:
> X-Forwarded-For: 192.1.2.3
> If you disable this, it will appear as X-Forwarded-For: unknown
>
>
>
> > buffered_logs on
>
> *Description*
> Some log files (cache.log useragent.log) are written with stdio functions,
> and as such they can be buffered or unbuffered. By default they will be
> unbuffered. Buffering them can speed up the writing slightly (though you are
> unlikely to need to worry).
>
>
>
> visible_hostname ibunk.dk.co.id
>
>
> *Description*
> If you want to present a special hostname in error messages, etc then define
> this. Otherwise, the return value of gethostname () will be used. If you
> have multiple caches in a cluster and get errors about IP-forwarding, you
> must set them to have individual names with this setting. When the error
> message appears in the browser, it will show as it is generated from the
> visible_hostname.
>
>
> ftp_user [EMAIL PROTECTED]
>
>
> *Description*
> This tag can be used if you want the anonymous login password to be more
> informative. You can set this to something reasonable for your domain, like
> [EMAIL PROTECTED] The reason why this is domain less by default is
> that the request can be made on the behalf of a user in any domain,
> depending on how the cache is used. Some ftp servers also validate the email
> address.
>
>
> mohon penjelasannya ya, maklum masih pelajar sekolah
> >
> > Send instant messages to your online friends http://uk.messenger.yahoo.com
> >
> >
> >
> *yang masih belum paham squid dan nggak bisa basa inggris*
*yang ngga tau squid dan ngga paham yang diposting di atas :D*
saran saya anda join saja di threadnya squid di forum.linux.or.id.
saya lihat [IMHO] thread ini lumayan banyak peserta dan postingannya.
sampe ada diskusi konfig super squid segala :D
#maaf ngga membantu
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
--
no spam please
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/balinux/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
