barebox  

Messages by Thread

• [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes Lucas Stach
• [PATCH] graphic_utils: Fix freeing uninitialzed pointer in fb_open() Sascha Hauer
• Terasic DE0 Nano SoC / SoCkit confusion Ian Abbott
  • Re: Terasic DE0 Nano SoC / SoCkit confusion Steffen Trumtrar
  • Re: Terasic DE0 Nano SoC / SoCkit confusion Ian Abbott
• [PATCH 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable Uwe Kleine-König
  • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler Uwe Kleine-König
  • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions Uwe Kleine-König
• intel efi system too slow Giorgio Dal Molin
  • Re: intel efi system too slow Sascha Hauer
• [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi" Ulrich Ölmann
  • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted Ulrich Ölmann
  • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted Uwe Kleine-König
  • Re: [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted Ulrich Ölmann
  • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted Ulrich Ölmann
  • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi" Ulrich Ölmann
  • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted Ulrich Ölmann
  • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted Ulrich Ölmann
  • Re: [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi" Ulrich Ölmann
• [PATCH] OMAP_GPMC: this driver depends on MTD Juergen Borleis
  • Re: [PATCH] OMAP_GPMC: this driver depends on MTD Sascha Hauer
• [PATCH] UBI: attach: add missing newline at end of pr_err() Marc Kleine-Budde
  • Re: [PATCH] UBI: attach: add missing newline at end of pr_err() Sascha Hauer
• [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line() Nikita Yushchenko
  • [PATCH 3/3] fbtest: add gradients pattern Nikita Yushchenko
  • Re: [PATCH 3/3] fbtest: add gradients pattern Sam Ravnborg
  • Re: [PATCH 3/3] fbtest: add gradients pattern Sascha Hauer
  • [PATCH 2/3] fbtest: add solid pattern Nikita Yushchenko
  • Re: [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line() Chris Healy
• [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL Philipp Zabel
  • Re: [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL Sascha Hauer
• [PATCH v2 01/12] ARM: vexpress: always build relocatable image Lucas Stach
  • [PATCH v2 02/12] of: populate clock providers before other devices Lucas Stach
  • [PATCH v2 09/12] vexpress: use device tree provided by QEMU if available Lucas Stach
  • [PATCH v2 05/12] mci: mmci: add DT support Lucas Stach
  • [PATCH v2 04/12] clocksource: sp804: silently ignore secondary instaces Lucas Stach
  • [PATCH v2 10/12] vexpress: add bootstate node to the device tree Lucas Stach
  • [PATCH v2 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices Lucas Stach
  • [PATCH v2 03/12] clk: versatile: add basic clocks Lucas Stach
  • [PATCH v2 11/12] of: base: add function to copy a device tree node Lucas Stach
  • [PATCH v2 08/12] docs: add qemu vexpress Lucas Stach
  • [PATCH v2 06/12] ARM: vexpress: switch to DT probe and multi-image build Lucas Stach
  • [PATCH v2 07/12] ARM: vexpress: regenerate config Lucas Stach
  • Re: [PATCH v2 01/12] ARM: vexpress: always build relocatable image Sascha Hauer
• [PATCH] efi: add missing Kconfig selects Enrico Jorns
  • Re: [PATCH] efi: add missing Kconfig selects Sascha Hauer
• [PATCH] Marvell: implement marvell_of_reg_init Clément Leger
  • Re: [PATCH] Marvell: implement marvell_of_reg_init Sascha Hauer
• [PATCH 0/5] sandbox: add gpio support with libftdi1 Antony Pavlov
  • [PATCH 2/5] sandbox: add gpio support with libftdi1 Antony Pavlov
  • Re: [PATCH 2/5] sandbox: add gpio support with libftdi1 Sascha Hauer
  • [PATCH 1/5] sandbox: avoid symbol conflict for {open,read,close}dir Antony Pavlov
  • [PATCH 3/5] sandbox: parse libftdi options Antony Pavlov
  • Re: [PATCH 3/5] sandbox: parse libftdi options Sascha Hauer
  • Re: [PATCH 3/5] sandbox: parse libftdi options Antony Pavlov
  • Re: [PATCH 3/5] sandbox: parse libftdi options Sascha Hauer
  • Re: [PATCH 3/5] sandbox: parse libftdi options Antony Pavlov
  • Re: [PATCH 3/5] sandbox: parse libftdi options Sascha Hauer
  • [PATCH 4/5] sandbox_defconfig: enable gpio, spi, i2c and led stuff Antony Pavlov
  • [PATCH 5/5] sandbox: dts: add i2c and spi libftdi1 bit-bang example Antony Pavlov
• [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning Antony Pavlov
  • Re: [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning Sascha Hauer
• [PATCH v2 0/3] e1000: fix access to companion flash chip Uwe Kleine-König
  • [PATCH v2 3/3] e1000: Don't poll for FLSWCTL.GLDONE before starting a flash transaction Uwe Kleine-König
  • [PATCH v2 2/3] e1000: implement support for smaller flash chips Uwe Kleine-König
  • [PATCH v2 1/3] e1000: implement register mapping for E1000_FLSW{CTL, DATA, CNT} Uwe Kleine-König
  • Re: [PATCH v2 0/3] e1000: fix access to companion flash chip Sascha Hauer
• [PATCH] elf.h: Use EI_NIDENT instead of numeric value Antony Pavlov
  • Re: [PATCH] elf.h: Use EI_NIDENT instead of numeric value Sascha Hauer
• [PATCH 0/3] e1000: access to flash on i210 Uwe Kleine-König
  • [PATCH 2/3] e1000: implement support for smaller flash chips Uwe Kleine-König
  • Re: [PATCH 2/3] e1000: implement support for smaller flash chips Andrey Smirnov
  • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}} Uwe Kleine-König
  • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}} Andrey Smirnov
  • Re: [PATCH 1/3] e1000: implement register mapping for E1000_{EERD,FLSW{CTL,DATA,CNT}} Uwe Kleine-König
  • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle Uwe Kleine-König
  • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle Uwe Kleine-König
  • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle Andrey Smirnov
  • Re: [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle Uwe Kleine-König
• again [PATCH v1 2/2] command ccrypt Gerd Pauli
• [PATCH v1 1/2] ccryptlib: library for encrypting/decrypting Gerd Pauli
• [PATCH v1 2/2] command ccrypt Gerd Pauli
• [PATCH] regmap: port regmap_update_bits from linux Steffen Trumtrar
  • Re: [PATCH] regmap: port regmap_update_bits from linux Sascha Hauer
• [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes Steffen Trumtrar
  • Re: [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes Sascha Hauer
• [PATCH v1] writef: added command to write content of variable to file Gerd Pauli
  • Re: [PATCH v1] writef: added command to write content of variable to file Sascha Hauer
• v2017.10.0 Sascha Hauer
• Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Marcel Hamer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Sascha Hauer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Marcel Hamer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Ian Abbott
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Marcel Hamer
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled gianluca
  • Re: Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled Marcel Hamer
• [PATCH v1] MIPS: tplink-wdr4300_defconfig: enable RATP Oleksij Rempel
• [PATCH v1 1/2] clk: add ar9344 clock driver Oleksij Rempel
  • [PATCH v1 2/2] MIPS: dts: ar9344: add pll node Oleksij Rempel
  • Re: [PATCH v1 1/2] clk: add ar9344 clock driver Sascha Hauer
• [PATCH] net: ag71xx: define parent devices Oleksij Rempel
  • Re: [PATCH] net: ag71xx: define parent devices Sascha Hauer
• how to persistently save config values Giorgio Dal Molin
  • Re: how to persistently save config values Oleksij Rempel
  • Re: how to persistently save config values B Gol
  • Re: how to persistently save config values Giorgio Dal Molin
  • Re: how to persistently save config values Sascha Hauer
  • Re: how to persistently save config values Giorgio Dal Molin
  • Re: how to persistently save config values Sascha Hauer
• [RFC v4 00/10] add initial RISC-V architecture support Antony Pavlov
  • [RFC v4 02/10] RISC-V: add Erizo SoC support Antony Pavlov
  • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support Oleksij Rempel
  • Re: [RFC v4 02/10] RISC-V: add Erizo SoC support Antony Pavlov
  • [RFC v4 05/10] RISC-V: erizo: add DEBUG_LL support Antony Pavlov
  • [RFC v4 03/10] RISC-V: add low-level debug macros for ns16550 Antony Pavlov
  • [RFC v4 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
  • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor Oleksij Rempel
  • Re: [RFC v4 04/10] RISC-V: add nmon nano-monitor Antony Pavlov
  • [RFC v4 06/10] RISC-V: erizo: enable NMON Antony Pavlov
  • [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
  • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Oleksij Rempel
  • Re: [RFC v4 08/10] RISC-V: add erizo_generic_defconfig Antony Pavlov
  • [RFC v4 09/10] scripts: add nmon-loader Antony Pavlov
  • [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Oleksij Rempel
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Oleksij Rempel
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Daniel Schultz
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Daniel Schultz
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Daniel Schultz
  • Re: [RFC v4 01/10] Add initial RISC-V architecture support Antony Pavlov
  • [RFC v4 10/10] Documentation: add RISC-V docs Antony Pavlov
  • Re: [RFC v4 10/10] Documentation: add RISC-V docs Oleksij Rempel
  • Re: [RFC v4 10/10] Documentation: add RISC-V docs Antony Pavlov
• [PATCH v2] Add i.MX6ull EVK Support Sascha Hauer
  • [PATCH 2/2] ARM: Add i.MX6ull evk support Sascha Hauer
  • [PATCH 1/2] ARM: i.MX6ul: Add SoC specific lowlevel_init function Sascha Hauer
• [PATCH v2 0/3] state: add support for pre-mainline state format Uwe Kleine-König
  • [PATCH v2 3/3] state: storage: direct: skip writing meta data if this makes data fit Uwe Kleine-König
  • [PATCH v2 2/3] state: new backend format "rawcompat" Uwe Kleine-König
  • [PATCH v2 1/3] Documentation: state: adapt description to reality Uwe Kleine-König
  • Re: [PATCH v2 1/3] Documentation: state: adapt description to reality Sascha Hauer
• barebox fb console on an EFI system Giorgio Dal Molin
• [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function Sascha Hauer
  • [PATCH 2/2] i.MX6ull evk support Sascha Hauer
  • Re: [PATCH 2/2] i.MX6ull evk support Lucas Stach
  • Re: [PATCH 2/2] i.MX6ull evk support Sascha Hauer
  • Re: [PATCH 2/2] i.MX6ull evk support Lucas Stach
  • Re: [PATCH 2/2] i.MX6ull evk support Sascha Hauer
  • Re: [PATCH 2/2] i.MX6ull evk support Philipp Zabel
  • Re: [PATCH 1/2] ARM: i.MX6ull: Add SoC specific lowlevel_init function Lucas Stach
• usbgadget: fastboot: Allow to automatically export bbu handlers Sascha Hauer
  • [PATCH 12/12] usbgadget autostart: add usbgadget.fastboot_bbu to automatically export bbu handlers Sascha Hauer
  • [PATCH 03/12] file_list: Allow only unique names on list Sascha Hauer
  • [PATCH 06/12] file_list: Add error messages Sascha Hauer
  • [PATCH 08/12] bbu: Add function to iterate over registered handlers Sascha Hauer
  • [PATCH 11/12] fastboot command: Add -b option to export bbu handlers Sascha Hauer
  • [PATCH 01/12] file_list: Add function to add an entry to the list Sascha Hauer
  • [PATCH 09/12] usbgadget command: catch errors when parsing the file list Sascha Hauer
  • [PATCH 04/12] file_list: Fix memory leak in failure path Sascha Hauer
  • [PATCH 07/12] usbgadget: fastboot: Use function to find file_list entry by name Sascha Hauer
  • [PATCH 10/12] usbgadget: fastboot: Allow to automatically export the bbu handlers Sascha Hauer
  • [PATCH 02/12] file_list: Add function to get entry by its name Sascha Hauer
  • [PATCH 05/12] file_list: Add GPL header to file Sascha Hauer
• usbgadget fix some crashes Sascha Hauer
  • [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully Sascha Hauer
  • Re: [PATCH 1/4] usbgadget: autostart: Handle errors in file list gracefully Oleksij Rempel
  • [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails Sascha Hauer
  • Re: [PATCH 4/4] usbgadget: unregister when usb_composite_probe() fails Oleksij Rempel
  • [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done Sascha Hauer
  • Re: [PATCH 3/4] usbgadget: only set to peripheral mode when error checking is done Oleksij Rempel
  • [PATCH 2/4] usbgadget: do not register when no functions present Sascha Hauer
  • Re: [PATCH 2/4] usbgadget: do not register when no functions present Oleksij Rempel
• barebox on an intel efi system Giorgio Dal Molin
  • Re: barebox on an intel efi system Oleksij Rempel
  • Re: barebox on an intel efi system Giorgio Dal Molin
• [PATCH 0/3] gpiolib: introduce gpio initializer Uwe Kleine-König
  • [PATCH 3/3] gpiolib: introduce gpio initializer Uwe Kleine-König
  • [PATCH 1/3] gpiolib: reorder functions Uwe Kleine-König
  • [PATCH 2/3] gpiolib: introduce helper functions working on gpio_info structs Uwe Kleine-König
  • Re: [PATCH 0/3] gpiolib: introduce gpio initializer Sascha Hauer
  • Re: [PATCH 0/3] gpiolib: introduce gpio initializer Uwe Kleine-König
• [PATCH 0/2] state: add support for pre-mainline state format Uwe Kleine-König
  • [PATCH 2/2] state: storage: direct: skip writing meta data if this makes data fit Uwe Kleine-König
  • [PATCH 1/2] state: new backend format "rawcompat" Uwe Kleine-König
• [PATCH 1/2] scripts: imx imx-usb-loader: Add support for i.MX6ull Sascha Hauer
  • [PATCH 2/2] scripts: imx imx-usb-loader: Fix last transfer error message Sascha Hauer
• [PATCH] remove checks for xzalloc() returning NULL Uwe Kleine-König
  • Re: [PATCH] remove checks for xzalloc() returning NULL Sascha Hauer
• [PATCH] pinctrl: mxs: fix error message to mention right property name Uwe Kleine-König
  • Re: [PATCH] pinctrl: mxs: fix error message to mention right property name Sascha Hauer
• [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S" Marc Kleine-Budde
  • Re: [PATCH] imx-bbu-nand-fcb: read_firmware_all(): Spell "Secondary firmware" with a capital "S" Sascha Hauer
• [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file Uwe Kleine-König
  • Re: [PATCH] ARM: i.MX53 QSB: drop phy reset handling in board file Sascha Hauer
• [PATCH v2] gpiolib: check validity for gpio_info in *_active() Uwe Kleine-König
  • Re: [PATCH v2] gpiolib: check validity for gpio_info in *_active() Sascha Hauer

• Earlier messages